Rewiring of PHC building at Naggar Tehsil Manali Distt Kullu HP

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in CASING CAPING with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) Group C Makes:Havells, Finolex, RR Kable, KEI, Grandley, Plaza

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class CASING CAPING as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make:- Havells,Finolex,RR Kable, KEI, Grandley,Plaza

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x10 Sq. mm.

4x10 Sq. mm.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Makes:- Havells,Finolex,RR Kable,KEI,Grandley,Plaza

3x1.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge.Makes:Havells (REO) (Athena), Goldmedal(Air) (GIFa),Anchor(Penta), Legrand (arteor),L&T (Entice),SSK

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Makes:-Havells (REO) (Athena), Goldmedal(Air) (GIFa),Anchor(Penta), Legrand (arteor), L&T(Entice),SSK

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) Single pole. Cat-A.Makes: Havells, ABB, Legrand, L&T,schneider,C&S, SSK

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) 63 A DP.Makes:-Havells, ABB, Legrand,L&T,schneider,C&S, SSK

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) 63 Amps.(Category-A)Make:-Havells, ABB, Legrand, L&T, schneider, C&S, SSK

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. (But without MCB/RCCB/Isolator) Makes:Havells,ABB,Legrand,L&T,schneider,C&S, SSK

8 way , Double door

12 way , Double door

S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. Specification of LED fittings:Wattage of LED fittings As per following parameter,Diffuser Polycarbonate diffuser/PMMA, Operating voltage140 V to 270 V, AC supply or better,Input frequency 50 Hz + 1 Hz ,Power factor Minimum 0.90 ,Luminaire efficacy >100 lm/w,CRI shall be greater than 80 ,Working/ operating temperature 0 to + 45c or better,Color temperature 60000K + 10% , Electronic Driver Operating voltage 140 V to 270 V AC supply ,Constant current output driver,THD Less than 10%,surge protection 2.5 KV minimum , driver efficiency 85%,Shall have under voltage and over voltage protection,2 years against manufacturing defect.,fixture Should comply with LM 79 test from UL/NABL lab.LED MAKE /MODEL/TYPE :Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer as required complete in all respect as per entire satisfaction of Engineer- in- Charge. .i) Lumen output of the fitting 2000 lm Make:-bajaj, havells, panasonic, Philips, Wipro, LT, Changi

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type. i) Exhaust Fan, Light duty, (Domestic) 300 mm sweep Makes:-havells, goldmedal, orient, bajaj

S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.Specification of LED fittings:Wattage of LED fittings As per following parameter,Diffuser Polycarbonate diffuser/PMMA, Operating voltage140 V to 270 V, AC supply or better,Input frequency 50 Hz + 1 Hz ,Power factor Minimum 0.90 ,Luminaire efficacy >80 lm/w,CRI shall be greater than 80 ,Working/ operating temperature 0 to + 45c or better,Color temperature 6000K + 10% , Electronic Driver Operating voltage 140 V to 270 V AC supply ,Constant current output driver,THD Less than 10%,surge protection 2.5 KV minimum , driver efficiency 85%,Shall have under voltage and over voltage protection,2 years against manufacturing defect.,fixture Should comply with LM 79 test from UL/NABL lab.LED MAKE /MODEL/TYPE :Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer i) Lumen output of the fitting, 800 Lm Make:- bajaj, havells, panasonic, Philips, Wipro,LT,Changi

Supplying & fixing wall bracket fitting single lamp with Plastic body holder cap/B22/E27 , (Cat no.LHFOECE1TZ1O014) complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make;-bajaj, havells, panasonic, Philips, Wipro, LT, Changi

Supplying & fixing 25 Watt LED Street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) (Cat No.LPCRSRT25WLC ) complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make:- bajaj, havells, panasonic, Philips, Wipro, LT, Changi

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required complete in all respect as per entire satisfaction of Engineer- in- Charge.

S/E of MCCB 4 Pole 415 Volt. with thermal Release for overload and short circuit protection breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make;-Havells, ABB, Legrand, L&T, schneider, C&S, SSK

MCCB 40- 100 Amp. 36 ka 4 Pole Release without rotary handle

MCCB 300/400 Amp. 50 ka 4 Pole Release without rotary handle

Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel having thickness of 1.6mm, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) 300/400 A Copper Busbar Chambers 24" (SS Enclosure) Make:- Havells, Anchor, SSK