PROVN OF STORAGE SHED CUM SAMPLE ROOM AT HQ CWE DEHRADUN

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 Type D-2 (40 mm graded crushed stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

M & L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat finished surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B1 (nominal mix) using (20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement 1:6 complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

M & L for removing excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M & L for rendering 15 mm thick on surface other than fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and fair (without using extra cement) complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

Surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for forming embankments including raising (or lowering) earth filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate complete all as specified and directed.

M&L for 50mm thick cement concrete in 1:2:4, type B-1, using 20mm graded stone aggregate complete all as specified and directed.

M&L for 38mm glass dividing strips, 3mm thick, inserted in position, confirm to design complete all as specified and directed.

M&L for 18 to 20 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm screed bed in CM 1:4 complete all as specified including moulding complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C-1 as in plinth protection, finished even and fair including joints and filling bitumen sand mixer (1:3) complete all as specified and directed.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F 5 to 10 mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm long and nexc 15cm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed.

S&F Pressed steel frames of size 125x60 mm made of CR sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. Note: cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame shall deemed included in the quoted cost.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, designer, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete including one shop coat at zink chromate primer paint all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete including one shop coat at zink chromate primer paint complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 100 mm size powder coated mild steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

M&L for preparation of already primed steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F 300 mm long MS sliding door bolts, plate type stove enameled black, with bright bolt not less than 12 mm dia with and including min of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150 mm size of pressed handle, oval type, stove enameled black complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. With ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; wall ways railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for point wiring complete with 3 runs (P + N+ Earth) of PVC insulated, unsheathed, FRLS, 1100 volt grade, size 1.5 sqmm, multi stranded, copper conductor single core in and including rigid concealed PVC Conduit . not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and earth wire connected to earth dolly complete all as specified, required for One light/fan point controlled by one switch, complete all as specified and directed.

All as per item No 37 here in before, but for One three pin 5 Amp socket on same board with other switches.

All as per item No 37 here in before, but for One three pin 5 Amp socket on independent board.

All as per item No 37 here in before, but wiring with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15-amp socket on independent board

S&F ceiling rose surface Bakelite 3 terminals of size 65x25mm. complete all as specified and directed.

S&F switch piano flush type single pole, 5 Amps, one way complete all as specified and directed.

S&F switch piano flush type single pole, 15/20 Amps, one way complete all as specified and directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep (Heavy Duty) with louver including and connected accessories including provision of flexible copper wire from ceiling rose to fan complete all as specified and directed.

S&F LED flood light 100 or higher watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp., fixed on pole duly fixed on angle iron bracket complete all as specified and directed.

S&F sheet metal enclosures TPN 415 Volt 4 way with suitable rated bus bar for Single door IP-43DB’s complete all as specified and directed.

S&F MCB SP 240-volt 10 KA 5 to 40 Amp, conforming to relevant IS complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified and directed.

S&F MCB TPN 415 Volt 10 KA 63 Amp conforming to IS complete all as specified and directed.

M&L for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core, PVC insulated, unsheathed, multi stranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note: -3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one-unit length.

All as per item No 52 but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor. Note: -3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one-unit length.

All as per item No 52 but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor. Note: -3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

S&F Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connecting to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (0.5 metre beyond pit to main switch), PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed.

Supply, laying, connecting and testing in replacement of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of of size 50 Sqmm 3½ core complete all as specified and as directed. Note: - Contractor shall submit the test certificates to GE.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete all as specified and directed. Note: - Only punned down sand thickness 18CM shall be measured and paid separately.

Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

Cutting existing road/hardstand of any type by using crow bar chisel up to a depth of 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed

M&L for GI tubing medium grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 50mm dia complete all as specified and as directed.

M/s Pradeep Kumar

V S ENTERPRISES

R K BUILDERS

G S CONSTRUCTIONS

M/s RAM RATAN AND SONS

M/s RP AGRAWAL

TANUJ SAINI CONTRACTOR

M/S J J ENTERPRISES