REPAIRS TO LEAKAGE SEEPAGES IN SUNKEN FLOOR IN TOILET BATHROOM AND KITCHEN SANITARY FITTINGS BATH ROOM DOORS REPLACEMENT OF INTERNAL WATER PIPE LINES PVC OHT TILES IN FLOORS DADO AND OTHER RELATED WORK IN OMQs 14 AFH and OFFICERS MESS AT AFA

Amount

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing debris off the premises complete all as specified and directed.

Demolition of reinforced cement concrete chimneys, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) and removing debris off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) average 30 mm thick mixed with water proofing compond, finished even and smooth without using extra cement in sunken floor portion complete all as specified and directed.

M&L for rendering 15mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound finished even and smooth in sunken portion without using extra cement complete all as specified and as directed.

M&L for primming the surfaces and providing 3mm thick APP membrane by torching and applying evenly a tack coat of bitumen 85/25 @ 1.20kg / sqm for sunken treatment including providing GI pipe of 40 mm dia light grade spout projecting atleast 200mm from external wall complete all as directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) in floors of 75 mm thick for pavings, hardstaning etc finished fair and even without using extra cement complete all as specified and directed.

M&L for providing cement concrete, 1:2:4 Type B1 ( using 20 mm graded stone aggregate) in bands, plinth courses, parapets,cills , copings, kneelers, apex stones, like including weathering, slightly rounded for chamfered angles and throating and necessary form work complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removing debris off the premises complete all as specified and directed.

M & L Pre-cast cement concrete block masonry 1:3:6 Type C-1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and set in CM (1:6) complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), in damaged parapet, chamber and similar work of any description, complete all as specified and directed.

M&L for half thick brick wall brickwork with subclass 'B' bricks, straight or curved on plan to any radius , built in CM (1:4), in damaged parapet, chamber and similar work of any description, complete all as specified and directed.

Taking up or down PVC/steel tubing and connections upto 25mm bore, for refixing or removal complete all as specified and directed.

S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

Refixing of 15 mm old steel tubing and connections with all fittings in new or old position to Walls, ceiling and floors etc complete all as specified and as directed. Note : Serviceable GI tubing & fittings obtained from item No 13 shall be reused

S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc all as specified and as directed.

Refixing 20 mm old steel tubing and connections with all fittings in new or old position Complete to Walls, ceiling and floors etc complete all as specified and as directed. Note : Serviceable GI tubing & fittings obtained from item No 13 shall be reused

S&F of 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc all as specified and as directed.

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish off the premises complete all as specified and directed by Engr -in- charge.

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , laid over and including screed bed in CM (1:6) 15mm thick complete all as specified and as directed.

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , laid over and including screed bed in CM (1:6) 15mm thick complete all as specified and as directed.

S&F Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, laid over and including screed bed in CM (1:6) 15mm thick all as specified and directed.

S&F of Glazed ceramic coloured tiles of size, 450 x300x7mm thick, in vertical surfaces of dados, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/backing coat in CM (1:4) 10mm thick complete complete all as specified and directed.

M&L for Granite slab 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment, laid over and including screed bed in CM (1:6) 20mm thick complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed to walls or laid in floors. complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including lime concrete bedding and making good to floor complete all as specified and directed.

S&F in repairs PVC flush pipe (Long bend length approx 1 mtr) 32 mm dia for low level flush tank (High density) of standard make suitable for IWC fixed in repairs complete all as specified and directed.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white and connecting to drain & flushing pipe, including plastic water closet seat, (white) closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste pipe etc complete all as specified and as directed.

S&F in repairs of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts complete all as specified and directed.

S&F in repairs of CP Bib taps 15mm bore cast copper alloy with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs of stop valves / Angle valve 15 mm dia, cast copper alloy fancy type CP screwed down high pressure with handle screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs of Gun metal globe or gate valves of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs of Gun metal globe or gate valves of 25mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) complete all as directed.

S&F in repairs of Ball valve 25mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 455gms ) complete all as directed.

S&F in repairs of brass chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm complete all as specified and directed.

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle, long bend including brackets complete all as specified.

S&F in repairs of PVC connection 15mm size with brass CP nuts of length 450 mm complete all as directed.

S & F of Rotational moulded PVC water storage tanks of 250 ltrs capacity (cylindrical vertical with screw type closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 250 ltrs complete all as specified and directed.

S & F of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with screw type closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and directed.

S & F Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with screw type closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

S&F in repairs of PVC Lids (screw type) for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I.

S&F in repairs PVC Nipple / flange 20 mm suitable for HDPE water tank (Minimum weight 45 gms) all as specified and directed.

S&F in repairs Nipple / flange 25 mm suitable for HDPE water tank (Minimum weight 65gms) all as specified and directed.

S&F in repairs of Brass CP wall mixer 'hot' & cold water screwed down for iron pipe etc complete all as specified and directed.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repair of centre hole basin mixture 15 mm bore dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe and fixed (Cat Pat No : Jaguar - CQT-23169B) or equivalent.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long complete all as specified.

S&F in repairs of brass chromium plated towel rail 600mm long "D" type fixed with suitable steel screw complete all as specified and directed.

S&F in repairs of towel ring 150 mm dia type ABS body chromium plated fixed with and including chromium plated brass screws all as specified and as directed.

S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and as directed.

S&F in repairs toilet paper holder ABS body chromium plated box type complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S& F in repairs of Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including waste pipe, flush pipe, grating and Union for discharge pipe, etc all as specified and as directed.

S&F in repairs of stainless steel grating hinge type 100 mm dia complete all as specified and as directed. Make : Cat Part FG92/93 of Pearl / Precision or equivalent

S&F in repairs Plastic water closet seatcover, (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinged device etc complete all as specified and as directed.

S&F in repairs of sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specifed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified.

S & F of glass dividing strip 3mm thick of 38 mm wide inserted in position, conform to design complete all as specified.

S&F in repairs of cast iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 etc complete all as specified and as directed.

Taking down eaves guttet and rain water pipes (any size or pattern) including all fittings,heads,shoes,bends,swan necks etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) all as specified and directed.

S&F in repairs of cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.

S & F UPVC (SWR) type 'B' pipes 110 mm bore single socketted in any length fixed on walls floors, ceiling etc with fixing accessories complete all as specified and as directed.

S & F UPVC (SWR) bends any radius suitable for 110mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) branch piece single (Single Y) equal or unequal 110 mm dia all as specified and directed

S &F UPVC (SWR) pipes 75 mm bore single socketted in any length fixed on walls floors, ceiling etc with fixing accessories complete all as specified and as directed.

S & F UPVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and as directed.

S & F UPVC (SWR) bends any radius with access door suitable for 75mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) branch piece single (Single Y) equal or unequal 75 mm dia all as specified and directed

S&F PVC (SWR) reducer 110 mm bore all as specified and directed

Taking down cement plaster in wall/ceilling surfaces of brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water and removing rebbish off the premises complete all as specified and as directed.

M&L for plastering in internal wall surfaces of 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) all as specified and as directed.

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 (5mm thick with WPC over 10mm thick cement plaster in two layers) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on concrete surfaces of ceilling finished even and smooth (without using extra cement) all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls including cornices by applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of newly plastered ceilling surfaces and applying three coats of white wash complete all as specified and as directed.

S&Fin repairs of CP Bib taps two way 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified.(Make ; Jaguar or equivalent)

S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule complete all as specified

S & F in for repairs of Gun of health faucet ABS body, CP to be fixied to exixting health faucet pipe complete all as specified and directed.( Make : CERA) or equvalant

M&L for repairs of holder stand of health faucet ABS body, CP to be replaced to exixting holder stand of health faucet complete all as specified and directed.( Make : CERA) or equvalant

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc n exc 250 ltrs capacity in litres and write date of cleaning and due date of cleaning on OHT all as directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 Litres capacity in litres and write date of cleaning and due date of cleaning on OHT all as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 litres capacity in litres and write date of cleaning and due date of cleaning on OHT all as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 1000 and n exc 2000 litres capacity and write date of cleaning and due date of cleaning on OHT all as directed.

S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls all as directed by Engr-in -charge

S&F in repairs PVC mirror Cabinet of size 500mm x400mm with necessary fittings and hinges of Prayag Cat No 556 or equvalent all as directed by Engr -in- charge

S&F in repairs of fancy type Bib tap standard of PTMT 15mm high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 105 gms). Make: Prayag or Equivalent, all as directed by Engr-in-charge

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen platform and shelves in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Note: Reinforcement shall be measured seperately

S&F for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S&F in repair Stainless Steel Dish/plate Display Rack of size 750x600x250mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rawl plugs and brass screws at suitable places, etc complete all as specified and as directed. Make: Prayag, Cat No: P-330 or Silver shine, Cat No: SSKPR-311 or any Equivalent make as approved by GE.

S&F in repair Stainless Steel Dish/plate Display Rack of size 750x900x250mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rawl plugs and brass screws at suitable places, etc complete all as specified and as directed. Make: Prayag, Cat No: P-348 or Silver shine, Cat No: SSKPR-311 or any Equivalent make as approved by GE.

Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including removing the materials from site and making good the disturbed portion of walls/floors ceiling etc with painting/colour washing/distempering all as per existing specification of the surroundings complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor and including rigid PVC concealed conduit of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls or in chases etc. including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thick for fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for the following :- Note Cutting and chasing of grooves and making good stone masonry is deemed to be included in quoted rate.

(a) One light point controlled by one switch

(b) One three pin socket 5 Amps plug point on same board

S&F in repairs of ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.

S&F in repair of Switch Piano type polycorbonate white 1 way, 6A, 240Volts complete all as specified and as directed.

S&F in repair of Socket outlet polycorbonate white 6A - 2/3 pin complete all as specified and as directed.

S&F surface mounting / wall mounted LED tube light fitting 1x20 Watt (Lumen output not less than 1980 lumen) high efficiency, anti glare, maintenance free operation including LED driver, all accessories internally pre-wired, connecting up with three core twisted flexible copper conductor cable white colour with suitable size including taking out old unserviceable one complete all as specified and as directed.

Deepika Enterprises

Saiansh Associates

GUTHIKONDA BROTHERS