Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-AOC | ₹10.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹11.0 L+₹61,048.19 (5.87%)Rejected-AOC KANNAMBRA GRAMA PANCHAYAT KANNAMBRA P O PALAKKAN DIST PIN 578 SPS | 578686 | ₹11.0 L+₹61,048.19 (5.87%) | L2 | Rejected-AOC L2 |
| 3 | L3₹12.1 L+₹1.7 L (16.5%)Rejected-AOC KANNAMBRA GRAMA PANCHAYAT KANNAMBRA P O PALAKKAN DIST PIN 578 SPS | 578686 | ₹12.1 L+₹1.7 L (16.5%) | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | SUBASH CHANDRABOSE V L1 | Sunilkumar.M.M L3 | Swarun D L2 |
|---|---|---|---|---|---|---|
| 1.00Building Renovation | ||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,620 | kg | 182 ₹2,94,840 Lowest | 213.69 ₹3,46,177.8 | 194 ₹3,14,280 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 114.1 | sqm | 798 ₹91,051.8 Lowest | 926.35 ₹1,05,696.54 | 842.14 ₹96,088.17 |
| 1.00 | OD450240/2025-2026:Providing and fixing platform consisting of M.S.tubular frame and required board, including
providing and fixing of frame work made of M S hollow tubes to centre by 6 mm dia bolts and nuts, including
fixing of studs along both ends of platform fixed flush to wall with suitable anchor fastener or metal s using
8 mm thick multipurpose cement bonded wood particle board(double layer) manufactured as per IS: 14276 with suitable
cement bonded board screws(M.S Hollow Tubes to be paid separately) | 92.55 | per sqm | 1,352 ₹1,25,127.6 Lowest | 1,570.07 ₹1,45,309.98 | 1,427.34 ₹1,32,100.32 |
| 1.00 | 6.38:Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry
100 mm/ 125 mm thick with Grade- I AAC blocks of density 551 to 650 Kg/ cum
conforming to IS: 2185 (Parts-3) in super structure above plinth level up to floor V
level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing
and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry
work. | 2.27 | cum | 10,569 ₹24,033.91 Lowest | 12,264.25 ₹27,888.9 | 11,149.32 ₹25,353.55 |
| 1.00 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 0.25 | cum | 12,743 ₹3,198.49 Lowest | 14,786.35 ₹3,711.37 | 13,442.14 ₹3,373.98 |
| 1.01 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 2.22 | sqm | 723 ₹1,605.06 Lowest | 839.16 ₹1,862.94 | 762.88 ₹1,693.59 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 4.64 | sqm | 350 ₹1,625.4 Lowest | 406.73 ₹1,888.85 | 369.76 ₹1,717.17 |
| 1.01 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 232.89 | sqm | 198 ₹46,112.22 Lowest | 230.18 ₹53,606.62 | 209.26 ₹48,734.56 |
| 1.01 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 86.4 | sqm | 108 ₹9,331.2 Lowest | 125.33 ₹10,828.51 | 113.94 ₹9,844.42 |
Tender Value
₹11.0 L
EMD Value
₹27,525
Closing Date
25 May 2026, 5:00 pmClosed
Asst, Executive Engineer
Office of the Assistant Executive Engineer, LID And EW Sub Division, Alathur Block Panchayath
Retender - Alathur Block Panchayath-2024-25(Health Grant Project) Renovation of Community Health Centre, Vadakkanchery-Proj No.263 in Vadakkanchery G.P
2026_LSGD_851622_1
03/AEE/ABP/2026-27
Open Tender
Civil Works - Buildings
Item Rate
180 days
Alathur Block Panchayath
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹27,525
Yes
14 Aug 2026
18 May 2026
28 May 2026
18 May 2026
25 May 2026
18 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building Renovation | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.002 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.003 | OD450240/2025-2026:Providing and fixing platform consisting of M.S.tubular frame and required board, including
providing and fixing of frame work made of M S hollow tubes to centre by 6 mm dia bolts and nuts, including
fixing of studs along both ends of platform fixed flush to wall with suitable anchor fastener or metal s using
8 mm thick multipurpose cement bonded wood particle board(double layer) manufactured as per IS: 14276 with suitable
cement bonded board screws(M.S Hollow Tubes to be paid separately) | 1 | per sqm | - | - |
| 1.004 | 6.38:Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry
100 mm/ 125 mm thick with Grade- I AAC blocks of density 551 to 650 Kg/ cum
conforming to IS: 2185 (Parts-3) in super structure above plinth level up to floor V
level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing
and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry
work. | - | cum | - | - |
| 1.005 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | - | cum | - | - |
| 1.006 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | - | sqm | - | - |
| 1.007 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.008 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 1 | sqm | - | - |
| 1.009 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1438933.xls
BOQ • 0.32 MB
PA263.pdf
Tender Documents • 0.25 MB
SBD263.pdf
Tender Documents • 1.64 MB
FOT263.pdf
Tender Documents • 0.25 MB
AFF263.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .