SPL REPAIR OF BLDG NO T-63 (COOK HOUSE) UNDER GE DEHRADUN

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified

Ditto as item No. 03 above, but except brick complete all as specified.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified

Taking down wooden chowkhats or frames with shutters area n. exc 1.5 sqm each (without taking off shutter from the frame) complete.

Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S&F Pressed steel frames of size 125x65 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Frame filled with and including in cement concrete1:2:4 type B0 using 12.5 mm graded stone aggregate complete all as specified and as directed.

M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S&F 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood (Shisham).

M & L applying two coats of synthetic enamel paint on new or previously untreated wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and as directed.

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long with stainless steel grill consisting of 12 mm square bar & 40 x 5 mm thick SS flat all around incl making good of existing surfaces with plaster and external (cement base paint)/ internal (OBD) finishes complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified.

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete all as specified and as directed.

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and as directed.

M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and as directed.

S&F 18 mm thick WPC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F 18 mm thick WPC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F magnetic catcher and striking plate including letting in and fixed and complete all as specified and as directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete

Demolition of reinforced cement concrete, of any description complete all as directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces complete all as specified and as directed.

M & L for RCC (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors ,roof slabs, shelves and cover slab Including demolition of existing old RCC complete all as specified and as directed.

S & F mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L 16-18 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M&L grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed. (Note: Hollow steel sections will not be used against this item).

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and as directed.

M&L double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

All as per item No 43.00 here in above but as in skirting fixed over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for Machine cut kota stone as in skirting 16-18 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge.

M&L Hardcore of broken stone or boulder gauge exc 63 mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, incl demolition of existing tile complete all as specified and as directed.

M & L for sand filling under floors or in foundations including spreading & levelling complete all as specified directed.

M & L for pre-painted coloured (Red/Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete and all as specified and as directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

M& L salt glazed stone ware (SGSW) drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

M& L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

M & L for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded complete) smooth finished and reforming benching as required complete (internal dia of pipe 150mm).

S & F in repair 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed three layered hoisted and fixed in position including dismantling existing unservicable tank complete all as specified in SSR part I

S&F 20 mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and as directed.

S & F stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm all as specified and directed.

S&F 15mm dia brass chromium plated Kitchen sink mixer with accessories for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repairs plate rack 200mm and size 1.5 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed in walls complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in reapir PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and as directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the independent board with other switchs.

One 5 pin 5/6 Amps socket outlet point on same board controlled by one, one way switchs.

Description all as per item No 83 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F in replacement switch piano, flush type, single pole one way 6 Amp .

S & F in replacement switch piano, flush type, single pole one way 16Amp .

S & F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 6 Amp.

S&F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator .

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body .

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2x 1.5 Sqmm + 1x1.5 Sqmm

S & F in replacement MCB SP 240 volts 'B' Curve 10 KA . including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed

S & F in replacement MCB DB, sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:-

8 way SPN DB.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm Sweep, 900 RPM complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and Fixing in replacement high prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc. GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

M/S JAI PRAKASH GOEL (BID ID -3404722)

M/S ROORKEE ENGINEERING (BID ID -3405927)

V S ENTERPRISES (BID ID -3404882)

Shri Radhey Associates (BID ID -3405908)

M/S C S AITHANI (BID ID -3405093)

M/s Yashwant Singh (BID ID -3405076)

Pragati Enterprises (BID ID -3405983)

MOHAN LAL GUPTA (BID ID -3404965)

ACE BUILDERS AND CONTRACTORS (BID ID -3405901)

M/s Anil Kumar (BID ID -3405522)

M/s Pradeep Kumar (BID ID -3404764)