Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97,828Accepted-AOC | ₹97,828 Quoted ₹97,827.50 | L1 | Accepted-AOC L1 |
| 2 | L2₹1.0 L+₹3,860 (3.95%)Rejected-AOC SALIM MANZIL KARIMANCODE P O PALODE THIRUVANANTHAPURAM 695 562 | KOLLAM | KERALA | 695562 | ₹1.0 L+₹3,860 (3.95%) | L2 | Rejected-AOC L2 |
| 3 | L3₹1.1 L+₹14,139.39 (14.5%)Rejected-AOC | ₹1.1 L+₹14,139.39 (14.5%) | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | N. Anilkumar L2 | UNNIKRISHNAN P L3 | P RAJAKUMAR L1 |
|---|---|---|---|---|---|---|
| 1.00civilworks | ||||||
| 1.01 | 13.88 Removing white or colour wash by scrapping and sand papering and preparing the
surface smooth including necessary repairs to scratches etc. complete. | 10 | sqm | 35 ₹350 | 22 ₹220 Lowest | 50 ₹500 |
| 1.02 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead. | 3.75 | sqm | 300 ₹1,125 | 76 ₹285 | 50 ₹187.5 Lowest |
| 1.03 | od Dismantling and removing water closet squatting pan (Indian type W.C. pan) and
existing PVC/GI pipes carefully and removing the debris within a distance of 50m,
complete as per the
direction of the Engineer in charge | 1 | each | 2,000 ₹2,000 | 480 ₹480 | 300 ₹300 Lowest |
| 1.04 | 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 2 | sqm | 400 ₹800 | 74.52 ₹149.04 | 50 ₹100 Lowest |
| 1.05 | 15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of
material within 50 metres lead as per direction of Engineer - in-Charge.Nominal
concrete 1:4:8 or leaner mix ( including equivalent design mix) | 0.2 | cum | 600 ₹120 Lowest | 1,560 ₹312 | 1,000 ₹200 |
| 1.06 | 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse
sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | 1 | cum | 12,000 ₹12,000 | 7,998 ₹7,998 Lowest | 8,000 ₹8,000 |
| 1.07 | 26.29.1 Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free steel surface by using alkaline chemical rust remover of approved
make with paint brush and removing loose particles after 24 hours of its
application with wire brush and thoroughly washing with water and allowing
it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm
diameter | 3 | mtr | 120 ₹360 | 7.2 ₹21.6 Lowest | 20 ₹60 |
| 1.08 | odFinishing with Epoxy paint (2 or more coats) at all locations prepared and applied as
per
manufacture specification including appropriate priming coat, preparation of surface
etc. complete (on steel work) | 3 | mtr | 200 ₹600 | 122 ₹366 | 50 ₹150 Lowest |
| 1.09 | 26.32.1Providing, mixing and applying SBR polymer (of approved make) modified
Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with
polymer minimum 2% by wt. of cement used) as per specifications and
directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be
done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface
has been satisfactorily evaluated by sounding / tapping with a blunt metal
instrument and/or the 75mm size cube crushing strength at the end of 28 days
to be not less than 30 N/Sqmm2).12 mm average thickness | 3.75 | sqm | 450 ₹1,687.5 | 421 ₹1,578.75 Lowest | 500 ₹1,875 |
Tender Value
₹1.1 L
EMD Value
₹2,900
Closing Date
6 Jul 2026, 5:00 pmClosed
universityengineer
Office of the University Engineer, Engineering unit, Kariyavattom campus
Civil work
2026_KU_857215_1
UE/DB1/ (e-GP)/03/2026-2027
Open Tender
Civil Works - Others
Item Rate
20 days
Kariavattom
Please refer Tender documents.
5 documents required · 5 mandatory
₹555
₹2,900
24 Aug 2026
24 Jun 2026
8 Jul 2026
24 Jun 2026
6 Jul 2026
24 Jun 2026
24 Jun 2026 - 6 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1civilworks | |||||
| 1.01 | 13.88 Removing white or colour wash by scrapping and sand papering and preparing the
surface smooth including necessary repairs to scratches etc. complete. | - | sqm | - | - |
| 1.02 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead. | - | sqm | - | - |
| 1.03 | od Dismantling and removing water closet squatting pan (Indian type W.C. pan) and
existing PVC/GI pipes carefully and removing the debris within a distance of 50m,
complete as per the
direction of the Engineer in charge | - | each | - | - |
| 1.04 | 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | - | sqm | - | - |
| 1.05 | 15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of
material within 50 metres lead as per direction of Engineer - in-Charge.Nominal
concrete 1:4:8 or leaner mix ( including equivalent design mix) | 1 | cum | - | - |
| 1.06 | 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse
sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | - | cum | - | - |
| 1.07 | 26.29.1 Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free steel surface by using alkaline chemical rust remover of approved
make with paint brush and removing loose particles after 24 hours of its
application with wire brush and thoroughly washing with water and allowing
it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm
diameter | - | mtr | - | - |
| 1.08 | odFinishing with Epoxy paint (2 or more coats) at all locations prepared and applied as
per
manufacture specification including appropriate priming coat, preparation of surface
etc. complete (on steel work) | - | mtr | - | - |
| 1.09 | 26.32.1Providing, mixing and applying SBR polymer (of approved make) modified
Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with
polymer minimum 2% by wt. of cement used) as per specifications and
directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be
done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface
has been satisfactorily evaluated by sounding / tapping with a blunt metal
instrument and/or the 75mm size cube crushing strength at the end of 28 days
to be not less than 30 N/Sqmm2).12 mm average thickness | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1448991.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
epaymentform.pdf
Tender Documents • 0.17 MB
generalcondition.pdf
Tender Documents • 1.01 MB
sbdfinal.pdf
Tender Documents • 1.20 MB
listofmaterialsnew.pdf
Tender Documents • 0.23 MB
BOQ_1448991.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .