Tender of ARC for 11 / 22 XLPE underground cable fault Rectification with providing 11 / 22 KV heat shrinkable type outdoor end termination & straight through joint kit suitable for 3c x 185 / 240 Sq MM cable for under the Ankleshwar Industrial Sdn & all other sub division under jurisdiction of Industrial Division Ankleshwar.

Name of Work:- :Invite tender of ARC for 11 / 22 XLPE underground cable fault Rectification with providing 11 / 22 KV

heat shrinkable type outdoor end termination & straight through joint kit suitable for 3c x 185 / 240 Sq MM cable for under

the Ankleshwar Industrial Sdn & all other sub division under jurisdiction of Industrial Division Ankleshwar.

Sr. Description of Work. Qty. Unit Rate Amount in Rs.

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in

1 any type of soil for laying of cable of size up to 240 mm2 (For additional cable 200 Meter

mm additional width shall be considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 &

preparation of sand layer 100mm thick, in the cable trench & covering the cable

with 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round muffs

and providing and fixing of 4inch width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from ground surface

after laying cable in trench. This will provide indication that electric cable is passing

underground so as to protect cable from mechnical injuries, refilling the same, as

per Instruction of Engineer in Charge (EIC).

Labour work for RCC concreting on disputed location and repairing of damage

3 portion of road crossing for the work carried out for roads crossing as well as cmt

concreting & muffing of poles including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick x

650 mm height embedded in earth at least 300 mm below & 350 mm above ground

level respectively at distance approx. 50 meters along the length of cable. The RCC

concreting (1:2:4)(all necessary materials will be in bidder's scope) of route marker

is to be carried out 300 mm width x 150 mm thick x 300 mm below ground level as

per instruction of EIC. The route marker should be with name of company with

approved yellow colour-DGVCL. The distance from marker to cable and cable depth

with feeder name etc., marked with arrow sign is to be painted on it.The route

marker is to be fixed at location near to any fixed permanent location (not necessary

to fix exact on top of cable) as per instruction of EIC.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe

with pit to be filled with salt & coke and construction of chamber as per

5 DGVCL Drg. No. dg /100 for DP and cable. The earthing pit should be joined No

with cable by G.I. strip of size 1” width & 2 mm thick. All material GI pipe,

Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor/indoor) for up to 11kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor/indoor) for up to

kV 3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x

8 mm2 size XLPE cable. (Using approved make outdoor type cable kit as per DGVCL No

technical specification.)

Supply & fixing of heat shrinkable straight through joint type for 11kV 3C x

9 mm2 size XLPE cable. (Using approved make outdoor type cable kit as per DGVCL no

technical specification.)

Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x

10 mm2 size XLPE cable as per DGVCL technical specification No.

Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x

11 mm2 size XLPE cable as per DGVCL technical specification) No.

Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x

12 mm2 size XLPE cable as per DGVCL technical specification) No.

Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x

13 mm2 size XLPE cable as per DGVCL technical specification No.

Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2 size

14 XLPE cableas per DGVCL technical specification. No.

Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x

15 mm2 size XLPE cable as per DGVCL technical specification No.

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep

joint pits for installation of 11kV / 22kV Straight through joints as per instruction of

16 engineer-in-charge & covering the cable with 150 mm dia (Outer), thickness 25 no

mm, 1.0 meter long RCC half round muffs & refilling same as per instruction of

Testing of cable at various points and commissioning the feeder as per instruction of

engineer-in-charge. Test result shall be submitted by contractor with bill.

In Words:- Twenty Five lack only.

Note:(1) Above rates are inclusive of all taxes.

(2) Agencies has to supply and provide indoor kit & outdoor kit & straight joint as per joint as per DGVCL technicle

(3) Guarantee period of straight joint and end terminaton would be 24 month from the date of charging of cable.

SIGN OF CONTRACTOR Executive Engineer (IND),

DGVCL, Ind. Division, Ankleshwar.