REPAIR TO FLOORING, PLASTERING, TILING, PLUMBING, SANITARY FITTINGS, ROOF SHEET, JOINERY, CEILING AND PERIODICAL ETC TO CERTAIN OTM ACCN OF UNITS IN THE AREA OF AGE B/R -I UNDER GE CLEMENT TOWN

Amount

Dismantling AC (corrugated or semi corrugated) sheets/ galvalume sheet in roof covering including ridge of any description complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 6mm thick asbestos cement corrugated or semi-corrugated sheets in roof covering, wall cladding etc, fixed with "J" or "L" type hooks or cranked hook bolts complete all as specified and directed.

Refixing of old AC sheets (obtained from taking down) corrugated or semi corrugated sheet in roof covering, wall cladding etc fixed with J or L type hooks or cranked hook bolts complete all as specified and as directed. NOTE:- The reuse of sheets shall be done as directed by EIC.

S&F 6mm thick AC two piece adjustable plain wing ridges for corrugated sheets, fixed with "J" or "L" type hooks or cranked hook bolts complete all as specified and directed.

S&F 0.63 mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutters. drip and straight flashings (length and girth as fixed) with zinc coating(Grade 275) and fixed with "J" or "L" type hooks or cranked hook bolts, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards including cover fillets of any description complete all as specified and as directed.

S&F in true horizontal level false ceiling system using hot dipped galvanized steel section, rotary stitched main tee size 38 mm x 24 mm, cross T 29mmx24mm and wall angle 24mmx24mm. The ceiling grid size shall be of size 600 mm x 600mm duly suspended with 4mm dia GI wire and fixed in ceiling and wall as per manufacturer’s instruction to maintain truly horizontal surface of false ceiling. The main runner to be secured to structural soffit by hanger @1200mm maximum c/c. Cross Tee to be interlocked between main runner @ 600mm to form grid of size 600mmx600mm. The pre-painted designer E-board of 4mm thick, of size 595mm x 595mm, shall be accommodating in frame as per manufacturer’s instructions, complete all as specified and directed.

S & F 6mm thick PVC heavy grade hollow profile designer panel of approved quality and design in wall panelling for including all beadings, matching pvc angles at wall / window corrners complete all as specified.

S & F 6mm thick PVC hollow profile designer panel of approved quality and design for false ceiling fixed over and including rectangular aluminum section 40mm x25mmx0.5mm thick frame work, hanging arrangement etc complete all as specified.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L half brick thick brick work with sub class "B" old size bricks in cement mortar (1:4), straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs and the like complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in framed work complete all as specified and directed.

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 grade E-165 complete all as specified and as directed.

S&F IInd class hard wood as in scantling, clean sawn timber framed and fixed complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.

S&F PVC bend any radius 110mm bore with access door complete all as specified and directed.

S&F PVC bend any radius 75mm bore with access door complete all as specified and directed.

S & F 125/110 mm PVC (SWR) P Traps long arm, complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hard standing , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality) , Orient

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality) , Orient

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.18 Sqm, over and including 10mm thick cement plaster in Cement mortar (1:4) on vertical surface for skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality), Orient

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality) , Orient

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 10mm thick screed bed in Cement mortar (1:4) on vertical surface for skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality), Orient

M&L glazed ceramic coloured tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by GE. Make : Kajaria (premier quality) , Orient

M&L glazed ceramic coloured tiles 600x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by GE. Make : Kajaria (premier quality) , Orient

M&L Vitrified tiles 10mm thick (Square/Rectangular) polished, area of each tiles upto and including 0.36 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. directed by GE. Make : kajaria (premier quality) , Orient

M&L Vitrified tiles 10mm thick (Square/Rectangular) polished, area of each tiles upto and including 0.36 Sqm, over and including 10mm thick cement plaster in Cement mortar (1:4) in skirting/dado in vertical surface, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. Make : kajaria (premier quality) , Orient

M&L Vitrified tiles 9- 10mm thick (Square/Rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. directed by GE. Make : kajaria (premier quality) , Orient

M&L Vitrified tiles 9-10mm thick (Square/Rectangular) polished, area of each tiles upto and including 0.42 Sqm, over and including 10mm thick cement plaster in Cement mortar (1:4) in skirting/dado in vertical surface, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. Make : kajaria (premier quality) , Orient

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from site complete all as specified and directed.

S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F, 30mm thick factory made Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F Solid PVC door frame (wood grain) of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed. Make : Rajshree / Sintex

S&F factory made solid panel PVC door shutter (wood grain) 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of plain colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed. Make : Rajshree / Sintex

S&F 200 mm long stainless steel tower bolts of extruded section, complete all as specified and as directed.

S&F Stainless steel butt hinges 100 mm long, complete all as specified and as directed.

M&L Stainless steel sliding door bolts, 300 mm long with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, flour on bolt plate and two on staple plate and fixed, complete all as specified and as directed.

S&F 150 mm long Stainless steel door handles, complete all as specified and as directed.

S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC and making good disturbed area complete all as specified and directed. Make : Commander /Slim line

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including vitreous china pedestal, CP waste coupling and PVC waste pipe complete all as specified and directed. Make :Jaquar/Hindware / Cera

S&F in repair vitreous china wash down water closet pan pedestal pattern white of size 350mmx475mmx390 mm, including S trap including PVC matching seat cover complete all as specified and directed. Make : Jaquar cat No. CNS-WHT-551SNPP or equivalent in Hind ware / Cera.

S & F in repair vitreous china table top WHB,, size 640 x 400 x 120mm excluding taps, waste, chain and plug and procelin stopper complete all as specified and directed (Make : Jaquar/Parryware/ Cera)

S & F in repair vitreous china wash down water closet pan single piece (pedestal pattern) size 365 x 655 x 760mm UF soft close seat cover fixing accessaries set and accessaries set cistern fittings and S trap 220mm complete all as specified and directed (Make Jaquar cat No. LYS-WHT-38853S or equivalent in Parryware, Hindware.

S and F in repair 15mm dia brass CP wall mixer provision for over head shower with 115mm long bend pipe and wall flange for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Hindware /Jaquar

S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PUW with 450mm stainless steel flexible hose screwed down high pressure screwed for iron pipe completed all as specified and directed. Make:- Hindware /Jaquar

M&L jet black granite slab 15 to 20mm thick of any type work table rubbed and polished in kitchen platforms and like, laid over and including cement screed bed 15mm thick in CM (1:6) bedded and jointed with grey cement slurry and pointed with white cement mortar (1:2) using marble dust with admixture to match with shade of granite complete all as specified and directed.

S&F in repair CP health foucet with 1.00m flexible tube and wall hook complete all as specified and directed. Make:- Jaquar or equivalent in Marc

S&F in repair, CP angular stop cock 15mm dia single way and fixed complete all as specified and directed. . Make:- Jaquar or equivalent in Marc

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed. . Make:- Jaquar or equivalent in Marc

S&F in repair CP overhead shower 100mm round shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed. Make:- Jaquar or equivalent in Marc

S&F in repair 150mm square stainless steel grating with hole for waste pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed.

S&F in repair for CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed.

S&F in repair for sheet glass assembly fancy type 600mm long and fixed with brass screw complete all as specified and directed.

S&F in repair for corner shelf 5 to 6mm thick glass with brackets and fixed with brass screw complete all as specified and directed.

S&F in repair SS towel Rail 600mm long "D" type complete all as specified and directed . Make:- Jaquar or equivalent in Marc

S&F in repair for CP towel ring of standard quality complete all as specified and directed. . Make:- Jaquar or equivalent in Marc

Taking down existing tar felt and plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises and M&L 10-20mm thick cement plaster (1:4) for levelling and finishing existing surface and over laying water proofing treatment on top surfaces of roof after cleaning of roof surfaces with water and filling cracks with sealing compound and dried top surface of roof. Apply a coat of cold bituminous primer @ 0.30 liter per Sqm and followed by a layer of APP polymer modified five layered water proofing membrane 3mm thick weight not less than 3.60 Kg/Sqm with non woven polyester reinforcement (M/s STP Texsa Ltd or M/s IWL (I) Ltd or M/s STP Ltd.The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm and a layer of bituminous aluminum paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane, Application including overlap, side lap shall be provided as per manufacturer instructions and as specified and directed. The side lap and end laps should have overlap of 75mm to 100mm and should be thermo fused together so that it forms a single sheet through out complete all as specified and directed by GE.

M&L precast cement concrete, louvers and jallies, 35mm thick (measured solid) fancy type 1:2:4 type B-0 (Using 12.50mm graded stone aggregate) set in CM (1:4) including, all moulding but excluding frame complete all as specified and as directed.

S&F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including rings, knobs and brackets complete all as specified and directed.

S&F in repair single bowl sinks without drain board made of stainless steel 1mm thick kitchen with plugs, washers, including bedding in cement mortar or fixing cantilever bracket and connecting union to pipe, overall size 430mmX510mmx203mm bowl size 430mmX380mmX203mm complete all as specified and directed. Make:- Prayag or equivalent

S&F in repair single bowl sinks with drain board made of stainless steel 1mm thick kitchen with plugs, washers, including bedding in cement mortar or fixing cantilever bracket and connecting union to pipe, overall size 940mmX460mmX203mm bowl size 405mmX354mmX203mm complete all as specified and directed. Make:- Blue star/ Nirali

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

All as per item 88 above but two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed.

M&L for three coats of white wash to newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of wall putty to newly plastered surface including preparation of surfaces complete all as specified and directed.

M&L Complete removal of existing treatment to wall and applying one coat of wall putty 1mm thick (internal or external ) on walls internal or external surfaces complete all as specified and directed.

M&L two coat of oil bound distemper in existing wall putty surfaces including preparation of surfaces complete all as specified and directed.

M&L two coat of Plastic emulsion paint in existingl wall putty surfaces including preparation of surfaces complete all as specified and directed.

M&L Preparation of old surfaces of walls and applying two coat of weather proof exterior emulsion paint (APEX of Asian) complete all as specified and directed.

M&L Preparation of old surfaces of walls and applying one coat of weather proof exterior emulsion(APEX) paint complete all as specified and directed.

M&L Preparation of old surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered/ treated surfaces and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered/ treated surfaces and applying one coats of oil bound distemper on ceiling surfaces complete all as specified and directed.

M&L Preparation old treated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L Preparation old treated surfaces of walls and applying one coat of Colour wash complete all as specified and directed.

M&L Preparation old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wood and wood based materials, wooden, plastered, concrete surfaces of any descriptions not otherwise described over 10Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and Iron surfaces of any description over 10 cm Width /Girth and applying one coats of synthetic enamel paint of any tint all as directed

M&L one coat of French polish on old wooden surface of any description width or girth incl. cleaning & preparing of the surface complete all as specified and as directed..

Alankar Traders

Nanda Brothers

nautiyalandcompany

P K ASSOCIATES

KISHORE CHAND DINESH CHAND