Illumination and Electrification work of Chitai Goljyu Temple Almora under Manas Khand Mandir Mala Mission (Phase-I)

Amount

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

…..Do……… but Size 2 X 4 sq. mm + 1 X 4 sq. mm earth wire .

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing of following sizes of MEDIUM CLASS PVC conduit along with accessories in surface/recess,or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

…..Do……… but Size 32 mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 32 amps DP

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25/32 amps

S/F of surface/ recess type Cable Junction Boxes IP 66/67 with PE Inlay of PC (polycarbonate) with integrated membranes/metric knock outs for cable entry complete in all respect .dimensions W 104 x H 104 x D 70(Tolerance ± 10%)

S/F of outdoor Type (IP65) surface/ recess type 12/18 modules x 4(4NO. Of Horizontal Rows for Incomer,Sub incomer and Outgoings) Per Phase Isolation Distribution Board of PC (polycarbonate),duly powder painted, inclusive of , neutral & earth links,complete in all respect. with 32 Amp FP MCB as incomer

S/F of outdoor Type (IP66) surface/ recess type Empty Box /Enclosure of PC (polycarbonate) for LED Drivers, Decoders and power supply, etc complete in all respect .dimensions W 600 x H 600 x D 170 (Tolerance ± 10%)

Supplying of All Lights fixtures shall be complete with LED lamps with all required accessories. Samples of all the fixtures with all available colour shall be submitted to the architect/ client/ Project Manager before supply & approval is taken. Please check the fixtures final quantity from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering. S/F 20-25 Watt , IP 65 /66 LED post-top with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination

SITC of LED bollard 3000K 230-240Vac 50-60Hz CRI > 80 Input power: 10 - 12 W Height 800-1000mm, Electronic driver ON/OFF CE and RoHS compliance TYPE: Bollard, IP rating IP65, impact resistance IK10. Material Characteristics : Extruded aluminium bottom pipe Ø100 x H800mm with polycarbonate diffuser and integral base plate Ø180 with PG gland. Luminaire contains built in LED modules. Operating ambient temperature range is from -20°C to +40°C. Lumen output 300 lm, light source 96 power LEDs. Resistance to heat and fore for plasticpart should be 850 degree celcius. Housing Color Dark grey RAL 7043. CCE, CE and RoHS compliance. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted.

SITC of Inground mounted 18W RGBW(w=4000K) luminaire made up of die-casting with aluminum housing stainless steel trim frame with high quality tempered glass cover (10-12mm), Dimension Ø180mm H175mm with recess mounting box. The luminous flux of the luminaire is in the range of 600lm±10%, Beam angle 20°. The ingress protection is IP67(Silicon Gasket) and impact resistance of IK10. . Operating temperature of -40 ~ +50°C with CE/CB/EMC approbation. Life of the fixture should be 50K hours L70B50 @ ta 35°C. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

Supply, installation, testing & commissioning of 1000mm long rigid architectural RGBW (W=4000K) LED Linear light with integral driver & housing of Extruded aluminum alloy 6063 grade & die-cast aluminum end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 45mm & height of 55mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminum & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall not be greater than 3.5KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 16°X35°(±10%) beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4, THD<20% & inrush current of Max 60A/450μs (cold start 230Vac/50Hz measured at 50% Ipeak). The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors & metal cages. The luminaire shall have system wattage 45-50W (±10%) and system lumen output of not less than 1600 lumens.. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the following certifications/reports for approval: product data sheets, LM79-IP-IK-Vibration resistance test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables & necessary end plates / covers.

SITC of Inground mounted 18W RGBW(w=4000K) luminaire made up of die-casting with aluminum housing stainless steel trim frame with high quality tempered glass cover (10-12mm), Dimension Ø180mm H175mm with recess mounting box. The luminous flux of the luminaire is in the range of 600lm±10%, Beam angle 10°. The ingress protection is IP67(Silicon Gasket) and impact resistance of IK10. .Operating temperature of -40 ~ +50°C with CE/CB/EMC approbation. Life of the fixture should be 50K hours L70B50 @ ta 35°C. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

SITC of Endcap female connectors for closing the connections (min 20 nos in 1 packet)

SITC of Endcap Male connectors for closing the connections (min 20 nos in 1 packet)

SITC of 4P DMX jumper cable for interconnecting the façade luminaires having length min 2m length (min 10 nos in 1 packet)

SITC of 4P DMX leader cable for connecting luminaire with power supply having length min 2m length (min 10 nos in 1 packet

SITC of Compact master Content Program Controller (DMX controller) with capability to control minimum 8 DMX512 universes, playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. The Content Program Controller shall have integrated LCD display & support IR remote control. The dimensions of the Content Program Controller shall be approximately 278X193X66 mm (±10%). It should be housed in aluminum casing. The Input voltage shall be 12VDC & shall have 2 RJ45 ports on Input side. The IEC classification shall be Class III. It should operate on DM512 protocol. The output shall have 8 X 3P lockable terminals. The power consumption shall be 8W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220-240V to 12V DC power supply. The IP rating of content program controller shall be IP20 & shall comply to CE, CB & CQC certifications. The DMX controller/content program controller shall be from the same make/brand/manufacturer as that of façade lighting luminaires. The working temperature range shall be -30°C to 50°C. The successful bidder shall submit the technical data sheet for approval before supply of material.

SITC of DMX splitter 6 channel isolated outputs, the splitter can split the DMX signals into 6 directions by boosting the data signals connected in the daisy chain in the network.

Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 3.5C x 70sq. mm AL armoured Cable

…..Do……… but Size 4 C x 10sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 6 sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 4 sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 2.5 sq. mm Cu armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm (38mm) AL armoured Cable

Supply and Fixing heavy duty double compression brass gland and lugs end terminations, complete inall respect, for the following size cable . 4 C x 10sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 6 sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 4 sq. mm Cu armoured Cable

…..Do……… but Size 3 C x 2.5 sq. mm Cu armoured Cable

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required .63 mm dia (OD-63 mm & ID-51 mm nominal)

…..Do……… 90 mm dia (OD-90 mm & ID-76 mm nominal

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

SITC of 30 KVA,Single Phase Silent,240V Type Liquid cooled D.G.Set(CPCB-IV-Approved) with AMF,With Suitable Rating of Diesel Engine directly coupled with suitable rating of Alternator,inbuilt Fuel tank,Battery,Air Filter, Silencer, and fitted with other standard accessories, Complete with 2 No. Cu Plate Earthing ,2 No. GI Plate Earthing ,Suitable Size(Directed by Engineer in charge) of Power Cable with iin 60Mtr. Length and Making of of Suitable Size(Directed by Engineer in charge) of Foundation,and Complete in all Respect with standard warrenty

Supply,installation, testing and commissioning of the 30 KVA servo voltage stablizer Oil cooled (with oil) of following ratings, 3-phase, Copper winding, 50HZ Frequency, Unbalanced input voltage and unbalanced load, Volt/ampere meter CT's, input voltage range- 360V-480V, output voltage range- 410-420V adjustable with High Low Cutoff System and Bypass Facility

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply& Fixing of 4.5 KG CO2 Fire exitinguisher with all accessories as required.

Supply& Fixing of 4kg Mild Steel Red ABC Type Fire Extinguisher with all accessories as required.

Supply & fixing in position fire buckets (5 Nos.) duly filled with dry fine sand & fixed on Angle iron frame as required. The fire buckets shall be painted Red from outside & white from inside, one handle at the bottom to hold complete as required.

Delivering Light Planning (BID ID -388061)

FRIENDS ELECTRICALS (BID ID -388003)