Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC | L1 | Accepted-AOC ADMITTED | |
| 2 | L2₹20.9 L+₹2.2 L (11.5%)Rejected-AOC | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹21.8 L+₹3.0 L (15.9%)Rejected-AOC 520 B MUKTAPUKUR NATUN PALLY 24 PGS N | BARRACKPORE | NORTH 24 PGS | WEST BENGAL | 700123 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹24.3 L+₹5.5 L (29.3%)Rejected-AOC | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹24.9 L+₹6.1 L (32.5%)Rejected-AOC | L5 | Rejected-AOC REJECTED |
Tender Value
₹23.7 L
EMD Value
₹47,400
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (S) BARRACKPORE
Commander Works Engineers (Sub) Military Engineer Services PO Barrackpore, Dist 24 Pgns (N) Kolkata 700120 (W.B)
PROVN OF SHED NEAR BLDG NO. PB-43, SENTRY POST WITH WATCH TOWER, COVERED SHED FOR OPEN AREA OF BLDG N0. PB-221 AND SPECIA LREPAIR TO ROOF, EXTERNAL FINISHES IN BLDG NO. NP-76, NP-77, NP-78 AND NP-79 AT MIL STN KANCHRAPARA UNDER GE BARRACKPORE
2022_MES_569285_1
CWE/BKP/30 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
GE BARRACKPORE
AS PER NIT
6 documents required · 6 mandatory
₹500
GE BARRACKPORE
₹47,400
Yes
27 Jan 2023
15 Dec 2022
16 Jan 2023
15 Dec 2022
14 Jan 2023
1 Jan 2023
Amount
Excavating in post holes (for similar holes) each n.exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removal surplus soil to a distance n exc 50m and making good surface.
S&F for rolled mild steel in roof trusses (framed), trussed, purtins, post/columns including distance pieces, cleats etc and cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including nvets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing complete confirming to Fe 410-W (Gde E-250) quality 'A' complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of RED/BRICK RED colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for plain cement concrete (1:3:6), type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and as directed.
M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 15 mm thick screed bed or bedding layer of cement mortar for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.
M & L for vitrified ceramic tiles 'light shade' 10 mm thick(square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth for foundation etc or for shaft well, cesspits, manholes, fire hole etc n.exc 10 sqm on plan and not exceeding 1.5mtr in depth and getting out complete all as directed.
Removing excavated soil n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) as in subbase to flooring complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) finishings surfaces without using extra cement as in floor, plinth protections complete all as specified and as directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B-0 as in DPC complete all as specified and as directed.
M&L for re-inforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) as in foundations including rafts, footings foundations beams, plinth beams bases for columns etc basement slabs under reamed piles and mass concrete complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation, and plinth beams; and similar work; vertical or to batter, including flat rough all as directed.
M&L for re-inforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) as in columns pillers .piers post and struts complete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts struts plers columns and stanchions & beam all as directed.
M&L for re-inforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) as in beams, cantilevers bressumers lintels over 1.5 m span complete all as specified and as directed.
Use and waste of formwork to soffits of, floor or roof beams, beam haunchings girders bressumers lintels cantilever shelves including supports etc also splays between floors and beams etc
M&L for re-inforced cement concrete(RCC) (nominal mix) type B-1 1:2:4 (20 mm graded aggregate) for RCC (M-25) as chajjas complete all as specified and as directed.
Use and waste of formwork to chullah hood, chajjas, troughs and similar items including edges complete all as specified and as directed.
M&L for re-inforced cement concrete (RCC) (nominal mix) type B-1, 1:2:4 (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs floor slabs landings and similar work not exceeding 200 mm thick (horizontal or vertical) complete all as specified and as directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & as directed.
All as per Srl Item No. 26 here-in-before but 6 to 8 mm dia.
All as per Srl Item No. 26 here-in-before but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders.
M&L for 20 mm thick rendering in cement mortar (1:4) including WPC on brick work or concrete surface as in wall including finishing the surfaces even and fair complete all as specified and as directed. (Note : WPC will be measured and paid separately).
M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound liquid
M&L for ceiling plastering 05 mm thick as in cement mortar 1:3 complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor, skirting etc. complete all as specified and as directed. directed by Engr-in-charge.
M&L for pre-polished coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed
S&F for anodized aluminium frame for window with one or more rebated anodized aluminium window sliding type shutters sliding on two way aluminium channel without sash bars sliding on separetetrack made out of aluminium section weighing 0.55 kg/Rm and necessary joining cleats, glazing clips rubber packings anodized aluminium snap beading screws fittings such as suitable anozized aluminium locking type handle etc and of 4mm thick sheet glass tinted complete all as specified and as directed.
S&F for anodized aluminium frame for door of size (65 x 38) mm with anodized aluminium push/pull glazed type shutter with lock rail top rail and stiles of size (84 x 44) mm and size (115 x 44)mm for bottom rails and necessary joining cleats glazing clips packings anodized aluminium snap beading screws anodized aluminium handles including 5.5 mm thick sheet glass tinted and minimum 4 Nos. 100 mm size aluminium hinges per shutter complete all as specified and as directed.
S&F for aluminum (extruded section) body door closer hydraulically regulated designation No. 3 universal type suitable fo door/ shutter for a door shutter of (85 to 100) mm in width and weight of (61 to 80) kg complete all as specified and as directed.
S&F for mild steel frame works such as grills, gratings etc with ends of bars shouldered and /or riveted or forged in to spikes, framed guard bars, framed balusters, railing and similar works conforming to Fe- 290 Gde- E- 165 complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) in foundations, filing and mass complete all as specified and as directed.
M&L for pre-cast cement concrete 1:3:6, Type C-1 (using 20mm graded atone aggregate) as in block masonry with solid blocks, exe 10 cm in width and setting in mortar, complete inci set in cement mortar 1:4 complete all as specified and as directed.
Labour only for drilling holes for bolts etc, n. exc 25mm dia as in stone (granite/trap)/RCC surfaces upto 10 cm depth complete
S&F for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
S&F 16mm dia mid steel screw boits (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and nex 10cm long complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of RED/BRICK RED colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F bands, straps, supports or stays for rainwater, ventilating pipes, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats and similar small articles incl necessary welding, bolting, riveting, etc, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F 1mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, dia 150mm complete all as specified and as directed.
S&F 1mm thick mild steel sheet drop ends (for spigot or socket ends) or nozzles for half round eaves gutter complete all as specified and as directed.
S&F 1mm thick mild steel sheet Stop ends (for spigot or socket ends) for half round eaves gutter complete all as specified and as directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Demolition of brickwork/stone masonry built in cement mortar or cement lime mortar and removal of rubbish off the site all as specified and directed..
Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engr-in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for
Running welding in repairs to structural members,thickness of metal to be welded exc. 6 mm but n.exc. 9 mm complete all as specified and directed by the Engr-in-Charge.
Welding in repairs to structural members, exc. 2.5 cm. but n. exc 5 cm. in length, thickness of metal to be welded n.exc 6 mm complete all as specified and directed by the Engr-in-Charge.
S&F structural steel work with rolled mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality 'A' all as specified and as directed..
S&F structural steel work with rolled mild steel as in MS plates (Plain/Chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality 'A' all as specified and as directed.
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer and including removing old paint by paint removal or brushing complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F 110mm dia PVC (SWR) bends complete all as specified and as directed.
M&L for providing cement concrete, type B-0, 1:2:4 (using 12.5mm aggregate) in parapets and copings and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L for complete removal of existing treatment & levelling of wall surface using MECHANICAL / ELECTRICAL OPERATED SANDING / SCRAPING MACHINE WITH INBUILT VACCUM SUCTION system to suck the existing treatment as retrieved by scrapping/sanding etc and applying one coat of water proofing wall care putty for obtaining smooth paintable surface complete all as specified and directed.
M&L for applying two coats of 100% Premium acrylic emulsion paint (using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER including preparation / levelling of old surface of wall (prepared under under Item No 90) using manual sand papers (where reqd) of approved grade complete all as specified and as directed.
M&L for two coats of Oil Bound Distemper(OBD) over prepared surface of wall using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls aand applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and as directed.
M&L for cleaning vertical and horizontal surfaces of unplastered masonry wall and concrete surfaces for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete and complete all as specified and as directed.
M & L for point wiring (concealled) complete with FRLSH PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in including non metallic medium grade rigid PVC conduit accessories, ISI marked, 19/20 mm dia including all accessories on the surface of walls/floors/ceilings and making good the disturbed surface, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3 mm thick and 1.5 Sq mm copper earth continuity wire connected to earth dolly complete for one light point controlled by one switch.complete all as specified and as directed.
All as per Srl Item No. 70 here-in-before but one 3 pin socket outlet 5 Amps on the same board.
All as per Srl Item No. 70 here-in-before but one 3 pin socket out let 5 Amps on the independent board.
All as per Srl Item No. 70 here-in-before but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on independent board all as specified and as directed.
S&F LED light fittings 1x20 watts, 220 Volts, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings.
S&F stepped type (0-4 step) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, testing complete all as specified and as directed.
S&F Socket outlet, flush type 2 in 1, 5 pin, 5 amps, 240 volts all as specified and as directed.
S&F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts all as specified and as directed.
S&F switch piano flush button single pole one way 15 amp 240 volts, all as specified and as directed.
M&L for ceiling rose, surface bakelite (65 x 50) mm, three terminals all as specified and as directed.
S&F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 4 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.
S&F MCB SPN 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed.
S&F MCB SP 6 to 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including GI wire of size 4 mm and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size (45X 45X 45) CM, RCC cover (1:2:4) type B1 of size (45X45X6) CM, and excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete including testing on completion all as specified and directed. (GI wire 4 mm dia upto 7.5m including testing consider in this item).
M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 16 sqmm, 4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers etc and testing complete all as specified and directed. Note :- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately under respective items of schedule.
M&L for brick sub class 'B' 250mm x 115mm x 75mm and laid in trenches as in protection of UG cable complete all as specified and directed.
Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.
M&L for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed .
Boring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 100 mm dia for passing of UG cable all as specified and as directed.(GI Pipe laid shall be measured seperately)
M/S CHOWDHURY CONSTRUCTION
M/S. M. S. CONSTRUCTION
G D S ENTERPRISE
M/s S K SHARMA
SHIVAM ENTERPRISE
S Majumder and Construction
NANDA CONSTRUCTION
Shree Mahabir Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .