Annual Rate Contract For Electrification work in Different Buildings of Vadodara Municipal Corporation. (Percentage RATE BASIS) (Re-Invite)

Name of work : Annual Rate Contract for Electrification work in

Different Buildings of Vadodara Municipal Corporation.(%Rate Basis)

(All Item Rate is without GST) (Re-Invite)

Sr Quantity Rate (in

Item description Per Amount

1 1 Providing & Erecting 1.0mtr long G.I 837 each ₹

pipe bracket for LED/Tube light Fitting.

as per specifications

2 1 Providing & Erecting Chemical Earthing 8910 each ₹

with 3mtr. Long earth electrode for the

switching box as per the technical

specification given in the tender

3 1 Providing & Erecting Chemical Earthing 4196 each ₹

with 1.25mtr. Long earth electrode for

Electric OR Streetlight Pole/Switching

Box OR LED fittings as per the technical

specification given in the tender

4 1 Point wiring for Light / Fan/ Bell/ Primary 351 each ₹

Point with 2-1.5 sq. mm & earth wire of

1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto

max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI

marked flush type switch / bell push and

accessories erected on Metal /

PVC/Wooden Box covered with 3 mm

thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete

5 1 Point wiring for Light / Fan/ Bell/ Primary 297 pt ₹

Point with 2-1.5 sq. mm & earth wire of

1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto

max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI

marked flush type switch / bell push and

accessories erected on Metal /

PVC/Wooden Box covered with 3 mm

thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.( c) with oval

conduit /PVC casing capping double

lock type erected flushed on wall/ceiling

6 1 Point wiring for FAN with 2-1.5 sq.mm & 632 pt ₹

earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch

and hum free EME step type electronic

fan regulator mounted and accessories

with earth continuity of following type

erected on PVC / Metallic/Wooden box,

single mounting base frame covered

with textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.(a)

with medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete catt-iii

7 1 Point wiring for independent PLUG with 310 ₹

following size mains earth wire of

sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi

strand copper wires upto 10 mt length,

in following below of pipe erected

complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected

with earth continuity connection erected

on Metal / PVC/Wooden box covered

with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet. [A] For 6 amp

plug and 6 amp switch with 2-1.5 sq.

mm Cu. Mains from near by

switchboard/db board upto 6 mt.(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete

8 1 Point wiring for on board looped PLUG 66 pt ₹

with tissino type single pole ISI marked

Switch and Socket erected with

necessary connections erected on

wooden /Metal/ PVC Box covered with

3 mm thick PC(Polycarbonate) /Acrylic

sheet for open / concealed wiring for

following size.[A] For 6 Amp.

9 1 Point wiring for Light / Bell with 2-1.5 445 Pt ₹

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in

below type of pipe erected with 6A

Modular type switch / bell push &

accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid

PVC pipe and accessories erected

flushed on wall/ceiling complete(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete CATT-III

10 1 Point wiring for secondary light point 131 pt ₹

with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of

pipe to be erected complete with earth

continuity and necessary connection

with primary light with accessories

erected on Metal / PVC / wooden box

covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for

open / concealed wiring. with necessary

Lamp holder / ceiling rose /

H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete

11 1 Point wiring for Individual Plug with & 471 pt ₹

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe

erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules erected

on / in wall / ceiling as per pipe erected

with following type of accessories.[I] For

6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby

switchboard/mcb db board(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete catt-iii

12 1 Point wiring for on board Looped Plug 255 pt ₹

with 6A Modular type switch & 5 pin

socket erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules

erected on / in wall / ceiling with

following type accessories catt-iii

13 1 Providing following type of Modular Type 150 each ₹

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge.(1)One No. SP 6 Amp.

14 1 Providing following type of Modular Type 395 each ₹

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge.(5) Electronic hum Free steps

EME Fan regulator catt-iii

15 1 Providing following type of Modular Type 25 each ₹

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge(7) blank plate catt-3

16 1 Providing following type of Modular Type 179 each ₹

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge(9) 16 Amp. SP one way switch

17 1 Providing following type of Modular Type 198 each ₹

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

charge(10) 6/16Amp. Universal socket

18 1 Providing & erecting following type of 27 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(1) 6 Amp. SP one

19 1 Providing & erecting following type of 51 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(3) 16 Amp. SP one

20 1 Providing & erecting following type of 82 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(2) 6/16Amp.

Universal socket

21 1 Providing & erecting following type of 42 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(4) 6 A socket

22 1 Providing and erecting ISI mark Medium 33 mtr ₹

class RIGID PVC PIPES of following

size complete to be erected on/in wall or

ceiling erected with necessary PVC

fittings & Junction boxes fixed with

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed (b) 25 mm

23 1 Providing and erecting ISI mark 54 mtr ₹

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps

with following dia of pipes, in approved

manner as directed (c)

24 1 Supplying & erecting UPVC Mini 31 mtr ₹

trunking (PVC Casing-n-Capping)

having double-locking arrangement with

grooves, trunking of size not below

mm in height as per IS with accessories

of PVC/Resin polypropylene not below

1.8 mm thick duly sealed in joint &

erected on wall / ceiling of following size

25 1 Supplying & erecting UPVC Mini 36 mtr ₹

trunking (PVC Casing-n-Capping)

having double-locking arrangement with

grooves, trunking of size not below

mm in height as per IS with accessories

of PVC/Resin polypropylene not below

1.8 mm thick duly sealed in joint &

erected on wall / ceiling of following size

26 1 Supplying and laying UPVC cable 275 mtr ₹

trunking system comprising

unplasticised polyvinyl, chloride rigid

material with ignition free and flame

proof confirming BS with necessary end

caps Internal and external bend, flat

bends, coupler, tee etc..All necessary

accessories and measuring of following

sizes(1) 75 mm x 50 mm trunking

27 1 (2) 100 mm x 50 mm trunking 424 mtr ₹

28 1 (3) 50 mm x 50 mm trunking 187 mtr ₹

29 1 Providing and erecting Mains with 1.1 62 mtr ₹

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire

in following type of pipe to be erected

concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green

colour for earth continuity of following

size (A) With medium class Rigid PVC

pipe and accessories(a) 2 wire 1.5 sq.

30 1 (b) 2 wire 2.5 sq. mm 82 mtr ₹

31 1 Providing and erecting Mains with 1.1 56 mtr ₹

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire

in following type of pipe to be erected

concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green

colour for earth continuity of following

size (C) With oval conduit /PVC casing

capping double lock type (a) 2 wire

32 1 ;- Do But (E) (a) 2 Wire 1.5 Sq. m.m. in 46 mtr ₹

33 1 (C) With oval conduit /PVC casing 56 mtr ₹

capping double lock type (a) 2 wire

34 1 (C) With oval conduit /PVC casing 82 mtr ₹

capping double lock type(b) 2 wire

35 1 providing and erecting Mains with 1.1 111 mtr ₹

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire

in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size.(A) with medium class

Rigid PVC pipe and accessories(a)

36 1 (A) with medium class Rigid PVC pipe 179 mtr ₹

and accessories(g) 4 wire 4 sq. mm

37 1 Providing & Erecting following 31 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(1) One no Single pole 6 A

Switch / Bell push

38 1 Providing & Erecting following 31 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(2) One no 3/5 pin 6 A Socket

39 1 Providing & Erecting following 47 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(3) One no Single pole 16 A

40 1 Providing & Erecting following 47 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(4) One no 6/16 A Universal

41 1 Providing & erecting following type of 27 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(1) 6 Amp. SP one

42 1 Providing & erecting following type of 51 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(2) 16 Amp. SP one

43 1 Providing & erecting following type of 82 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(3) 6/16Amp.

Universal socket

44 1 Providing & erecting following type of 42 each ₹

Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(4) 6 A socket

45 1 Providing & erecting Switch board for 329 each ₹

Computer or electric apparatus

consisting of following items in single

board erected on PVC / Metal/Wooden

board concealed/open with 3 mm thick

PC (Polycarbonate) / Acrylic sheet

erected as directed

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ( For Tissino Type

AccessoriesFor Tissino Type

46 1 Providing & erecting Switch board for 1122 each ₹

Computer or electric apparatus

consisting of following modular type

accessories mounted with PVC /

Metallic concealed/open box with single

mounting base frame covered with

textured/metallic /white front

plate,modules erected with necessary

connections as directed1 no. 6A/16A

universal plug-switch combined.3 nos.

6A Switch3 nos. 6A 5 pin Plug ( For

Modular Type Accessories ) CATT-II

47 1 Supplying & erecting Approved make 147 each ₹

call bell indicator with buzzing sound

and Red light indicating lamp with Red

light button to attend the call suitable for

240 v 50 c/s supply to be erected.

48 1 Call bell / Buzzer,250 volts, complete 31 each ₹

49 1 Call bell gong type suitable for 230 volts, 42 each ₹

50 c/s. AC supply complete Erected

50 1 Decorative call bell Ting-tong box type 71 each ₹

250 volts complete erected

51 1 Supplying & erecting Electronic Type 248 each ₹

Cordless Call Bell erected on PVC/Metal

board having portable bell push working

on D.C. & bell on 230V A.C. supply with

cells / battery

52 1 Supplying and erecting approved make 476 each ₹

of tube fitting with One no T-5 tube 24/

28 W with Electronic ballast with each

tube separately THD less than 10 & built

in adaptors, GI / PVC housing & mirror

optic reflector, suitable to work on 120V

- 300V, A.C. supply with connector and

adapter if required. [Make of fitting &

tube may be differ& fitting shall be

providing with tube] CATT-III

53 1 Supplying and erecting LED indoor 293 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser with

company mark/name 160V to 270V,

Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(A) Tube

Light with integral driver(iii) 18-20 Watts,

Surge - 2KV,IP-20, conventional 4 feet

54 1 Supplying and erecting LED indoor 164 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser with

company mark/name 160V to 270V,

Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(A) Tube

Light with integral driver(i) 5-10 Watts,

Surge-2 KV, IP-20, conventional 1 to

55 1 Supplying and erecting LED indoor 1777 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name 160V to

270V,Power Factor more than 0.9, THD

Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(B) LED

Panel Light with provision for Plane front

frame with translucent cover fixed to

housing complete.IP20.(vi) 36 watts,

24" x 24", Surge- 2KV.CATT-III

56 1 Supplying and erecting LED indoor 370 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser with

company mark/name 160V to 270V,

Power Factor more than 0.9, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(A) Tube

Light with integral driver.(iv) 22-24

Watts, Surge - 2KV,IP-20, conventional

57 1 Supplying and erecting led lamps with 69 each ₹

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge

protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5.(A) LED Lamps

integral type, with PC diffuser suitable

LAMP holder . (i) 2 to 3 watts CATT-

58 1 Supplying and erecting led lamps with 111 each ₹

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge

protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5.(ii) 5 to 8 watts

59 1 Supplying and erecting LED indoor 423 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(A) Square/

Circular shaped Surface/Recessed

Mount Downlight with provision for

spring loaded mounting clips

complete.IP20.(ii) 11-15 watts, Surge-2

60 1 Supplying and erecting LED indoor 584 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name 160V to

270V,Power Factor more than 0.9, THD

Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)(A) Square/

Circular shaped Surface/Recessed

Mount Downlight with provision for

spring loaded mounting clips

complete.IP20.(iii) 16-20 watts, Surge-2

61 1 Supplying and erecting LED indoor 751 each ₹

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall

be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.).(A) Square/

Circular shaped Surface/Recessed

Mount Downlight with provision for

spring loaded mounting clips

complete.IP20.(iv) 22-24 watts, Surge-2

62 1 Supplying and erecting LED street light / 3312 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (i) above 36 to

63 1 Supplying and erecting LED street light / 4948 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (ii) above 48 to

64 1 Supplying and erecting LED street light / 5917 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (iii) Above 60 to

65 1 Supplying and erecting LED street light / 6501 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (iv) above 90 to

66 1 Supplying and erecting LED street light / 7798 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (v)above 120 to

67 1 Supplying and erecting LED street light / 9108 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (vi)above 160 to

68 1 (a) LED Bollard fittings of minimum 2058 each ₹

height 400 mm & dia.100mm having

polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium

finished powder coated pipe with base

plate 160x160mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 9 to 20 watt ,surge-

69 1 Supplying and erecting LED street light / 10162 each ₹

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection. (vii)above 200 to

70 1 Providing Approved make Double Pole 323 each ₹

Cast Iron Clad Switch & rewirable Fuse

240 / 250 V confirming to IS.(a)16A.

71 1 Providing Approved make Double Pole 509 each ₹

Cast Iron Clad Switch & rewirable Fuse

240 / 250 V confirming to IS.(b)32 A

72 1 Providing Approved make Triple Pole 1958 each ₹

Metal / Iron Clad Switch & Fuse with

neutral link 415/500 V confirming to

IS.(a)63A catt-iii

73 1 Providing Approved make Triple Pole 3399 each ₹

Metal / Iron Clad Switch & Fuse with

neutral link 415/500 V confirming to IS

(b) 100A CAT-III

74 1 Pproviding and erecting Approved make 6112 each ₹

Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on

A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

75 1 Providing and erecting Approved make 7976 each ₹

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating

125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply

50 c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

76 1 Providing and erecting Approved make 20739 each ₹

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA.

and above at 415 V . having normal

current rating 250A. with variable

thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

16 G.M.S. housing.CS=100% of ICU

77 1 Supply of Approved make Iron Clad or 17738 each ₹

metal clad four pole change over switch

415V. confirming to IS of following

capacity (A) 200 A / 250 A Cat-lll

78 1 Providing and erecting Approved make 24979 each ₹

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA

and above at 415 V having Normal

current rating 400A. with variable

Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. With all

internal connections, spreader tinned

copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU

79 1 Providing and erecting busbar chamber 4378 Rmtr ₹

confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket

and necessary busbar supports with

COPPER busbar having current density

not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly

wrapped with colour insulation tape for

phase sequence, three phase & neutral

each suitable for following current

capacity with necessary painting

mounted on wall or pedestal frame of

required size with necessary

connections.(A) Suitable for 63/100

80 1 Providing and erecting busbar chamber 5675 Rmtr ₹

confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket

and necessary busbar supports with

COPPER busbar having current density

not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly

wrapped with colour insulation tape for

phase sequence, three phase & neutral

each suitable for following current

capacity with necessary painting

mounted on wall or pedestal frame of

required size with necessary

connections.(B) Suitable for 200 Amp.

81 1 Supplying KITKAT pattern porcelain cut- 145 each ₹

out fuse with base of following current

capacity erected on existing block

board.(iv) 63 A 500 V

82 1 Supplying KITKAT pattern porcelain cut- 276 each ₹

out fuse with base of following current

capacity erected on existing block

board. (v) 100 A. 500 V.

83 1 providing and erecting Miniature circuit 268 each ₹

breaker single pole 0.5A to 2A system

and having breaking capacity 10 KA to

be erected in existing box. confirming to

IS 8828/1996 with ISI Mark .catt-iii

84 1 providing and erecting Miniature circuit 111 each ₹

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark catt-iii

85 1 Providing & erecting 240 V MCB double 297 each ₹

pole switch for motor & inductive load

(C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity A)

6 to 32 Amp.catt-iii

86 1 Providing & erecting 240 V MCB double 327 each ₹

pole switch for motor & inductive load

(C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

(B) 40 Amp.cat-iii

87 1 Providing & erecting 415V MCB Four 573 each ₹

Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity(a) 6 to

88 1 Providing & erecting 415V MCB Four 632 each ₹

Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacityb)40 Amp.catt-

89 1 Providing and erecting four pole 590 each ₹

Miniature isolator A.C. 22 duty confirms

to IS 13947-3 in existing box.(b) for

90 1 Sheets steel powder coated enclosure 175 each ₹

suitable for incorporating One/Two nos.

91 1 Providing and erecting Sheet Steel 696 each ₹

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for.(A) single

phase incoming and horizontal single

phase outgoing.single door (IP-30).(iii)8

92 1 Providing and erecting Sheet Steel 877 each ₹

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for.(A) single

phase incoming and horizontal single

phase outgoing(b) sheet steel double

door (IP-43)(ii)6 way

93 1 Providing and erecting Sheet Steel 1478 each ₹

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for.(A) single

phase incoming and horizontal single

phase outgoing.(b) sheet steel double

door (IP-43)iv)12 way

94 1 Providing and erecting Sheet Steel 1893 each ₹

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for.(B) three

phase incoming and single phase

horizontal type outgoing Per phase

isolation type (PPI).(b) sheet steel

SINGAL door(ii)6 way

95 1 Providing and erecting Sheet Steel 2421 each ₹

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of

MCB to be used) suitable for.(B) three

phase incoming and single phase

horizontal type outgoing Per phase

isolation type (PPI).(b) sheet steel singal

96 1 providing and erecting Approved make 2313 each ₹

RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on single phase

240 V,50Hz. having characteristic of

quick action & tripping with all advance

feature & do not incorporate any

electronic component. for following Max.

rating erected as directed.(ii) 40Amps.

97 1 Providing and erecting Sheet Steel 12061 each ₹

powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted

double door (IP54) fitted with insulated

copper busbar, isolated neutral link,

earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986,IP-54 suitable

for 63/100 AMP TPN MCCB + RCCB

as incomer and three phase outgoing

as per following .(The DBs should be

used of same company of MCB to be

used) (B)6 way outgoing

98 1 Providing and erecting Approved make 3010 each ₹

RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic

of quick action & tripping with all

advance feature & do not incorporate

any electronic component for following

Max. rating erected as directed.(iii)

Amps. FP.catt-iii

99 1 Providing and erecting Annealed bare 787 kg ₹

Copper wire 8 to 16 SWG.

100 1 Providing & erecting weather proof, dust 19196 sq.mtr ₹

& vermin proof, floor mounted front

operated indoor type cubical panel

board necessary IP-42 and above

protection as per approval from

engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary

accesories , supporting angles/ flats

channel including cutting, bending,

drilling, welding, riveting with internal

partitions & cable alley as per

requirements & instruction of engineer-

in-charge with erection of .....supplied

switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire /

copper-aluminium strips, rubber

grommets, rib, bakelite control

fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking

arrangement and rubber gasket,heavy

duty end terminal connection,danger

notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy

powder coating.(The rates excludes the

cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium

strips, meters, Fuses etc. The

dimension shall be measured excluding

base beams) The panel shall be

supplied with following approved

manufacturers with following size.(B)

The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory(ii) With 550 mm.

101 1 Providing and erecting Steel cover as 2535 sqmtr ₹

per drawing using 16 SWG M.S.sheet of

following depth, to house the switch

gear etc. complete with locking

arrangement and lock with duplicate

keys per cupboard and door handles

erected with necessary support and

painting. [One coat red oxide and two

coat enamel paint].(B)Without angle iron

frame.(i) For 25 cms. Depth

102 1 Supplying & erecting XLPE(IS:7098) (I)- 71 mtr ₹

88 ISI unarmoured Aluminium cable

KV.grade to be erected as directed of

following size. (C) 2 core 6 Sq. mm

103 1 Supplying & erecting XLPE(IS:7098) (I)- 79 mtr ₹

88 ISI unarmoured Aluminium cable

KV.grade to be erected as directed of

following size. (C)3 core 6 Sq. mm

104 1 Providing and erecting 106 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables. (C) 3 core 6 Sq.

105 1 Providing and erecting 218 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables .(B) 3 1/2 core

35 Sq. mm ( 16 Sq. mm 1/2 core)

106 1 Providing and erecting 282 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables .(C) 3 1/2 core

50 Sq. mm ( 25 Sq.1/2 mm core)

107 1 Providing and erecting 535 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe of

following size of cables .(F) 3 1/2 core

120 Sq. mm ( 70 Sq. mm 1/2 core)

108 1 Providing and erecting 285 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe at

road crossing or floor of following size

of cable.(B) 3 core 4 Sq. mm

109 1 Providing and erecting 1336 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe at

road crossing or floor of following size

of cables.(A) 3 1/2 core 25 Sq. mm (

Sq. mm 1/2 core)

110 1 Providing and erecting 1849 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe at

road crossing or floor of following size

of cables.(B) 3 1/2 core 35 Sq. mm (

Sq. mm 1/2 core)

111 1 Providing and erecting 1490 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for

KV. to be laid on wall with necessary

clamps or in existing trench / pipe at

road crossing or floor of following size

of cables.(C) 4 core 25 Sq. mm

112 1 Providing & laying approved make 62 mtr ₹

Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS

II )with necessary connecting

accessories of same material at required

depth in existing trench for laying of

cable. below ground / road surface for

enclosing cable.(A)50 mm outer dia

113 1 Providing and erecting Approved make 1581 each ₹

Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with

earthing. [Make shall be approved by

Engineer in charge]

114 1 Supplying and erecting 19 / 20 mm. 107 each ₹

nominal bore Medium Class M.S. Pipe

down rod erected duly painted for fan

complete with proper insulation without

leakage and earthing.

115 1 Supplying & erecting Fan Hook of 10 43 each ₹

mm M.S. Round bar grouted in RCC

slab with Making the site as original.

116 1 Supplying & erecting approved make 1687 each ₹

low noise decorative exhaust fan having

square frame ABS body with inbuilt

lowers & square frame.200mm with

117 1 Supplying and erecting approved make 2509 each ₹

oscillating type bracket fan A.C. 23OV.

50cy/s 400/450 mm sweep wall

mounted with height adjustment and

rotary tilting device complete with guard,

flexible Core plug top complete erected

with lead wires as directed.catt-ii

118 1 Supplying and erecting approved make 2120 each ₹

pedestal fan A.C. 230V. 50 Cy/s.

mm sweep oscillating, type and

adjustable, height complete with guard

regulator, & standard lead flexible wires

and plug top.catt-iii

119 1 Conveyance charges for Ceiling fan, Table 26 each ₹

fan, Exhaust fan, Pedestal fan, Bracket fan

and cabin fan etc.(from store to worksite OR

site to workshop or back for repairing)

120 1 Removing the installed Ceiling fan / 43 each ₹

Exhaust Fan for servicing / repairing from

ceiling and reinstalling the same after

making in working condition.

121 1 Servicing the uninstalled ceiling fan with 34 each ₹

washing & throughing blades, canopies,

making dry , checking all nut-bolts,

replacing quarter pin & oiling /greasing and

testing complete.

122 1 Rewinding of Any fan by using supper 398 each ₹

enamelled copper wire and over hauling and

putting in working order with original speed

with guarantee for one year including credit

of D.M. retained by Agency.

123 1 Replacing the bearing/ bushing of Ceiling 102 each ₹

fan and putting the fan in working order

including credit of D.M. retained by

Agency.(a) Bearing

124 1 Replacing the bearing/ bushing of Ceiling 43 each ₹

fan and putting the fan in working order

including credit of D.M. retained by

Agency.(b) Bushing

125 1 Replacing condenser for ceiling fan/ 64 each ₹

Exhaust Fan / Pedestal Fan / Table Fan /

Cabin Fan {Credit of D.M. retained by

126 1 Replacing the bearing/ bushing of Table fan 85 each ₹

Pedestal Fan / Exhaust Fan and putting the

fan in working order including {Credit of

D.M. retained by Agency.}(a) Bearing

127 1 Replacing the bearing/ bushing of Table fan 51 each ₹

Pedestal Fan / Exhaust Fan and putting the

fan in working order including {Credit of

D.M. retained by Agency.}(b) Bushing

rubber, ring, washers

128 1 Rewinding of 2900 RPM, 25OV. Fan Motor 484 each ₹

of air circulators by using supper enamelled

copper wire and over hauling & put in

working order with original speed with

guarantee for one year including

transportation from site & back including

{Credit of D.M. retained by Agency.}

129 1 Repairing and Reconditioning of CF by 200 each ₹

welding the shaft portion & making the shaft

as per bearing size by grinding and putting it

into working order

130 1 Exide Xpress xp 130Ah 12 v 17350 each ₹