Repair/ Renovation of Executive Engineers residential quarter at Samba under M and R

Amount

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)

Removing dry or oil bound distemper , water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scraches etc. complete.

12mm thick Cement plaster of mix 1:6 ( 1 cement : 6 coarse sand)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the surface of the wall complete including disposal of rubbish to the dumping ground within 50 mtr lead with cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and applying white cement based putty of specified thickness of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with acrylic emulsion paint of approved brand and manufacture to given an even shade two or more coated on new work

Providing and fixing PVC wall panelling of superiour quality incl. all frames and required necessary fittings and fixtures incl. carriages from source to site of work (LMR)

Dismantling doors, windows and clerestroy windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area of 3 sqm below

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacturer) of approved make , in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in complete

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm incl. painting and fitting and brackets, cutting and making good the walls wherever required (610 x 510 mm bowl depth 200 mm)

Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighting not less than 810 grams

Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser point of appproved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P brass of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make weighting not less than 1.970 Kg

Providing and fitting wash basi with C. I. brackets , 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Viterous China wash basin size 630 x 450 mm with a single 15 mm C.P brass pillar taps

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lid, 10 litre low level white PVC flushing cistren, including flush pipe with manually controlled device (handle lever) conorming to IS: 7231 with all fitings and fixtures complete including cutting and making good the walls and floors wherever required: W.C. panwith ISI marked and white solid plastic seat and lid.

Providing and fixing wire guaze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.36 mm for doors , windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in - charge second class Kail wood ( 35 mm thick shutters)

Providing / fixing of aluminium doors, windows in rames and shutters including required glazing and required fittings all complete

Engaging labour for general cleaning of the premises by ways of cleaning the door , windows and vegetation and removal of mulba from the premises , cleaning of chocked drains etc.

Applying priming coat with ready mix pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Paiting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade , one or more coats on old work

Renewing glass panes with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm ( weight not less than 10 kg/ sqm)

TAHIR MALIK

Mohd Saleem Contractor