Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹36.4 L+₹3.8 L (11.5%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹39.9 L+₹7.3 L (22.5%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Not being lowest |
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
25 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ambala
Headquarter Commander Works Engineer Ambala Mansfield Road Ambala Cantt
REPAIR/ MAINT OF CERTAIN WATER NETWORK AND MISC WORK IN SECTOR B AND OTHER AREA UNDER GE (UTILITY) AMBALA CANTT
2023_MES_629249_1
CWE/AMB/UTILITY-47 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Ambala Cantt
All as per tender documents
9 documents required · 9 mandatory
₹1,000
GE UTILITY AMBALA CANTT
₹1.1 L
Yes
12 Feb 2024
21 Nov 2023
27 Dec 2023
21 Nov 2023
25 Dec 2023
13 Dec 2023
22 Nov 2023 - 8 Dec 2023
Amount
Excavation in trenches not exc 1.50 metre wide not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed.
Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed.
Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- Punned thickness 18cm shall be measured for payment purposes.
M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .
Supplying,laying and testing of centrifugally cast (Spun) Ductile Iron Pressure Pipes 200mm bore with Spigot & Socket end, Class K-9 conforming to IS: 8329/2000 and suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining as per IS: 455:1989 and external Metallic Zinc Coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329 including taking up old unservicable pipe as existing at site complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.
All as per Item Sl No.06 here in before but of size 150 mm bore
All as per Item Sl No.06 here in before but of size 100 mm bore
Supplying,laying and testing in replacement of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with flanged end, Class K-9 conforming to IS: 8329/2000 and suitable for rubber gasket jointing incl nuts bolts with centrifugally applied inside cement mortar lining as per IS: 455:1989 and external Metallic Zinc Coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329 for 150 mm bore size including taking up old unservicable pipe as existing at site complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.
All as per Item Sl No.9 here in before but of size 100 mm bore
Supplying,fixing and testing of cast iron sluice valve 150 mm dia, flanged ends, stem (spindle) of SS (forged) and check nut of gun Metal, PN rating 1.6, working parts conforming to IS :14846, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve complete all as specified and directed.
Description all as per item 11 here in before but 100 mm bore.
Description all as per item 11 here in before but 80 mm bore.
Supply and fixing ductile iron fittings for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type ( straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 300 mm bore complete all as directed by Engineer-in-Charge
Taking out column pipe flanged 100 mm bore with 2 nos submersible cable from bore hole of tube well with the help of chain pulley block or tripod located in different location by dismantling nut bolts and rubber gaskets and lowering down the same by refixing nuts, bolts and new rubber gaskets complete all as specified and directed.
Taking out pump set from borewell and transportation of pumpset for repairing motor pump set to workshop, taking out burnt winding wire from submersible motor of capacity 50 HP 3 phase ,rewinding with suitable size of PVC coated copper winding wire including replacement of burnts bushes complete including all insulation material and transportation back to site and refixing the same, testing and commissiong complete all as specified and directed by Engineer in charge : Note: (i) Any fault such as short circuit, earth fault, burning of submersible cable due to unbalance load or any other reason occur in the motor after repair during the currency of contract will be bear by the contractor and rates are deemed to be included in the item for rectification of the fault. (ii) Spares for replacement will be measured and paid separately under respective items.
All as per srl item No. 16.00 above but of capacity 40 HP
Material & labour in replacement of bearing bush for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of rotor sleeve for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of thrust bearing for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of thrust plate for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of motor coupling with key for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of water drain plug for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material & labour in replacement of upper bearing housing assembly for submersible motor of capacity 40 hp to 50 hp complete all as specified and directed.
Material and labour strip opening of submersible pump set complete of capacity 50HP/40HP and replacing defective parts, removing iron scales cleaning the serviceable parts and re-assembling in existing state after carrying out necessary repair / replacement of worn out defective parts and making serviceable and testing on full load complete all as specified and directed. Note :Spares for replacement will be measured and paid separately under respective items.
Supplying, laying, jointing and testing in replacement of existing size with pre-insulated multi standard copper conductor flat of size 25 sqmm, 3 core submersible cable and connected with suitable and required thimbles and nut bolts to panels complete all as specified and directed.
All as per srl item No. 26.00 above but 16 Sqmm.
Supply, lowering, jointing, against replacement of unserviceable GI pipe heavy duty 100mm internal dia 3 mtr long with both ends threaded and fitted with heavy duty MS flanges 14mm thick, two Nos groves for submersible cable continuous welded and drilled 4 Nos hole, complete as column pipe including jointing material such as bolts, nuts, washers and rubber gasket etc complete all as dpecified and specified.
Material and labour for taking out centrifugal Inductioin motor pumpset of capacity 50HP, repair and replacement of necessay spare parts of 50 HP 3 phase 415 volt ,transportation of same from site to workshop and back dismantling existing winding and rewinding of motor with insulated copper wire of existing gauge varnished, reassembling and refixing complete all as specified and directed. Note:- Parts to be replaced shall be decided by Engr-in-charge and shall be measured ans paid separately.
All as per Serial Iterm No 29 here-in-before but for motor set 40/30 HP complete all as specified and directed.
Material and labour in replacement of Pump shaft for Centrifugal induction motor of capacity 40HP to 50HP complete all as specified and as directed.
All as per item No. 31 here-in before but Wear Ring as per existing
All as per item No. 31 here-in before but Shaft Sleeve as per existing
All as per item No. 31 here-in before but Gland packing as per existing
All as per item No. 31 here-in before but bearing as per existing
All as per item No. 31 here-in before but Impeller Key as per existing
Supplying. laying & testing of GI pipe 25mm bore medium grade ISI marked with all fittings, fixed on wall or laid under floors including taking down of old pipe and making good the disturbed locations as per existing complete all as specified and directed.
All as per srl item No 37. here in before but of 20 mm bore.
Supplying. laying & testing of GI pipe 80mm bore medium grade ISI marked with all fittings, laid in trenches including taking down of old pipe and making good the disturbed locations as per existing complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.
All as per srl item No.39 here in before but of 50 mm bore.
All as per srl item No.39 here in before but of 40 mm bore.
All as per srl item No.39 here in before but of 25 mm bore.
All as per srl item No.39 here in before but of 20 mm bore.
Supply and fixing in replacement of gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50mm bore including fixing nipple, union or fitting as per site requirement complete all as specified and directed.
Description all as per item 44 here in before but 40mm bore
Description all as per item 44 here in before but 25mm bore
Description all as per item 44 here in before but 20mm bore
S&F in replacement of PVC float valve 20mm dia high pressure with polythene float and fly nut and with one GI socket 20mm and connected items complete all as apecified and directed.
M&L brick masonary valve pit of size 900 x 900 x 900mm dimensions, one brick thick valve pit of following internal dimension with two nos. of RCC slab cover of suitable size with handle to lift atleast thick having provision of valve key slot, earth work and PCC foundatin (1:3:6) Type C2 using 40mm graded stone aggregete 150 mm thick, PCC in coping on top (1:2:4),Type B1 using 20mm graded stone agregate 100mm thick including rendering 15mm thick and two coat of white wash on exposed surfaces on external wall above ground level incl demolition of old unserviceable existing one complete all as specified and directed. Note: The valve pit shall be constructed as per HQ CE CHZ drawing No. TD-1258. The said drawing may be referred from GE office during working hours.
Description all as per item 49 here inbefore but 1200 x 1200 x 1200 mm.
Description all as per item 49 here inbefore but 450 x 450 x 450 mm.
Cutting/removing of bushes/small trees/vegetation growth upto a distance of appx 50 mtr around the UG sump,OHT,Pump house/Booster not exc 30cms deep incl drains all around the plant incl rough surface leveling/cutting,filling upto 12" height/ depth all around the plant and burning at a distance of 50mtr (minimum) in the presence of Engr-in-charge including sprinkling the round up chemicals for drying/killing the bushes,shrubs etc complete all as specified and as directed.
Maintenance and repair to water supply lines to remove leakage/blockage for GI pipe line of 15mm to 50mm dia including dewatering and necessary excavation returning/filling or cutting, chasing and making of disturbed surfaces as per existing specification and S&F worn out GI pipe max upto 2 mtrs long including cutting threading and with S&F of requisite fittings as socket, union, tees, long screwes nipple, hexa nipple, reducer etc complete all as specified and directed.
Maintenance and repair to leakage/blockage of water supply CI/DI/GI pipe line/MS pipe of 80 mm to 300 dia size including necessary excavation required for taking out burning out lead joint or damaged rubber ring/hole from position and making the disturbed surfaces as per existing specification after replacing new spun yarn and lead joint or Tyton joint/D-joint or necessary fitting required as per site and making the pipe line leak proof complete to the entire satisfaction of Engineer-in-Charge, complete all as specified and directed. Note Rectification of leakage on OHTs vertical pipes and under ground pipes are also included in this item.
Supplying, fixing & testing in replacement of cast iron non return valve 150mm dia PN 1.6, connected with two end flanged suitable for connecting pipe, nut-bolts etc including taking down old unserviceable valve complete flanges nut-bults etc all as specified and directed.
Description all as per srl item No 55.00 here in before but of size 100 mm dia.
Supply and fixing in replacement cast iron foot valve of size 100 mm with flanged ends with nut-bolts and rubber gasket suitable for pipe including taking out the unserviceable foot valve from the pipe complete all as specified and directed.
Material and labour in replacement of DOL starter suitable for 5/7.5 HP capacity electric motor complete all as specified and directed.
S & F in replacement on load change over of 400 Amp, 415 V 3Phase and neutral with enclosure complete all as specified and directed.
S & F in replacement on load change over of 160 Amp, 415 V 3Phase and neutral with enclosure complete all as specified and directed.
Supply and fixing in replacement MCCB TPN,36 KA breaking capacity, 400Amp adjustable thermal and adjustable magnetic setting including suitable thimble nut bolt and washers complete all as specified and directed.
Taking up/down steel tubing/PVC/PPR pipe of size 25 mm for connection of chaloronome plant to UG sump/header/delivery pipe for supply chalorine to potable water complete all as speciifed and directed.
Taking up/down steel tubing/PVC/PPR pipe of size 20 mm for connection of chaloronome plant to UG sump/header/delivery pipe for supply chalorine to potable water complete all as speciifed and directed.
Preparation of old surfaces of CI/DI/GI pipe 100 to 20 mm bore by removing old paint and applying two coats of synthetic enamel paint on all external surfaces of CI/DI pipe for rising supply, overflow and washout 100mm bore vertical length including necessary scaffolding and other arrangement required for painting complete all as specified and directed.
M&L in replacement of mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut of any length and any dia for column pipes and pumpsets complete all as specified and directed.
M&L attending any type pump/motor/LT panels/DGs/Starters complaint at pump houses and boosters and rectify the same, rates are also included for replcement of thimbles any type and any size with nut-bolts and cable jointing with insulating tape, gland packing, greasing in pumps/valves with all connected items all as specified by the Engr-in-Charge. Note: Complaint should be rectify within 06 Hrs otherwise a penalty of Rs 250 per day shall be imposed.
Demolition of brick work built in cement mortar incl all quoins, arches, pillars, in any situation etc including stacking of bricks removal of debries to distance n exc 250 mtr complete all as specified and as directed.
Taking down cement plaster from brick wall including raking out joints ,hacking for key scrubbing down with water complete all as specified and directed.
Material and labour brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with water proofing compound @ 2% by weight of cement, trowelled to even and fair without using extra cement, complete all as specified and directed. NOTE: Water proofing compound shall be measured and paid separately.
Material and labour for rough cast plastering over and including 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state, the rough cast mixture consisting of crushed stone or fine gravel aggregate (of size between 6 to 12 mm ) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered complete all as specified and directed. Note :- Rough cast plaster shall be applied all as specified in clause 14.22 of SSR Part-I 2009 .
Material and labour for preparation of newly plastered of wall surfaces and applying two coats of cement base paint complete all as specified and directed.
Supply only integral water proofing compound all as specified..
Demolition of Cement Concrete(unreinforced) in ground floors of any description and in any position not otherwise (below or above ground level) or under the over head tank/road cutting etc complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed.
M & L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in path,paving etc finished even and smooth using extra cement complete all as specified and directed.
Material and labour for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, bed block , copings and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork complete all as specified and directed.
M & L for factory made, machine pressed pre-cast concrete, Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & with pigment set and jointed in cement mortar 1:4 over and including 15mm thick screed bed in CM 1:4 over and including 75mm thick PCC 1:3:6 C1 type using 20mm graded stone aggregate complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded mechanically crushed stone aggregates, in foundation filling and mass concrete complete all as specified and directed.
Dismantling RCC posts or struts (wood steel or RCC) any section embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed. Note : Dismantling of existing galvanized iron steel barbed wire / Chain link fencing shall be measured & paid for separately.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m in any type of soil, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
M&L for Plain cement concrete 1:2:4 type B0 (12.5 mm graded mechanically crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified & directed.
S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete all as specified & directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
Supply only galvanised mild steel wire chain link fencing of mesh size as directed including taking down of old fencing, complete all as specified and directed. Note:- Weight of chain link fencing shall be ascertained through BOO and same shall be convened by GE during execution of work.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. with and including MS binding wire complete all as specified and directed.
Material and labour in replacement for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 10mm dia round bars confirming to Fe 500/550 D as in stiffeners to chain link fencing complete all as specified and as directed.
Material and labour for MS flat iron,round or square bars conforming to Grade E-165 (Fe- 290) for fixing chain link fencing, complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long and dia of neck 5 to 10 mm, complete all as specified & directed.
Material and labour galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc including taking down of old fencing complete all as specified and directed.(Each line to be measured separately).
Supply and fixing fully automatic star delta starter ML - 4 in sheet steel enclosure type MN with single phase protection feature (motor rating AC-3 duty, 415 V, 50 Hz, 3 Ph) cap 60 to 75 HP, 55 KW relay range 45-75, complete all as specified and directed. Make : LT cat Pat No SS94022 or equivalent of makes as specified.
Supply and fixing in replacement air breathing appartus for chlorination, use time 30 minute, HSM code 9020 complete all as specified and directed.
Supplying and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with aluminium conductor, 1100 Volts grade, cross sectional area 120 Sqmm 3.5 core, suitable for 1.1 KV earthed system, in trenches, floors, ducts passing through pipe for road crossing etc, including connecting and testing,complete all as specified and directed.Note : Excavation, earth work, cable cover protection, sand cushioning and GI pipe etc shall be measured & paid for separately.
All as per ser item No 94 above but of cross sectional area 95 sqmm 3.50 core
All as per ser item No 94 above but of cross sectional area 70 sqmm 3.50 core
Supply and fixing in replacement of LED Aviation light input voltage 48/24 V DC / 230V AC, IP 65 with poly carbonate glass for 360 degree illumination with necessary PCC 1:2:4 block as per site requirement, GI Pipe 25mm bore light grade for bracket complete all as specified and directed.
M & L for cleaning to over head tank capacity 50000/75000 gallons of 50/60 mtr height with following steps and as directed by Engr in Charge:- (i) Draining out the water from tank (ii) Taking out the mud/sludge and deposits as directed by Engr-in-Charge.. (iii) Cleaning and scraping out the inside surfaces with brush completely. (iv) Washing by the bleaching power and dewatering the same. (v) Lime washing to inner surfaces of the tanks. (vi) Rewriting the tank cleaned date and due date by white paint on black painted surface all as directed by the Engr-in-charge.
All as per ser item No 98 above but of 100000 gallons.
All as per ser item No 98 above but of 200000 gallons.
M & L for cleaning to under Ground Sump capacity 1.5 lakh of with following steps and as directed by Engr in Charge:- (i) Draining out the water from tank. (ii) Taking out the mud/sludge and deposits as directed by Engr-in-Charge. (iii) Cleaning and scraping out the inside surfaces with brush completely. (iv) Washing by the bleaching power and dewatering the same. (v) Lime washing to inner surfaces of the tanks. (vi) Rewriting the tank cleaned date and due date by white paint on black painted surface all as directed by the Engr-in-charge.
Note:- Amount of credit of Rs. 262340.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 of tender documents in pdf form which will be deducted offline while acceptance of tender.
KULWANT SINGH
Gupta Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .