Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
29 Aug 2026, 12:00 pm3d left
Executive Engineer( Electrical)
NKDA, 3rd Floor, Plot No-DG/13, New Town, Kolkata-700156
Memo No - 5103 /EE-E/NKDA/Elect -79/2026-27 - Repair, replacement and restoration of unserviceable street lights installed at Action Area-IIA, IIB, IIF, IIG and CBD Area at New Town, Kolkata
2026_NKDA_1037877_1
NOTICE INVITING e-Quotation No. WBNKDA/10/EE-E/ 2026-27
Open Tender
Electric Works
Item Rate
180 days
AA-II New Town, Kolkata
1. Intending tenderers should produce credentials of a similar nature of completed work of the minimum value of Rs. 12,00,000.00, only, during 5 (five) year prior to the date of issue of the tender notice
3 documents required · 3 mandatory
₹0
₹60,000
13 Aug 2026
13 Aug 2026
31 Aug 2026
13 Aug 2026
29 Aug 2026
13 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥ 135 im/Watt). Supplying , Installation, Testing and Commissioning of street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage : 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C,, internal surge protection of 5KV L,N,E as per IEC 61000-4-5, Driver efficicency >85%, THD <10% as per IEC 61000-3-2, P.F> 0.95, IP-66, IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement, suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minium 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin), SDCM (standard Deviation color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 Sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc, as required with Minium 5 year OEM warranty. system lumen efficacy ≥135 lm/Watt output. LM79 & LM80 Test report and all testing rewquired for LED fixtures as per BIS shall be submitted. shape size and CCT shall be as approved by Engineer-In Chage as per requirement. (Thermal management : heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) | |||||
| 1.1 | 150 Watt | 352 | Each | - | - |
| 2LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | |||||
| 2.1 | (a) 200 watt | 8 | Each | - | - |
| 3Supplying of following XLPE insulated aluminium conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 with upto datae amendments :- | |||||
| 3.1 | (a) 4 core 16 Sqmm | 2,400 | RM | - | - |
| 4 | Multi core PVC lnsulated Flexable Cu Cable : 3 Core 1.5 (Make : Havells/Polycab/Gloster/Mescab) | 600 | RM | - | - |
| 5Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. | |||||
| 5.1 | (a) Upto 35 sq. mm | 600 | RM | - | - |
| 6 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 16 sqmm cable | 102 | Set | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 13.14 MB
WBF2911.pdf
Tender Documents • 0.50 MB
Tendernotice_10AA2.pdf
Tender Documents • 13.14 MB
BOQ_2549616.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].