Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Specification No: Ref: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966)

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder TRUE

Address of Registered Office TRUE

Mobile no. +91 TRUE

Printed Name TRUE

Designation TRUE

Place TRUE False

#REF! ATTACHMENT-10

Name : #REF! #REF!

Address : #REF! #REF!

Integrity Pact is annexed herewith this Volume.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between 0 #REF!

Power Grid Corporation of India Limited 0 #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Schedule-I : DSR Scheduled Items

Bidder’s Name and Address (Sole Bidder) : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod, Secunderabad - 500080

All prices are in INR

Sl. No. DSR 2023 Ref No: Service Number SAC (Service Accounting Codes) Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges including GST as per DSR 2023 GST % included in DSR 2023 Unit Erection Charges excluding GST Amount excluding GST GST

SCHEDULE ITEMS - CIVIL

1 2.8.1 18% Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m./ All kinds of soil M3 700.00 260.30 0.1800 220.59 154,413.00 27794.34

2 2.10.1.2 18% Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m (All kinds of soil) : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. M 55.00 352.15 0.1800 298.43 16,413.65 2954.46

3 2.25 18% Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. M3 645.00 196.00 0.1800 166.10 107,134.50 19284.21

4 2.28.1 18% Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift. M2 500.00 34.15 0.1800 28.94 14,470.00 2604.60

5 2.34.1 18% Supplying chemical emulsion in sealed containers including delivery as specified. / Chlorpyriphos/ Lindane emulsifiable concentrate of 20% M2 340.00 234.75 0.1800 198.94 67,639.60 12175.13

6 1.1.2 18% CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Earth Up to 1 Km M3 50.00 217.55 0.1800 184.36 9,218.00 1659.24

7 4.1.3 18% Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) M3 1.50 7,878.50 0.1800 6,676.69 10,015.04 1802.71

8 4.1.8 18% Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : / 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). M3 99.00 6,812.00 0.1800 5,772.88 571,515.12 102872.72

9 4.11 18% Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). M2 55.00 495.75 0.1800 420.13 23,107.15 4159.29

10 4.12 18% Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specifications Per 50kg cement 6.00 18.15 0.1800 15.38 92.28 16.61

11 4.4.1 18% Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) M3 1.00 8,340.85 0.1800 7,068.52 7,068.52 1272.33

12 4.5.1 18% Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3coarse sand), cost of required centering complete. : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). M3 2.00 10,105.10 0.1800 8,563.64 17,127.28 3082.91

13 4.17 18% Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth. M2 71.00 749.30 0.1800 635.00 45,085.00 8115.30

5.1.2 18% Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). M3 130.00 9,045.75 0.1800 7,665.89 996,565.70 179381.83

14 5.2.2 18% Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) M3 22.50 10,852.95 0.1800 9,197.42 206,941.95 37249.55

15 5.3 18% Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). M3 194.00 11,505.50 0.1800 9,750.42 1,891,581.48 340484.67

5.9 18% Centering and shuttering including strutting, propping etc. and removal of form for 0.1800 0.00 0.00 0.00

16 5.9.1 18% Foundations, footings, bases of columns, etc. for mass concrete. M2 116.00 392.15 0.1800 332.33 38,550.28 6939.05

17 5.9.2 18% Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. M2 81.00 842.50 0.1800 713.98 57,832.38 10409.83

18 5.9.3 18% Suspended floors, roofs, landings, balconies and access platform. M2 716.00 927.25 0.1800 785.81 562,639.96 101275.19

19 5.9.5 18% Lintels, beams, plinth beams, girders, bressumers and cantilevers. M2 955.00 736.40 0.1800 624.07 595,986.85 107277.63

20 5.9.6 18% Columns, Pillars, Piers, Abutments, Posts and Struts. M2 205.00 961.30 0.1800 814.66 167,005.30 30060.95

21 5.9.7 18% Stairs, (excluding landings) except spiral-staircases. M2 36.00 764.95 0.1800 648.26 23,337.36 4200.72

22 5.9.16.1 18% Edges of slabs and breaks in floors and walls. Under 20 cm wide M 50.00 208.55 0.1800 176.74 8,837.00 1590.66

23 5.9.19 18% Weather shade, Chajjas, corbels etc., including edges. M2 18.00 951.10 0.1800 806.02 14,508.36 2611.50

24 5.16 18% Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 Coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size). M3 2.00 20,355.80 0.1800 17,250.68 34,501.36 6210.24

25 5.22.6 & 5.22A.6 18% Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars KG 41,000.00 107.85 0.1800 91.40 3,747,400.00 674532.00

26 5.28 18% Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS: 1838,including cost of primer, sealing compound Grade-A in expansion joints. per cm depth per 100m 4.00 655.75 0.1800 555.72 2,222.88 400.12

27 6.1.2 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). Note: Fly ash brick of same class confirming to relavent IS code can also be used M3 18.00 7,132.25 0.1800 6,044.28 108,797.04 19583.47

28 6.4.2 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Fly ash brick of same class confirming to relavent IS code can also be used M3 175.00 9,105.95 0.1800 7,716.91 1,350,459.25 243082.67

29 6.8 18% Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 (75kg/sq,cm) in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and up to floor five level. M2 25.00 865.65 0.1800 733.60 18,340.00 3301.20

30 6.13.2 18% Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) M2 166.00 1,123.80 0.1800 952.37 158,093.42 28456.82

31 6.15 18% Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. M2 166.00 104.80 0.1800 88.81 14,742.46 2653.64

32 7.1.1 18% Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). M3 140.00 7,311.25 0.1800 6,195.97 867,435.80 156138.44

33 7.2.2 18% Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level,including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) M3 48.00 9,275.45 0.1800 7,860.55 377,306.40 67915.15

34 7.8.2 18% Coursed rubble masonry with hard stone in superstructure above plinth level and upto floor five level. Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 coarse sand) M3 52.00 10,128.10 0.1800 8,583.14 446,323.28 80338.19

35 8.2.2.2 18% Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm. M2 15.00 5,136.50 0.1800 4,352.97 65,294.55 11753.02

36 8.3.2 18% Providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. M 25.00 510.95 0.1800 433.01 10,825.25 1948.55

37 8.5 18% Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble / Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. EA 10.00 978.70 0.1800 829.41 8,294.10 1492.94

38 9.20.1 18% Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. M2 18.00 3,473.85 0.1800 2,943.94 52,990.92 9538.37

39 9.1.1 18% Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood M3 1.00 142,949.70 0.1800 121,143.81 121,143.81 21805.89

40 9.23 18% Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). M2 38.00 462.35 0.1800 391.82 14,889.16 2680.05

41 9.46.3 18% Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm dia. M 60.00 525.55 0.1800 445.38 26,722.80 4810.10

42 9.48.2 18% Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. KG 500.00 238.35 0.1800 201.99 100,995.00 18179.10

43 9.74 18% Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm 0.1800 0.00 0.00 0.00

46 9.76 18% Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). EA 16.00 845.65 0.1800 716.65 11,466.40 2063.95

9.81 18% Providing and fixing bright finished brass handles with screws etc. complete : 0.1800 0.00 0.00 0.00

49 9.82 18% 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. EA 16.00 121.65 0.1800 103.09 1,649.44 296.90

50 9.84 18% Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm) with double speed adjustment with necessary accessories and screws etc. complete. EA 4.00 983.15 0.1800 833.18 3,332.72 599.89

51 9.147.A4.2 18% Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (Zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). M2 40.00 10,874.20 0.1800 9,215.42 368,616.80 66351.02

9.147.C2.3 18% Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Fixed window / ventilator with mullion / transom. Using R3 series with frame (55 mm & above )x (45 mm & above) & mullion (55 mm & above)x (65 mm & above). (Height upto 2.5 metre) M2 25.00 7,827.75 0.1800 6,633.69 165,842.25 29851.61

52 10.5.2 18% Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. : Using flats 30x6mm for diagonal braces and central cross piece. M2 2.10 5,563.75 0.1800 4,715.04 9,901.58 1782.28

53 10.16.2 18% Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Hot finished seamless type tubes. Note: For Grills above compund wall, Gates, railing etc KG 550.00 206.35 0.1800 174.87 96,178.50 17312.13

54 10.28 18% Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). KG 350.79 772.40 0.1800 654.58 229,622.22 41332.00

55 11.23.5 18% Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Udaipur green / Rajnagar plain marble. M2 37.00 2,428.60 0.1800 2,058.14 76,151.18 13707.21

56 11.24 18% Extra for pre finished nosing to treads of steps of marble stone. M 60.00 719.90 0.1800 610.08 36,604.80 6588.86

57 11.25 18% Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . M2 27.50 851.80 0.1800 721.86 19,851.15 3573.21

58 11.41A.2.2 18% Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm M2 530.00 1,798.80 0.1800 1,524.41 807,937.30 145428.71

59 11.41A.3.1 18% Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm M2 85.00 1,464.85 0.1800 1,241.40 105,519.00 18993.42

60 12.22 18% Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. EA 5.00 298.25 0.1800 252.75 1,263.75 227.48

61 12.41.1 18% Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. : 75 mm diameter M 75.00 248.80 0.1800 210.85 15,813.75 2846.48

62 12.41.2 18% Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. : 110 mm diameter M 35.00 377.40 0.1800 319.83 11,194.05 2014.93

63 12.42.1.2 18% Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (Coupler ) : 110 mm EA 5.00 136.15 0.1800 115.38 576.90 103.84

64 12.42.3.2 18% Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (Single tee with door ) : 110x110x110 mm EA 5.00 234.15 0.1800 198.43 992.15 178.59

65 12.42.5.2 18% Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (Bend 87.5° ) : 110 mm bend EA 5.00 150.35 0.1800 127.42 637.10 114.68

66 12.42.6.2 18% Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (Shoe (Plain) ) : 110 mm Shoe EA 5.00 131.85 0.1800 111.74 558.70 100.57

67 12.43.2 18% Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 110 mm EA 20.00 371.30 0.1800 314.66 6,293.20 1132.78

68 12.46 18% Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. EA 5.00 84.55 0.1800 71.65 358.25 64.49

69 12.45.3 18% Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.]. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.|. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 201.50 1,529.10 0.1800 1,295.85 261,113.78 47000.48

71 13.5.2 18% 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) M2 720.00 395.35 0.1800 335.04 241,228.80 43421.18

72 13.11 18% 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). M2 685.00 518.55 0.1800 439.45 301,023.25 54184.19

13.16.1 18% 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) Note: For Ceiling plaster and RCC exposed surfaces. M2 1,350.00 300.45 0.1800 254.62 343,737.00 61872.66

73 13.33.1 18% Pointing on stone work with cement mortar 1:3 (1 cement:3 fine sand) : Flush/ Ruled pointing M2 453.00 385.40 0.1800 326.61 147,954.33 26631.78

13.85.3 18% Applying primimg coaty with primer of approved brand and manufacture having low VOC (Volatile organic compound ) content : with water thinnable cement primer on wall surface having VOC content less than50grams/Litre . M2 1,850.00 73.95 0.1800 62.67 115,939.50 20869.11

74 13.47.1 18% Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @0.90 lit/10sqm ) 2.20 kg/10 sqm). Note: Weather guard of Berger or Ultima plus of asian paints M2 1,075.00 171.10 0.1800 145.00 155,875.00 28057.50

75 13.85.1 18% Applying priming coats with primer of approved brand and manufacture ,having low VOC (Volatile organic compound) content: With ready mixed pink or Grey primer on wood work (hard and soft wood) having VOC content less than 50gms /litre M2 50.00 70.35 0.1800 59.62 2,981.00 536.58

76 13.62.1 18% Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.over an under coat of suitable shade with ordinary paint of approved brand and manufacture M2 60.00 226.25 0.1800 191.74 11,504.40 2070.79

77 13.68.1 18% French spirit polishing : Two or more coats on new works including a coat of wood filler. M2 55.00 446.25 0.1800 378.18 20,799.90 3743.98

13.80 18% Providing and applying minimum 1 coats or more of white cement based putty of required thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. M2 1,850.00 156.05 0.1800 132.25 244,662.50 44039.25

78 13.83.2 18% Wall painting with premium acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. : Two coats. M2 1,850.00 142.80 0.1800 121.02 223,887.00 40299.66

79 16.68 18% Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. M2 120.00 972.00 0.1800 823.73 98,847.60 17792.57

80 16.69 18% Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). CUM 1.00 10,117.60 0.1800 8,574.24 8,574.24 1543.36

81 16.79 18% Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts,laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density,complete as per specifications and directions of Engineer-in-Charge. CUM 67.00 2,914.30 0.1800 2,469.75 165,473.25 29785.19

82 17.10.1.3 18% 17.10.1.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required (Kitchen sink with drain board ) : 510x1040 mm bowl depth 200mm. EA 1.00 7,159.00 0.1800 6,066.95 6,066.95 1092.05

17.28.2 18% Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe: 0.1800 0.00 0.00 0.00

85 17.32.1 18% Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450mm dia EA 7.00 1,479.05 0.1800 1,253.43 8,774.01 1579.32

18.7 18% Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 0.1800 0.00 0.00 0.00

18.'8 18% Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 0.1800 0.00 0.00 0.00

18.9 18% Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 0.1800 0.00 0.00 0.00

95 18.18.3 18% Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore EA 2.00 464.05 0.1800 393.26 786.52 141.57

19.1 18% Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.1800 0.00 0.00 0.00

19.2 18% Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 0.1800 0.00 0.00 0.00

98 19.4.1.1 18% Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design (100x100 mm size P type ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EA 8.00 2,707.65 0.1800 2,294.62 18,356.96 3304.25

99 19.7.1.1 18% Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 EA 6.00 12,770.55 0.1800 10,822.50 64,935.00 11688.30

100 19.8.1.1 18% Extra for depth for manholes - Size 90x80 cm : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 M 2.00 8,825.40 0.1800 7,479.15 14,958.30 2692.49

101 19.32.1 18% Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 26,861.90 0.1800 22,764.32 22,764.32 4097.58

102 21.1.1.2 18% Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) - For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 150.00 530.90 0.1800 449.92 67,488.00 12147.84

103 21.1.2.2 18% Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required: Powder coated aluminium (minimum thickness of powder coating 50 micron) Note: All fixtures like Aluminium handles, stay pegs, hingles, Al. grills of approved pattern will also be measured under this item on weight basis. KG 200.00 634.45 0.1800 537.67 107,534.00 19356.12

104 21.18 18% Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). Note: The glass to be fixed in railing of Balconies shall also be measured under this item. M2 9.00 5,325.90 0.1800 4,513.47 40,621.23 7311.82

105 21.4.1 18% Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. : With stainless steel cover plate minimum 1.25 mm thickness. EA 4.00 2,823.85 0.1800 2,393.09 9,572.36 1723.02

21.3 18% Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.1800 0.00 0.00 0.00

106 21.3.2 18% With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) M2 10.00 1,505.25 0.1800 1,275.64 12,756.40 2296.15

107 22.3 18% Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontalsurface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.). M2 41.00 769.60 0.1800 652.20 26,740.20 4813.24

108 22.7.1 18% Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto300mm height including cleaning the surface before treatment. b)Laying brick bats with mortar using broken bricks/brick bats of 40mm nominal size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c)After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d)Finishing the surface with 20 mm thick jointless cement mortar of mix1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120mm and minimum thickness at khurra as 65 mm. M2 410.00 1,684.60 0.1800 1,427.63 585,328.30 105359.09

109 11.55.1 18% Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick tone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. M2 10.00 3,186.70 0.1800 2,700.59 27,005.90 4861.06

110 26.86.5 18% Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 26.86.5 Frame size 65 x 100 mm Meter 55.00 1,111.30 0.1800 941.78 51,797.90 9323.62

111 26.87.1 18% 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.87.1 30 mm thick M2 9.00 4,346.70 0.1800 3,683.64 33,152.76 5967.50

TOTAL FOR SCHEDULE ITEMS -CIVIL 19,015,509.13 3,422,791.64

DSR 2022 SCHEDULE ITEMS - ELECTRICAL

Supply, Installation, Testing & Commissioning of the following items as per the specification, approved drawings and as per the instructions of Engineer-In-Charge (E-I-C) 0.1200 0.00 0.00 0.00

1 1.27 18% Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 0.1200 0.00 0.00 0.00

6 1.26 18% Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 100.00 40.00 0.1200 35.71 3,571.00 642.78

7 1.18.2 18% Supply and drawing of 2-Pair, 0.5mm dia FRLS PVC insulated annealed copper conductor, unarmoured Telephone cable, in the existing concealed PVC conduit, and termination at both ends in telephone JB/Exchange/in modular box including crimping to socket Metre 500.00 38.00 0.1200 33.93 16,965.00 3053.70

8 1.19 18% Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Metre 500.00 47.00 0.1200 41.96 20,980.00 3776.40

1.24 18% Supply, Fixing and Termination of Modular type switches and accessories, on the existing modular plate 0.1200 0.00 0.00 0.00

17 1.25 18% Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 45.00 369.00 0.1200 329.46 14,825.70 2668.63

18 1.33 18% Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 180.00 87.00 0.1200 77.68 13,982.40 2516.83

19 1.34 18% Supplying and fixing brass batten/ angle holder including connection etc. as required. Each 80.00 131.00 0.1200 116.96 9,356.80 1684.22

20 1.53.1 18% Supply & drawing and termination of PVC Insulated UTP 4 pair Cat-6 LAN Cable, in concealed conduit - 1 run of cable Metre 500.00 57.00 0.1200 50.89 25,445.00 4580.10

TOTAL FOR SCHEDULE ITEMS - ELECTRICAL 277,563.06 49,961.35

Total of Schedule (CIVIL and E& M) Items as per DSR excluding Rebate 19,293,072.19 3,472,752.99

Percentage (%) above/below +/- on DSR 2021 Rates excluding GST mentioned above (to be quoted by Bidder) 0.00

Add Amount above/below +/- on the amount for DSR Items as per quoted percentage

Total of Schedule I excluding GST considering offered % Rebate

As the %variation w.r.t total DSR Amount cell left Blank the bid is considered as Non-responsive

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Schedule-II : Non-Scheduled Items

Bidder’s Name 0 To:

Address : 0 Contract Services

0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

Kavadiguda Main Raod, Secunderabad - 500080

Sl. No. Service Number SAC Code Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Rate without GST Total Amount GST Remarks 84

A NON-SCHEDULE ITEMS: CIVIL

NS_1 Diluting & injecting chemical emulsion for anti termite 18% Diluting and injecting chemical emulsion (to be supplied under other item) for PRE-CONSTRUCTIONAL anti-termite treatment and creating a continuous chemical barrier under and around the columns pits, wall trenches, basement excavation, along the external perimeter of retaining wall, expansion joints, over top surface consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc., complete as per specifications. Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration. (cost of Chlorpyriphos/ Lindane emulsifiable concentrate shall be paid separately. Basement floor slab area of the building only shall be measured for payment) M2 386.00 0 0.00 TRUE FALSE

NS_2 Sunken filling with 40 mm dia pipe spout 18% Providing and placing cinder/brick bat or any light weight water absorbing materials filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation,making hole or core to the beam/wall for providing 40mm dia PVC drain (spout pipe) pipe of required length, pipe should be fixed properly to the beam or wall with water proofing compound with cover the inlet pipe mouth with SS jali and packing with 40/20/10 mm stone aggregate with sufficent quantity. For toilet and Kitchen sunkun portions. CUM 6.50 0 0.00

NS_3 filling in plith floor 18% Supplying and filling in plinth with crushed stone sand / river sand under floors, including watering, ramming, consolidating and dressing complete. CUM 50.00 0 0.00

NS_4 Chicken wire mesh for plaster 18% Providing & fixing chicken wire mesh 24 gauge at junctions of RCC and masonry walls including fixing in position, scaffolding etc. complete as directed by Engineer-in-charge. M2 47.00 0 0.00

NS_5 Vetrifeid wall tiles size 600X1200 18% Providing and laying Vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser and dado laid on 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm M2 138.00 0 0.00

NS_6 SWR pipe 110 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 110mm outer dia. RM 90.50 0 0.00

NS_7 SWR pipe 75 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 75mm outer dia. RM 35.00 0 0.00

NS_8 Nahani/floor Trap 18% Providing, fixing, testing and commissioning uPVC SWR self cleaning Nahani trap, plain floor trap/ Multi floor trap etc. confirming to IS-14735 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. EA 25.00 0 0.00

NS_9 coping 18% Providing and laying coping 480mm wide & 50mm average thick over stone wall with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) at all heights, with drip groove including centering and shuttering and removal of form works and finishing the exposed surface with plaster of 6mm thick in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete. Metre 85.00 0 0.00

NS_10 groove in marble/granite steps 18% Providing and moving two grooves 20mm wide 2mm deep as per approved pattern near nosing for marble stair steps including rubbing cleaning complete. Metre 65.00 0 0.00

NS_11 extra for vertical false ceiling 18% Extra for providing and fixing vertical faces in the above false ceing with 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I upto a height of 150mm with suitable supproting system and finishing the joints, edges etc., complete as per the directions of Engineer-in-charge. Metre 400.00 0 0.00

NS_12 SWR Pipe 160 mm 18% Providing and fixing soil, waste and vent pipes with unplsticised rigid PVC 160mm dia pipes conforming IS 13592 Type B. all complete as directed by the Engineer in charge. RM 10.00 0 0.00

NS_13 SS Mesh for sliding window 18% Providing and fixing stainless steel 304 grade mesh of average width of aperture 1.4 mm and nominal dia of wire 0.50 mm to uPVC/aluminium windows with suitable beading/clips a as per drawings and as directed by engineer in charge. The uPVC/aluminium section of windows shall be measured under relevant items. Actual area of mesh provided shall be measured for payment. M2 38.00 0 0.00

NS_14 Tap for washing Machine 18% Providing and fixing CP Brass Tap of reputed brand suitable for fixing of washing machine. EA 1.00 0 0.00

NS_15 Parking Tiles 18% Providing and laying parking tiles of minimum 25m thickness over cement mortar bas 1:4 (1 cement : 4 Coarse sand). The tiles shall be of reputed brand like Eurocon or equivalent and having minimum compressive strength of 30 N/Sqmm. M2 30.00 0 0.00

NS_16 MS sheet box for ceiling Fan 18% Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp with its top surface hacked for proper bonding, top lid shall be screwed into the M.S. sheet box . Clamp shall be made of 12mm dia M.S. bar bent to shape. EA 26.00 0 0.00

NS_17 WC europian floor mounted with cistern 18% Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with dual flush system, conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid . Make : Hindware model :Cube standard closet -20092 +sleek fresh dual flush tank-510411 or equivalant. EA 2.00 0 0.00

NS_18 Kitchen sink Tap 18% Providing and fixing premium quality C.P. brass Kitchen sink Tap with cover plate fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : FLR-CHR-5347N or equivalant. EA 1.00 0 0.00

NS_19 CPVC Ball Valve 25 mm dia 18% Providing and fixing CPVC Ball Valve 25 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. EA 11.00 0 0.00

NS_20 CPVC Ball Valve 32 mm dia 18% Providing and fixing CPVC Ball Valve 32 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. EA 2.00 0 0.00

NS_21 CPVC Ball Valve 40 mm dia 18% Providing and fixing CPVC Ball Valve 40 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. EA 5.00 0 0.00

NS_22 CPVC Ball Valve 50 mm dia 18% Providing and fixing CPVC Ball Valve 50 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. EA 6.00 0 0.00

NS_23 SS jali for nahani for toilet with cockrage trap 18% Providing and fixing 125 mm dia stainless (SS304) matt finsh steel jali (grating) with or without hole consisting four piece system with Cockroach Trap, and frame thickness 1mm & grating thickness 1.5 mm for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalent. EA 23.00 0 0.00

18% VIP Room and Sr. Executive room sanitary fitting 0 0.00

NS_24 Wall Mixer with shower system 18% Providing and fixing premium quality C.P. brass (shower system) Shower mixer with diverter cover plate chrome finish,including conceled body for single lever high flow diverter with button assembly diverter, bathtub spout with button attachment for hand shower 105 mm dia round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system with flexible tube 12 mm dia & 1.5 meter long with nuts with hand shower,with wall bracket for hand shower,overhead shower 240 dia round shape withshower arm 400 mm long and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : OPP-CHR-15079NKPM + ALD-079N + SPJ-CHR-85463 + HSH-CHR-1715 + SHA-CHR-549D12 + SHA-CHR-555 + SHA-CHR-455L400 + OHS-CHR-1623 or equivalant. EA 3.00 0 0.00

NS_25 Table top Wash Basin all fittings 18% Providing and fixing premium quality over-counter thin rim table top wash basin of any shape minimum size 500X380X120 mm including Pillar cock Faucet with Click Clack Waste coupling, over flow hole, standard C.P. bottel trap, union, Long Braided Hose and all chrome finish and making necessary holes for fixing of pillar coack with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :JDS-WHT-25937 + ALD-CHR-729 + ALD-CHR-769L300X190 + OPP-CHR-15001PM + ALD-CHR-803AB or equivalant. EA 3.00 0 0.00

NS_26 Wall Hung WC with all fittings 18% Providing and fixing premium quality white vitreous china wall hung type rimless back to wall water closet (European type W.C. pan) with seat and lid, 5-6 litre low level combined flushing cistern conceled in wall with control plate , with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : Rimless- Blind installation wall hung WC with single piece conceled Cistern and control plate alive For ACS-WHT-87953BIUFSM + JCS-WHT-2431P + JCP-CHR-852415 or equivalant. EA 3.00 0 0.00

NS_27 Two way Bib Cock With Health Faucet 18% Providing and fixing premium quality C.P. brass two way bib cock with cover plate along with premium quality C.P. health Faucet of approved quality and make of the required length of flexible pipe upto the angle cock/connection, clamp to hold the same, fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : OPP-CHR-15041PM + ALD-CHR-573 or equivalant. EA 3.00 0 0.00

NS_28 Angle Valve 18% Providing and fixing premium quality C.P. brass angle valve with cover plate for WCs, Wash basin, health Faucet etc as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : OPP-CHR-15053PM or equivalant EA 6.00 0 0.00

NS_29 Toilet paper Holder 18% Providing and fixing premium quality C.P. Toilet Paper Holder of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AKP-CHR-35753PS or equivalent. EA 3.00 0 0.00

NS_30 Towel Holder 18% Providing and fixing premium quality C.P. swivel towel holder twin type of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : ACN-1115S or equivalent. EA 3.00 0 0.00

NS_31 Grab Bar 18% Providing and fixing premium quality C.P. Grab Bar 450 mm long of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AHS-CHR-1503 or equivalent. EA 3.00 0 0.00

NS_32 Coat Hook 18% Providing and fixing premium quality CP Brass coat hook of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AQN-CHR-7761 or equivalant. EA 3.00 0 0.00

NS_33 Towel rack 18% Providing and fixing premium quality C.P. towel Rack of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : AHS-CHR-1581H or equivalent. EA 3.00 0 0.00

NS_34 Soap Dish Holder 18% Providing and fixing premium quality CP Brass Soap Dish holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35731P or equivalant. EA 3.00 0 0.00

NS_35 Tumbler Holder 18% Providing and fixing premium quality CP Brass Tumbler holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35741P or equivalant. EA 3.00 0 0.00

NS_36 Soap Dispenser 18% Providing and fixing premium quality CP Brass Soap dispenser with glass bottle of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35735P or equivalant. EA 3.00 0 0.00

NS_37 Shower Basket large 18% Providing and fixing premium quality CP Brass shower basket large chrome finish of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :ACN-CHR-1179N or equivalant. EA 3.00 0 0.00

NS_38 Stop Coack with Fiitings 18% Providing and fixing premium quality CP Brass concelead stop coack chrome finish with fitting sleeve, operating lever & adjustable wall flange with seal with Concealed Body of Flush Cock Suitable for 25mm Pipe Line with Protection Cap of standard shape as approved quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :OPP-CHR-15083KPM + ALD-081 or equivalant. EA 3.00 0 0.00

NS_39 LED Mirror with touch sensor 18% Providing and fixing premium quality Led Brightner Led Mirror With Touch Sensor (3 Lights Integrated) size 18 inch X 24 Inch in oval/rectangular/rect-semi circular shape as approved by engineer-in-charge, Glass materials saint-gobin or equivalent mirror with PVC/Alumunium frame materials with smart one touch on/off with led light in three colours and quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Mirrorwala/accent mirror or Equivalent. EA 3.00 0 0.00

NS_40 Floor Long drain floor Jali 18% Providing and fixing 600X75X32 mm AISI 304 grade stainless steel matt finsh steel long floor drains consisting, drain cover, tray,cockroch trap and side hole (consisting in 5 parts) with jali in bottom of channel for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalent. Make Lipka article no-1056 (weight not less than 1.2kg) EA 3.00 0 0.00

18% Executive Toilets sanitary Fitting 0 0.00

NS_41 Wall Mixer with shower system with fittings 18% Providing and fixing premium quality C.P. brass wall mixer with provision of both hand shower and overhead shower complete with 115 mm long bend pipe on upper side, connecting legs & wall flanges,overhead shower 200 dia round shape single flow with shower arm 400 mm long chrome finish and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FUS-CHR-29281 + SHA-CHR-455L400 + OHS-CHR-1613 or equivalant. EA 5.00 0 0.00

NS_42 Table top Wash Basin all fittings 18% Providing and fixing premium quality over-counter table top wash basin of any shape minimum size 600X440X165 mm including Pillar cock Faucet with Click Clack Waste coupling, over flow hole, standard C.P. bottel trap, union, Long Braided Hose and all chrome finish and making necessary holes for fixing of pillar coack with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :OPS-WHT-15931PM + ALD-CHR-729 + ALD-CHR-769L300X190 + FUS-CHR-29001+ ALD-CHR-803AB or equivalant. EA 8.00 0 0.00

NS_43 Wall Hung WC with all fittings 18% Providing and fixing premium quality white vitreous china wall hung type rimless back to wall water closet (European type W.C. pan) with seat and lid, 5-6 litre low level combined flushing cistern conceled in wall with control plate , with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : Rimless- Blind installation wall hung WC with single piece conceled Cistern and control plate alive For KUS-WHT-35953BIUFSMPM + JCS-WHT-2431P + JCP-CHR-852415 or equivalant. EA 4.00 0 0.00

NS_44 Two way Bib Cock With Health Faucet 18% Providing and fixing premium quality C.P. brass two way bib cock with cover plate along with premium quality C.P. health Faucet of approved quality and make of the required length of flexible pipe upto the angle cock/connection, clamp to hold the same, fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : FUS-CHR-29041 + ALD-CHR-573 or equivalant. EA 5.00 0 0.00

NS_45 Angle Valve 18% Providing and fixing premium quality C.P. brass angle valve with cover plate for WCs, Wash basin, health Faucet etc as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : FUS-CHR-29083K or equivalant EA 14.00 0 0.00

NS_46 Toilet paper Holder 18% Providing and fixing premium quality C.P. Toilet Paper Holder of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AKP-CHR-35753PS or equivalent. EA 5.00 0 0.00

NS_47 Towel Ring 18% Providing and fixing premium quality C.P. Towel ring square with round flange of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : ACN-CHR-1121N or equivalent. EA 5.00 0 0.00

NS_48 Grab Bar 18% Providing and fixing premium quality C.P. Grab Bar 450 mm long of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AHS-CHR-1503 or equivalent. EA 6.00 0 0.00

NS_49 Coat Hook 18% Providing and fixing premium quality CP Brass coat hook of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35761P or equivalant. EA 6.00 0 0.00

NS_50 Towel rack 18% Providing and fixing premium quality C.P. towel Rack 600 mm long of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model :ACN-1181FHS or equivalent. EA 5.00 0 0.00

NS_51 Soap dish Holder 18% Providing and fixing premium quality CP Brass Soap Dish holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35731P or equivalant. EA 5.00 0 0.00

NS_52 Tumbler Holder 18% Providing and fixing premium quality CP Brass Tumbler holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-CHR-35741P or equivalant. EA 5.00 0 0.00

NS_53 Soap Dispenser 18% Providing and fixing premium quality CP Brass Soap dispenser with glass bottle of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AKP-35735P or equivalant. EA 6.00 0 0.00

NS_54 Shower Basket small 18% Providing and fixing premium quality CP Brass shower basket small chrome finish of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :ACN-CHR-1177N or equivalant. EA 5.00 0 0.00

NS_55 Stop Coack with Fiitings 18% Providing and fixing premium quality CP Brass concelead stop coack chrome finish with fitting sleeve, operating lever & adjustable wall flange with seal with Concealed Body of Flush Cock Suitable for 25mm Pipe Line with Protection Cap of standard shape as approved quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FUS-CHR-29083K + ALD-081 or equivalant. EA 6.00 0 0.00

TOTAL FOR NON-SCHEDULE ITEMS: CIVIL 0.00 0

B NON-SCHEDULE ITEMS:ELECTRICAL

Supply, Installation, Testing & Commissioning of the following items as per the specification, approved drawings and as per the instructions of Engineer-In-Charge (E-I-C)

NS_1 Main Distribution Board 18% Main Distribution Board: Supply, installation and commissioning pre-wired, factory fabricated, distribution board of steel sheet for 415V AC system, with double door arrangement, dust protected duly powder painted with tinned copper bus bars of suitable size, incoming cable termination including Glanding, connecting with earth pit with 2 runs of copper wire/strip (incl supply copper wire/Strip of area not less than 8sq.mm for each run up to earth pit) with earth pit and supply, installation and termination of MCCB, MCBs of Type-C, 10kA Short circuit rating) , with following configuration: i. 200A, 16kA, FPMCCB - 1No ii. Busbars for 3-Phases, Neutral and Earthing of Suitable size iii, 32A. MCBs-40 iv. 16A, MCBs -20 v. Red, Yellow, Blue LED indicating lamps for each phase of incomer. SET 1 0.00 0.00

NS_2 Earthing 18% Earthing with Copper earth plate of size 600mmx600mmx3mm size, including all accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7m long, with charcoal/ coke, salt etc. as required Set 1 0.00 0.00

NS_3 Junction box 18% Telephone phone Junction Box, with terminals, concealed type Each 1 0.00 0.00

NS_4 Telephone exchange 18% 4/24 digital EPABX telephone exchange, complete including power supply adapter Each 1 0.00 0.00

NS_5 Telephone phone 18% Telephone phone Instruments, with caller Id display Set 24 0.00 0.00

NS_6 24 Port UTP 18% Supply, Installation, Testing and commissioning of 24 Port UTP Giga Managed Switch with 2SFP Ports populated with modules single mode & 2 UTP Uplink Ports Set 1 0.00 0.00

NS_7 24 Port Jack panel 18% Supply, Installation, Testing and commissioning of 24 Port Jack panel suitable for cat-6 cable and suitable for above switch, including supply and installation of patch cords of 1 Mtrs Lenght for connecting to above switch in the rack from Path Panel to Switch and 12No. Aditional patch cards of 3m length Set 1 0.00 0.00

NS_8 Wireless Acess Point 18% Supply ,Installation , Testing and Commisioning of Wireless Acess Point with ceiling Moutings including Power Adapter Each 1 0.00 0.00

NS_9 32mm dia PVC Conduit in RCC 18% Supply & Laying of 32mm dia PVC Conduit in RCC slab/Brick work (Rigid Medium gauge)- including all accessories required for successful erection like L-Bends, T-Joints, Junction Boxes, screws etc. Metre 700 0.00 0.00

NS_10 25mm dia PVC Conduit in RCC 18% Supply & Laying of 25mm dia PVC Conduit in RCC slab/Brick work (Rigid Medium gauge)- including all accessories required for successful erection like L-Bends, T-Joints, Junction Boxes, screws etc. Metre 400 0.00 0.00

NS_11 PVC Insulated FRLS 1.5 mm2 18% Supply & drawing and termination at both ends of PVC Insulated FRLS multi strand copper wire, in concealed conduit - 1.5 mm2 Metre 2000 0.00 0.00

NS_12 PVC Insulated FRLS 2.5 mm2 18% Supply & drawing and termination at both ends of PVC Insulated FRLS multi strand copper wire, in concealed conduit - 2.5 mm2 Metre 1000 0.00 0.00

NS_13 PVC Insulated FRLS 4.0 mm2 18% Supply & drawing and termination at both ends of PVC Insulated FRLS multi strand copper wire, in concealed conduit - 4.0 mm2 Metre 1000 0.00 0.00

NS_14 PVC Insulated FRLS 6.0 mm2 18% Supply & drawing and termination at both ends of PVC Insulated FRLS multi strand copper wire, in concealed conduit - 6.0 mm2 Metre 300 0.00 0.00

NS_15 2' x 2' LED 18% Light Fittings- 2' x 2' LED, High efficiency, Low power, square lighting fixture suitable for mounting in false ceiling (Model: Philips RC380B LED60, white colour) Each 30 0.00 0.00

NS_16 12W ultra slim square LED 18% Light Fittings -12W ultra slim square LED (cool whitecolur light) light fixture, suitable for fixing in false ceiling of Philips make Each 50 0.00 0.00

NS_17 4ft length, LED 18% Light Fittings - 4ft length, LED light fitting (Make: Philips, Model: LED LINEA BN 550 WLED20, or any other model similar to T5 tube fitting), cool white colour light Each 33 0.00 0.00

NS_18 2ft length, LED 18% Light Fittings - 2ft length, LED light fitting (Make: Philips, Model: LED LINEA BN 550 WLED12, or any other model similar to 2ft sleek tube fitting), cool white / yellow colour light Each 14 0.00 0.00

NS_19 LED night lamp 18% Skirting type LED night lamp fixture, suitable for fixing on concealed GI box Each 12 0.00 0.00

NS_20 Street Light Green LED 18% Street Light Green LED Fitting: Street Light fitting of Philips make of BRP020 1x10W LED, Green smart luminaries (or any other model of Philips green LED street light fitting, with power consumption capacity not less than this fitting) with 3.0 m length GI MS/GI pipe of 114.3dia, 3.65mm thick, suitably embedded into transit camp compound wall. Top end of the pipe shall be welded with 60mm (or suitable other size suitable just for fixing the fitting) dia pipe at an angle, with a free path between the two pipes for laying of connecting wires inside the pipe and with a water proof out door junction box fitted to the pipe, with terminals for termination of incoming wires from switch board and wires from the luminaries and painted with two coats of red oxide and Zinc chromite in a synthetic medium). Fitting shall be connected to the junction box with 1.5 sq.mm or higher size PVC insulated FRLS flexible copper wire. Set 20 0.00 0.00

NS_21 Ceiling Fans - 1400mm 18% Ceiling Fans - 1400mm sweep, 3 blade, 5 Star Rated Each 18 0.00 0.00

NS_22 Exhaust fan 250 V 18% Exhaust fan 250 V A.C 50 Hz,150 mm (or nearest higher size) sweep, 1400 RPM suitable for continuous duty with double ball bearing, Louvers, frame for fixing to wall Each 14 0.00 0.00

NS_23 Fan -400mm 18% Wall Mounted Fan -400mm sweep, 1300RPM or more Each 24 0.00 0.00

NS_24 RJ - 45 18% RJ - 45 computer sockets for Cat-6 Each 24 0.00 0.00

NS_25 GI Box 18% Octogonal/Circular GI Box with Hook suitable for installation oin RCC ceiling for ceiling fan. Each 18 0.00 0.00

NS_26 Calling Bell 18% Calling Bell of reputed make and model,as per directions of Engineer-in-charge Each 12 0.00 0.00

NS_27 Electronic call point 18% Supply, Installation and commissioning of wall mounted 12 or more window electronic call point annunciator panel with LED visual and audio alarm, manual reset facility suitable to operate on 230V AC supply voltage (with suitable adapter being supplied by the manufacturer, if required) (inputs for the panel will be from various room bell push switches. However wiring between the rooms and the panel is not included in this item) Set 1 0.00 0.00

NS_28 Cable 3.5x70sq.mm 18% Incoming Power Supply Cable 3.5x70sq.mm, Aluminium conductor, XLPE, wire armoured cable: Supply, Laying in PVC pipe near the building and direct in ground at a depth of 1.0m below ground, for remaining complete length including excavation, sand cushioning, Bricks, protective covering, back filling and termination at both ends including supply of required accessories like glands, lugs, PVC pipe/PVC bend Metre 300 0.00 0.00

NS_29 Cable 3.5x30sq.mm 18% Incoming Power Supply Cable 3.5x30sq.mm, Aluminium conductor, XLPE, wire armoured cable: Supply, Laying in PVC pipe near the building and direct in ground at a depth of 1.0m below ground, for remaining complete length including excavation, sand cushioning, Bricks, protective covering, back filling and termination at both ends including supply of required accessories like glands, lugs, PVC pipe/PVC bend Metre 300 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Electrical) 0.00 0.00

Total of Non-Schedule Items- Civil and E&M (Schedule - II) False

As all the line items are Left Blank the bid is considered as Non-responsive

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod,

Secunderabad - 500080

Sl. No. Description Total Price (INR)

1.1 TOTAL SCHEDULE NO. I

Supply & Installation Charges- Schedule Civil & Electrical Items for Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

1.2 TOTAL SCHEDULE NO. II

Supply & Installation Charges- Non-Schedule Civil & Electrical Items for Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

I Total of Service/Installation Charge (ITEMS TAB: Item 01 INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) Non-responsive Bid

GST on Schedule-I

GST on Schedule-II

Total GST for BID PRICE SUMMARY Statement ) Non-responsive Bid

III GRAND TOTAL Non-responsive Bid

Date : 0 Printed Name : 0.00

Place : 0 Designation : 0.00

Specification No: Ref: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) Bid Form 2nd Envelope

BID FORM (Second Envelope)

Bid Proposal Ref. No.

Contract Services

Power Grid Corporation of India Ltd.,

Southern Region Transmission System-I

Name of Contract : Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Dear Ladies and/or Gentlemen,

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Non-responsive Bid /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. Non-responsive Bid

Sch-1 Schedules Items as per DSR 2021 excluding GST

Sch-2 Non-Scheduled Items

Sch-3 Grand Summary

2.3 We declare that as specified in Clause 4.6, ITB, Vol.-IA of the Bidding Documents, the prices of all the Services to be supplied under this contract shall be FIRM and doesnot subject to any price adjustment as per relevant clauses in bidding document.

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

General guidelines for filling up the Attachments

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3, 4, 5, 6, 7, 8, 9, 11, 13 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

8 Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the 'Second Contract' and /or 'Third Contract' as an independent Contractor (applicable to foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

9 Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable for foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) Sole Bidder

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder 1

2 or more 2 or more

Name of the Bidder 1

Address of Registered Office 2 or more

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-3 (QR)

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Qualifying Requirement Data)

Bidders Name & Address To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of the Qualification Requirements (QR) for bidders, stipulated in Section-III of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in Section-III shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status; 1

b) The principal place of business; 2 or more

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1 Bidder who wish to participate in the tender should have executed and successfully completed similar nature of works for any State/Central Govt. departments/ undertakings/reputed private organizations during last Five years as on the originally scheduled date of bid opening (i) One similar work of value not less than Rs. 178.72 Lakhs or (ii) Two similar works, each of value not less than Rs. 111.70 Lakhs or (iii) Three similar works, each of value not less than Rs. 89.36 Lakhs

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

a) The Minimum Annual Average Turnover*(MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be Rs. 223.40 Lakhs. * Note- “Annual gross revenue from operation/gross operating income as incorporated in the profit &loss account excluding other income”.

Note: In case the bidder is a holding company, the Financial Position criteria referred to in clause 2.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 2.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

RELAXATION FOR MSME BIDDERS MSMEsˆ / START Ups^-: All MSE bidders are exempted from meeting MAAT requirement. Further, START UPs meeting the specified requirements at para 2.0 above shall also be considered qualified if they meet 80% (Eighty percent) of the requirements as specified at para 2.0 above in a financial position.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

(Use separate sheet for each experience/ Contract)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-4

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Alternative, Deviations and Exceptions to the Provisions)

Bidders Name & Address To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Reason for change The change in Bid Prices if the deviation is withdrawn and the Bidder conforms to the Specifications

Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-4

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-5

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Work Completion Schedule)

Bidders Name & Address To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject package i.e., Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-6

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidders Name & Address To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-6

(Information regarding Ex-employees of POWERGRID in our Organisation)

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-6

(Information regarding Ex-employees of POWERGRID in our Organisation)

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-7

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Declaration regarding Social Accountability)

Bidders Name & Address To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) Attachment-8

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Contract & Material

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Southern Region -I Headquarters

0 Kavadiguda Main Road

0 Secunderabad - 500080 (Telangana)

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made 0

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others <---Please select type of Bidder

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable] <--- Please select appropriate option

4. Permanent Account (PAN) No.

5. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

6 Name of the States/UT GSTIN number

a Andhra Pradesh

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Current Account Saving Account Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-9

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Additional Information)

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

In support of the additional information required as per ITB Sub-Clause 9.3 (i) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder : 0 1

Name of the Banker by whom certificate issued 2 or more

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder may result in rejection of Bid.

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

3.0 OTHER INFORMATION

3.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

3.2 Financial Data:

Figures Rs in Million

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-10

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Bidders Name & Address To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Integrity Pact - separately attached herewith in Volume-III.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 1 having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B Package and Specification Number SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-11

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Further, we hereby confirm that except as mentioned in the Schedule – 4 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of our First Envelope :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS

Date 0-Jan-1900 Printed Name 0

Place 0 Designation 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) ATTACHMENT-13

Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

We hereby declare that we abide by the Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID.

Further, we hereby confirm that incase of transgression of CIPP, we are aware that we may get delisted from Registered Suppliers / Contractors and POWERGRID may take other punitive actions such as Cancellation of Contracts, Banning and Blacklisting or action in Competition Commission of India etc.

We hereby confirm that we observe the highest standard of ethics and shall not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) Corrupt Practice

ii) Fradulent Practice

iii) Anti-competitive Practice

iv) Coercive Practice

v) Conflict of Interest

vi) Obstructive Practice

Date 0-Jan-1900 Printed Name 0

Place 0 Designation 0

SPEC. NO.: SR-I/C&M/WC-3882/2024/RFx-5002003955 (SR1/NT/W-CIVIL/DOM/B00/24/13966) Bid Form-1st Envelope 2 nd 2 February

BID FORM 4 th 4 April

Bid Proposal Ref. No. 8 th #REF! 8 August

Date : 3 9 th #REF! 9 September

10 th 10 October

To: 11 th 11 November

12 th 12 December

Power Grid Corporation of India Ltd., 13 th

Southern Region -I Headquarters 14 th

Kavadiguda Main Road 15 th

Secunderabad - 500080 (Telangana) 16 th

In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Plus applicable Octroi, Entry Tax, Other Taxes & Duties or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. 17 th

Name of Contract : Construction of Transit Camp at 400/220KV Gooty Sub-station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. 18 th

Dear Ladies and/or Gentlemen, 19 th

1.0 Having examined the Bidding Documents, including Amendments the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 3.2 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid consisting of Techno – Commercial Part & Price Parts. 20 th

2.0 Attachments to the Bid Form

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments:

(a) Attachment 1 Bid Security, in a separate envelope, for a sum of Rs. 4,47,000 (Rs. Four Lakh Forty Seven Thousand only) initially valid for a period of Seven (7) months from the date set for opening of bids.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 6.

(c) Attachment 3 Bidder’s Eligibility and Qualifications

(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein 30 th

(e) Attachment 5 Work Completion Schedule. 31 st

(f) Attachment 6 Information regarding ex-employees of Employer in Bidder’s firm.

(g) Attachment 7 Declaration regarding Social Accountability

(h) Attachment 8 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(i) Attachment 9 Additional Information

(j) Attachment 10 Integrity Pact

(k) Attachment 11 Declaration

3.0 We are aware that our bid is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in the bid documents

3.2 We declare that as specified in Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

4.0 We confirm that except as otherwise specifically provided our Bid Prices include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied the mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us Single Contract covering all goods and related services.

6.0 We have read the various clauses and provisions in bid documents and confirm that all the specified stipulations are acceptable to us.

Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of Six (06) months from the date initially stipulated for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

(a) Construction of Community Centre at 765/400 kV Kurnool (Oravakal) Sub-Station under Transmission System for evacuation of power from RE sources in Kurnool Wind Energy Zone (3000MW)/ Solar Energy Zone (1500MW) Part-A and Part-B

13.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

15 Further, we hereby confirm that except as mentioned in the Attachment -4 (Deviations) hereof:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents,;

16 We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB

We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred