Construction of Nagarpalika Library at Bagasara, Dist. Amreli (2nd Attempt)

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Clearing and grubbing road land including uprooting rank Twenty Eight

vegetation grass bushes,shrubs,sapling and trees girth up to

Thousand Four

mm removal of stumps of trees cut earlier and disposal of

1 0.10 28,455.09 Hundred Fifty

unserviceable materials (C) By mechanical means in area of light

Five Rupees

Nine Paise

Excavation for foundation upto 1.5 m depth including sorting out One Hundred

and stacking of useful materials and disposing off the excavated Fifty Seven

2 stuff upto 50 Meter lead.(B) Dense or Hard soil Cmt 530.10 157.16

Rupees Fifteen

Excavation for foundation for depth from 1.5 m to 3.0 m including Two Hundred

sorting out and stacking of useful materials and disposing off the Ninety Rupees

3 excavated stuff upto 50 Meter lead.(C) Hard Murrum Cmt 169.70 290.24

Twenty Four

Filling in plinth and foundation with sand under floors Four Hundred

including watering ramming, consolidating and dressing Eighty One

complete Rupees Eighty

layers of 20cm. thickness including watering, ramming and One Rupees

consolidating etc. complete. (more than 10 ton)

Seventy Seven

Filling available excavated earth (excluding rock) in One Hundred

trenches. plinth, sides of foundations etc. in layers not Thirty Six

6 exceeding 20 cm. in depth consolidating each disposited Cmt 525.20 136.92

Rupees Ninety

layer by ramming and watering. One Paise

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is recommended

Fifty Nine

i.e one liter 20 EC chemical emulsion with 19 liter give 1 %

7 Smt. 276.20 59.46 Rupees Forty

concentration inclusive of one liter chemical emulsion application

Five Paise

at the rate of 5 Liter chemical/ Sqm of surface is recommended

as per I.S. (The Product performance shall carry Guarantee for

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Three Thousand

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

Eight Hundred

and curing complete excluding cost of formwork in (A) Foundation

8 Cmt 141.90 3,805.29 Five Rupees

and Plinth

Twenty Eight

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Four Thousand

Coarse sand : 6- crushed stone aggregates 20 mm nominal size) One Hundred

9 and curing complete including cost of formwork in (A) Wall Caps / Cmt 0.00 4,152.60 Fifty Two

Coping Rupees Sixty

GRADE SLAB (M200) : Providing and laying controlled cement

concrete M.200 Concrete with all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the Four Thousand

10 cost of formwork but excluding the cost of reinforcement for Cmt. 37.10 4,900.07 Nine Hundred

reinforced concrete work in M200 Grade Slab Rupees Six Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Four Thousand

with vibrator curing centering & shuttering in true line and level

Eight Hundred

etc, but excluding the cost of reinforcement for RCC work in

11 Cmt. 110.50 4,825.78 Twenty Five

Foundations footings, base of columns and Raft etc., for any type

Rupees Seventy

of cross section area complete as directed by E. I. C.

Eight Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Six Thousand

with vibrator curing centering & shuttering in true line and level

Eight Hundred

etc, but excluding the cost of reinforcement for RCC work in

12 Cmt. 11.00 6,888.20 Eighty Eight

column up to plinth lvl. etc., for any type of cross section area

Rupees Twenty

complete as directed by E. I. C.

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Six Thousand

etc, but excluding the cost of reinforcement for RCC work in TIE, Eight Hundred

GROUND, & PLINTH BEAMS for any type of cross sectional area. Seven Rupees

etc., complete as directed by E. I. C. Forty Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Seven Thousand

etc, but excluding the cost of reinforcement for RCC work in (F) Nine Hundred

14 Wall (Vertical and horizontal fins)., & (F1) Wall cap & coping up to Cmt. 28.50 7,956.78 Fifty Six Rupees

G.F. level., etc. Complete, as per detailed & directed by Architect / Seventy Eight

Consultant & and directed by EIC. Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Seven Thousand

etc, but excluding the cost of reinforcement for RCC work in (F) Nine Hundred

15 Wall (Vertical and horizontal fins)., & (F1) Wall cap & coping For Cmt. 2.50 7,998.39 Ninety Eight

First Floor level., etc. Complete, as per detailed & directed by Rupees Thirty

Architect / Consultant & and directed by EIC. Nine Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level

etc, but excluding the cost of reinforcement for RCC work in (F)

Eight Thousand

16 Wall (Vertical and horizontal fins) & (F1) Wall cap & coping For For Cmt. 0.20 8,040.00

Forty Rupees

Second Floor level., etc. Complete, as per detailed & directed by

Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Seven Thousand

with vibrator curing centering & shuttering in true line and level

Nine Hundred

etc, but excluding the cost of reinforcement for RCC work in (D)

17 Cmt. 17.50 7,942.44 Forty Two

For Columns for any type of cross sectional area for G.F. Lvl. etc.,

Rupees Forty

for any type of cross section area complete as directed by E. I. C.

Three Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Seven Thousand

with vibrator curing centering & shuttering in true line and level

Nine Hundred

etc, but excluding the cost of reinforcement for RCC work in (D)

18 Cmt. 15.60 7,984.05 Eighty Four

For Columns for any type of cross sectional area Work at First floor

Rupees Five

etc., for any type of cross section area complete as directed by E. I.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Eight Thousand

etc, but excluding the cost of reinforcement for RCC work in (D) Twenty Five

19 For Columns for any type of cross sectional area Work at Second Cmt. 5.30 8,025.66

Rupees Sixty Six

floor etc., for any type of cross section area complete as directed Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level

etc, but excluding the cost of reinforcement for RCC work in Seven Thousand

LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area Fifty Rupees

at G.F. Lvl. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Seven Thousand

etc, but excluding the cost of reinforcement for RCC work in Ninety One

LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area Rupees Sixty

at F.F. Lvl. etc., complete as directed by E. I. C. One Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Seven Thousand

with vibrator curing centering & shuttering in true line and level

One Hundred

etc, but excluding the cost of reinforcement for RCC work in

22 Cmt. 4.40 7,133.23 Thirty Three

LINTLE-BEAM, LINTEL & SILL & COPING for all cross sectional area

Rupees Twenty

at S.F. Lvl. etc., complete as directed by E. I. C.

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

including finishing the exposed surfaces with cement mortar 1:3 Seven Thousand

(1-cement, 3 Fine sand) to give a smooth and even surface Eighty Two

centering and formwork and curing complete excluding cost of Rupees Twenty

reinforcement. etc., complete as directed by E. I. C. Two Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level

etc, but excluding the cost of reinforcement for RCC work in SLAB Seven Thousand

BEAMS for Ground floor & Super structure, & for any type of cross Fifty Rupees

sectional area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

with vibrator curing centering & shuttering in true line and level Seven Thousand

etc, but excluding the cost of reinforcement for RCC work in SLAB Ninety One

BEAMS at First Floor & for any type of cross sectional area. etc., Rupees Sixty

complete as directed by E. I. C. One Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Seven Thousand

with vibrator curing centering & shuttering in true line and level

One Hundred

etc, but excluding the cost of reinforcement for RCC work in SLAB

26 Cmt 5.20 7,133.23 Thirty Three

BEAMS at Second Floor to Terrace Floor & for any type of cross

Rupees Twenty

sectional area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Six Thousand

with vibrator curing centering & shuttering in true line and level

Eight Hundred

etc, but excluding the cost of reinforcement for RCC work in

27 Cmt 13.20 6,825.08 Twenty Five

Staircase with steps / Kadi Tappa, waist slab and landing at any

Rupees Seven

height and level as directed etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting

Six Thousand

with vibrator curing centering & shuttering in true line and level

Eight Hundred

etc, but excluding the cost of reinforcement for RCC work at Plinth

28 Cmt 43.40 6,857.80 Fifty Seven

to Ground FLOOR SLAB for all thickness/cross section etc.

Rupees Seventy

complete as directed by E. I. C.

Nine Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting Six Thousand

with vibrator curing centering & shuttering in true line and level Eight Hundred

29 etc, but excluding the cost of reinforcement for RCC work at FIRST Cmt 33.40 6,899.31 Ninety Nine

FLOOR SLAB for all thickness/cross section etc. as directed by E. I. Rupees Thirty

C. One Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting Six Thousand

with vibrator curing centering & shuttering in true line and level Nine Hundred

30 etc, but excluding the cost of reinforcement for RCC work in Cmt 9.90 6,940.92 Forty Rupees

SECOND FLOOR SLAB for all thickness/cross section etc. complete Ninety Two

as directed by E. I. C. Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work

Seventy Seven

including bending, binding and placing in position complete upto

31 Kg 37297.00 77.29 Rupees Twenty

ground floor level

Eight Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto Seventy Eight

32 First floor level Kg 10883.00 78.34 Rupees Thirty

Three Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work

Seventy Nine

including bending, binding and placing in position complete for

33 Second floor to terrace floor Lvl. Kg 3813.00 79.39 Rupees Thirty

Eight Paise

Brick work using common burnt clay building bricks having

Four Thousand

crushing strength not less than 35 kg./Sq.Cm. in foundation and

Two Hundred

34 plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Cmt 42.70 4,214.33

Fourteen Rupees

Conventional

Thirty Two Paise

Brick work using common burnt clay building bricks having Four Thousand

crushing strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. Four Hundred

35 in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Cmt 76.80 4,496.05 Ninety Six

Ground Floor etc. Complete. Rupees Four

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Brick work using common burnt clay building bricks having Four Thousand

crushing strength not less than 35 kg./Sq.Cm. at First floor Lvl. in Five Hundred

36 cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Cmt 45.30 4,538.48 Thirty Eight

First Floor etc. Complete. Rupees Forty

Seven Paise

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. at Second floor to Four Thousand

terrace floor Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B) Five Hundred

37 Conventional For above First Floor to Terrace Floor etc. Complete, Cmt 31.60 4,580.91

Eighty Rupees

as per detailed & directed by EIC. Ninety Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar Six Hundred

38 1:4 (1- Cement : 4 -coarse sand ) (B) Conventional half brick

Eighty Four

masonry at Ground Floor level.(B) Conventional Rupees Twenty

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar Six Hundred

39 1:4 (1- Cement : 4 -coarse sand ) (B) Conventional half brick Smt 98.00 690.57 Ninety Rupees

masonry at First to Terrace Floor Lvl.(B) Conventional Fifty Six Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar Six Hundred

40 1:4 (1- Cement : 4 -coarse sand ) (B) Conventional half brick

Ninety Six

masonry at Terrace Floor Lvl.(B) Conventional Rupees Eighty

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at Three Hundred

any height with all labour & material, etc. Complete, as per Twenty Six

41 detailed & directed by EIC. Smt 223.30 326.13

Rupees Twelve

Providing 15mm thick cement plaster in single coat on Rough One Hundred

(Similar)side of single or half brick walls for interior plastering for Seventy Two

42 Ground floor level and finished even and smooth in (ii) Cement Smt 411.30 172.04

Rupees Four

mortar 1:4 (1-cement :4-sand) Paise

Providing 15mm thick cement plaster in single coat on Rough One Hundred

(Similar)side of single or half brick walls for interior plastering for Ninety Five

43 First floor level and finished even and smooth in (ii) Cement Smt 394.60 195.94

Rupees Ninety

mortar 1:4 (1-cement :4-sand) Four Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering at Two Hundred

44 Second Floor to Terrace floor level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand) Rupees Eighty

Three Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering for Ground Floor level One Hundred

45 and finished even and smooth in (ii) Cement mortar 1:4 (1- Smt 293.30 155.35 Fifty Five Rupees

cement :4-sand) Thirty Four Paise

Providing 10mm thick cement plaster in single coat on

One Hundred

brick/concrete Ceiling for interior plastering for First Floor level

Seventy Nine

46 and finished even and smooth in (ii) Cement mortar 1:4 (1- Smt 266.60 179.24

Rupees Twenty

cement :4-sand)

Four Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering at Second Floor to Two Hundred

47 terrace floor Lvl. and finished even and smooth in (ii) Cement Smt 51.20 203.14 Three Rupees

mortar 1:4 (1- cement :4-sand) Fourteen Paise

Providing and applying ready mix concrete plaster on RCC

elements to give expose finish including 2mm thick base coat of

same material and 3mm thick top coat of concrete platser of One Thousand

48 approved shade and brand. Job includes proper griding of RCC Smt 456.60 1,016.12 Sixteen Rupees

joints before applying plaster complete with scafolding directed as Twelve Paise

per Architect and EIC

Providing 20mm thick double coat external cement plaster on

brick/ concrete work for plastering comprising of base coat of

12mm thick cement plaster in cement mortar (1 Cement:4 coarse Two Hundred

sand) in rough finishing and 8mm thick top coat of cement mortar Eighty Three

1:2 (1 Cement: 2 Coarse sand) finished rough / with Trovel Rupees Ninety

including scaffolding curing etc. complete. Five Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Washed stone grit plaster on exterior walls height upto 10 metre

above ground level, in two layers, under layer 12 mm cement

plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer

with scratching tool, applying cement slurry on the under layer @

2 Kg of cement per square metre, top layer 15 mm cement plaster Nine Hundred

1:1/ 2:2(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm Ninety Five

50 nominal size), in panels with groove all around as per approved Smt 508.40 995.30

Rupees Thirty

pattern, including scrubbing and washing the top layer with Paise

brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C. Forty Three

51 projections. Rmt 551.90 43.05 Rupees Four

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and One Thousand

jointed with grey cement slurry mixed with pigment to match the Nineteen

shade of slab including rubbing and polishing etc. complete. (A) Rupees Thirty

25mm thick Nine Paise

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

One Thousand

mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray

One Hundred

53 cement slury mixed with pigment to match the shade of slab Smt 35.90 1,109.07

Nine Rupees

including rubbing

Seven Paise

and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

One Thousand

new surface or fixing on existing flooring by adhesive material

Four Hundred

including dismentaling of existing flooring and jointed with color

54 Smt 33.50 1,467.72 Sixty Seven

cement slurry including finised with flush pointing & cleaning the

Rupees Seventy

surface etc. complete for antiskit.

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x One Thousand

24" or as specified in skirting risers of steps and dedo on 10mm One Hundred

55 thick. cement plaster 1:3 (1-cement: 3-coarse sand) and jointed Smt 250.90 1,195.02 Ninety Five

with white cement slurry as per the detailed by Architect & Rupees Two

direction of Engineer-in- Charge. Paise

Providing and laying Ceramic tiles 6mm thick in flooring, treads of

steps and landing laid on a bed of 12mm thick Water proof

cement plaster with mortar 1:3 (1-cement : 3- coarse sand ) & One Thousand

Water Proofing Chemical Agent and cement vata (10cm. x 10 cm. Two Hundred

56 size) quarter round in cement mortar 1:1 including neat cement Smt 34.00 1,219.58 Nineteen

finishing, watering etc. complete finishing with flush pointing in Rupees Fifty

white cement. (For UG tank flooring) Seven Paise

Providing and laying Ceramic tiles 6mm thick in skrting, risers of

steps and dedo on 10mm thick Water proof cement plaster with One Thousand

mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Two Hundred

57 Chemical Agent and finishing with flush pointing in white cement. Smt 99.00 1,217.30 Seventeen

(For UG Tank walls) Rupees Thirty

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished,

machine cut Granite of any colour and shade, & finish, as per

detailed by architect / Consultantfor flooring, dado skirting,

cladding, steps and risers, kitchen platforms, vanity counters,

window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar

1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting Three Thousand

58 on In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof

Four Hundred

cement : 4 coarse sand), joints treated with white cement, mixed Rupees Twenty

with matching pigment, epoxy touch ups, including Spacer tape Six Paise

6.4 mm thick x 4 TO 6 mm as per detailed groove, rubbing,

curing, moulding and polishing to edges to give high gloss finish

as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse

One Thousand

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

59 Smt 106.00 1,090.70 Ninety Rupees

including rubbing and polishing etc. complete. (B) 30mm thick.

Sixty Nine Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and fixing sandwich type platform including supplying

and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick Seven Thousand

polished kota stone platform fixing in top and sides and Four Hundred

60 intermediates supports fixing with cement mortar and adhesive Smt 3.00 7,478.49 Seventy Eight

and finishing including making recess for Kitchen/ Laboratory Rupees Forty

sink etc. complete as approved and directed by Consultant / EIC. Nine Paise

Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

Seven Hundred

bring mortar creme out upto surface using white cement including

Seventy Nine

61 rounding off junctions and extending them upto 15 cm along the Smt 275.30 779.70

Rupees Sixty

wall,clearing with water and oxalic acid etc. as directed. (The

Nine Paise

Product performance shall carry Guarantee for 10 years)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

Three Hundred

coarsesand: 4-graded stone aggregate 20mm nominal size) laid in

Thirty Nine

62 one layer and finished with a floating coat of neat cement. (B) Smt 29.30 339.08

Rupees Seven

50mm thick.

Providing wood work in frames of Size 12.5 x 10 Cm. for doors,

windows, clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash fasteners of

required dia & length Incl. Providing and fixing 35 mm thick (or

as specified) ISI marked flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block board construction with

frame of 1st class hard wood, with 1mm. thk, ISI marked designed

laminate in any finish on both faces of shutters., slit openings with Six Thousand

bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel Seven Hundred

63 butt hinges [125x65x2.5mm. IS1281712] with necessary screws, Smt 41.20 6,771.29 Seventy One

using branded S.S. matt /glossy / platinum finished accessories, Rupees Twenty

Colour / polishing all bidding parts, and also incl. with all Nine Paise

Material, labour, tools, tolerance, scaffolding etc. complete as per

concept /direction and approved by Architect, and directed by

Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/

Openable window/door with Required thick toughened designer

glass of Saint Gobain or equielent, is used for Aluminum Hi-Profile

Section with necessary accessories and with additional shutter

with Stainless Steel Mosquito net. [In Opening Position always one

of Mosquito net shouter should be in Close Position], captive bead,

extremely difficult to remove once glazed, high performance

weather stripping, internal wedge gasket, Bottom, side and top

section including necessary filling up the gaps at junctions, with

required EPDM rubber/ etc. and ISI ebco make,"Lx. Premium" Seven Thousand

Required Finish door fixture Accessories As per Architect Concept, Seven Hundred

64 High security interlocking bead, Sheet membrane flashing , 2" over Smt 112.40 7,742.61 Forty Two

jamb flashing, New Blocking with new backer rod and sealant, Rupees Sixty

channel glide with runner, slide fold hinge when ever need of Paise

sufficient capacity, with warranty, all types of material, labour,

transportation, tools tolerance and matching required level with

Flooring etc. complete as per Architect concept and as per

detailed by Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of One Thousand

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour One Hundred

65 anodized alluminium frame for ventilation with 5 mm thick frosted Smt 4.50 1,175.56 Seventy Five

glass as details etc complete for Ventilation Rupees Fifty Five

Providing and fixing hydraulic door closer of approved size and Six Hundred

make as directed engineer in charge. all lift, level and leads. Thirty Nine

Rupees Ten

Providing & Fixing M.S. grills of required pattern to wooden frames

of windows, RCC or as specified in drawings etc. with M.S. flats at One Hundred Six

67 required spacing & frame around, square or round bars with round Kg 4525.00 106.23 Rupees Twenty

headed bolts & nuts or by screws (A) Plain Grill, as per detailed & Three Paise

directed by EIC.

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing, supplying, fixing, fabricating, erecting, aligning the

structural steel like pivot ,tubular 'T', 'I" section, angle, plate,

beam, channel section, Bar , hollow box or Z purloins, Round or

Square Pipes, of approved make, for built up purloins, roof

trusses, columns, side runners, tie beams, sag rods, base plates

gusset plates, cap plates, bearing bracing, gantry girders, rails,

require support, pipes, including all welded or bolted steel

structures of various types with approved I.S.I. mark electrodes,

bolts, anchor bolts including cost of thread, Anchor plate cleats

etc. in RCC or masonry work, including cutting, bending, welding

,fixing, supplying , Fabricating Decorative fevisted section or any One Hundred

structured member required to complete the job for Bridge, Thirty One

68 Trusses, Canopy, doors, Frame, Railing, Entrance gate, pergola, Kg 1756.00 131.83

Rupees Eighty

Decorative hanging light , New window, parking shed or space Two Paise

frame or any other required specified area as shown on drawing

and detailed specification or as per design incl. three coats of

approved brand primer and two coats of paints, necessary

scaffolding, tools tolerance etc. complete as directed by Engineer

In Charge. (payment will be made for weight of metal used in the

Finishing wall with Weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after One Hundred

69 thoroughly brushing the surface to remove all dirt, and remains of Smt 793.80 120.26 Twenty Rupees

loose powdered materials.etc complete. Twenty Six Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two

coats of primer at Wall painting (two coats) with plastic emulsion

paint of approved brand & manufacture on undecorated wall One Hundred

surfaces to give an even shade including thoroughly brushing the Twenty Three

surface free from mortar droppings & other foreign matter & sand Rupees Forty

papered smooth, as per detailed & directed by EIC. Four Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two

coats of primer at Ceiling painting (Two coats) with plastic

emulsion paint of approved brand and manufacture on One Hundred

undecorated Ceiling surface to give an even shade including Twenty Eight

thoroughly brushing the surface free from mortar droppings and Rupees Ninety

other foreign matter and sand papered smooth, as per detailed & Six Paise

directed by EIC.

Painting two coats (including priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even One Hundred

72 shade including cleaning the surface an even shade including

Twenty Eight

cleanicn the surface of all dirt, dust and other foreign matter. Rupees Ninety

Four Paise

Providing and fixing roof panel shall be made out of 0.5 mm thick

pre coated GI sheet . The Precoated sheet shall be of minimum

240 mpa steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and polyester top

Eight Hundred

coat 15-18 micron. The PPGI Sheet shall have plastic protective

Sixty Seven

73 guard film of minimum 25 microns to avoid scratches during Smt 10.00 867.39

Rupees Thirty

transportation. The ridge shall be fixed to the steel members by

Eight Paise

pop rivet or self drilling/self stitching fastners @ maximum

mm c/c along length of capping/flashing etc complete .

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge,

nos. 16mm dia SS pipe of 16 gauge, round balustrade of 32mm

[50mm 16G Grade 304 with glossy finish consisting of 32 NB or

nearest size vertical posts 900 Height at maximum spacing 900c/c

with suitable cups at bottom and top rail of 50 NB or nearest size

& intermediate rails of 16 NB or nearest size etc complete] with

complete assembly of SS studs to house the horizontal 16mm

pipes and top handrail, bend and coupler to be used as per Three Thousand

architectural detail drawings for the railing in parapet, stair etc. Six Hundred

74 including fabricating, hoisting, fixing in position with angle cleats, Rmt 51.80 3,646.91

Forty Six Rupees

holdfast etc. in RCC or masonry in true line level and plumb, Ninety Paise

including complete assembly, including matt polishing and

buffing complete, including scaffolding etc. complete as directed

by EIC.(Actual length of stair railing shall be measured at site &

same shall be paid. No wastage should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF

AISI-304 grade using 50mm dia Stainless Steel pipe of 16 gauge,

[top rail of 50 NB or nearest size complete] with complete

assembly, bend and coupler to be used as per architectural detail

drawings for the railing in parapet, stair etc. including fabricating,

hoisting, fixing in position with angle cleats, holdfast etc. in RCC One Thousand

75 or masonry in true line level and plumb, including complete Rmt

Three Hundred

assembly, including matt polishing and buffing complete, Fifty Six Rupees

including scaffolding etc. complete as directed by EIC.(Actual Seventeen Paise

length of stair railing shall be measured at site & same shall be

paid. No wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic

Grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x

75 x 6mm. Descaling and degreasing the board as per

requirement using epoxy reflactive process by screen painting as

directed etc. complete including transporting and fixing in C.C.

1:2:4 with necessary excavation curing etc. complete as per I.R.C. Seven Thousand

76 67-2012 design. A warranty for 7 years for the Retro reflective Smt.

Six Hundred Ten

sheeting from original manufacturer & a certified copy of 3 year Rupees Sixty Six

outdoor exposure test report from third party test lab for the Paise

product offered shall be submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane

elastomer waterproof membrane over uniform surface of slab.

Apply 2 coats at dosage of 1.5 kgs per sq.m to achieve the

required minimum DFT of 1.5mm. It should have following

properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700% Nine Hundred

4. Dosage 1.2 - 1.5 kg/m2 in two coats Seventy Nine

5. Tack Free Time 24 - 48 hrs Rupees Fourteen

6. Tensile Strength N/mm² ≥ 2.2 Paise

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Seven Hundred

Confirming to IS 15658 : 2006 including 35 mm Sand layer for Six Rupees

levelling and filling the joint with sand in proper line and level as Ninety Two

per guidlines of IRC SP 63-2018 etc. Complete Paise

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length, 30cm height and 15cm thick

of M200 grade concret as per approved design and including Four Hundred

79 excavation for fixing in proper line and level, filling the joint with Rmt 40.00 402.55 Two Rupees

C:M 1:3 (1 cement:3 fine sand) etc complete. Fifty Four Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: 1:2:4

Cement Concrete laid in required slope at concrete floor as

directed and specified using necessary steel form work with M.S.

Channels including forming construction & contraction joints

mm to 6mm wide by cutting the floor up to ¼ th depth of

thickness of the concrete depth using mechanical saw and sealing

the joint with poly sulphide sealant up to full depth of cutting

including providing & fixing M.S. dowels bars with bitumen Seven Thousand

painted of full length as shown in drawing as to form the bays Three Hundred

80 not exceeding 6.0 m X 4.5 m etc. complete as per directed by Cmt 0.00 7,346.39 Forty Six Rupees

Architect or Engineer-In-Charge. For all level and leads.(a) For Thirty Eight

RCC Road Note: Rates are Incl. cost of Cement Concrete Pavement Paise

shall be 150mm. Thk. or as detailed and rolling 2 times as per

mentioned above and also all tools tolerance, shuttering, channel,

etc. complete as per detailed & Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C.

SWR type B pipe confirming to IS 13592-1992 with one end plain

& other end socket with rubbering & Fixing conforming to ISI

14735-1999 of approved make for drain system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall

be fixed on wall using PVC clamps of the size 160mm dia x Eight Hundred

210mm length x 196mm high at every 2000mm centre to centre Seventy Six

81 or shall be concealed in wall as directed necessary fittings such as Rmt. 57.50 876.90

Rupees Ninety

bends, shoes, etc. incl. testing of pipe & joint & jointed with Paise

adhesive solvent, cement incl. cost of all material etc. complete as

per detailed, directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 Twenty Four

RPM as per IS 9079 at departmental stores with following MOC: Thousand Two

82 Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m Nos 1.00 24,240.00

Hundred Forty

head Rupees

Control panel- DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB, overload relay and Six Thousand

contactors as per Type II coordination including digital voltmeter, Nine Hundred

protective relays & control accessories. Rupees Twenty

Four Paise

Providing laying and jointing in true line and level 75mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall Two Hundred

with the help of clamp at every two metre C/C or shall be Eighty Rupees

concealed as directed including necessary fittings etc. including Twenty Three

testing of pipe and joints and fixing the same with adhesive Paise

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

Seventy Two

with the help of clamp at every two metre C/C or shall be

85 Rmt. 37.50 72.65 Rupees Sixty

concealed as directed including necessary fittings etc. including

Four Paise

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

Ninety One

with the help of clamp at every two metre C/C or shall be

86 Rmt. 41.00 91.84 Rupees Eighty

concealed as directed including necessary fittings etc. including

Three Paise

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall One Hundred

with the help of clamp at every two metre C/C or shall be Forty Eight

concealed as directed including necessary fittings etc. including Rupees Eleven

testing of pipe and joints and fixing the same with adhesive Paise

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall One Hundred

with the help of clamp at every two metre C/C or shall be Ninety Five

concealed as directed including necessary fittings etc. including Rupees Sixty Six

testing of pipe and joints and fixing the same with adhesive Paise

solvent, including cost of all materials.

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing & Fixing gun metal check or no return full way wheel

Four Hundred

valve etc. complete as per the instruction of EIC. (C) 25 mm. Dia

89 Each 10.00 420.63 Twenty Rupees

Sixty Three Paise

Providing & Fixing gun metal check or no return full way wheel Six Hundred

valve etc. complete as per the instruction of EIC. (E) 40 mm. Dia Sixty Three

Rupees Forty

Providing and fixing screw down bib taps of following size.(A) Two Hundred

Brass screw down bib tap polished bright. (i) 15mm dia.

91 Each 8.00 214.81 Fourteen Rupees

Eighty Paise

Providing and fixing brass screw down stop tap.(B) 20mm dia. Two Hundred

Twenty Three

Rupees Eighty

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and connection Three Rupees

93 etc. complete on terrace Liter 8000.00 3.95 Ninety Four

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain-

100mm diameter with 150 mm X 150mm S.S.jali for floor or nahni

Five Hundred

trap of the following nominal diameter of self cleansing design

Eighty Six

94 with C.I screed down or hinged grating including the cost of Each 14.00 586.27

Rupees Twenty

cutting & making good the walls, as per detailed, directed &

Seven Paise

approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

One Thousand

chamber and water tight C.I. cover with frame of 300mm x

Two Hundred

300mm size (inside) with standard weight.(i) Square mouth traps.

95 Each 8.00 1,292.19 Ninety Two

(A) 100mm x 100mm size P type.

Nineteen Paise

Constructing brick masonry chamber for underground C.I.

Inspection chamber & bends with bricks having crushing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm internal dimensions, total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse Two Thousand

sand :4-graded stone aggregate 20mm size) foundation concrete Nine Hundred

96 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished Each 6.00 2,932.93 Thirty Two

smooth with a floating coat of neat cement on walls & bed Rupees Ninety

concrete for (i) Inside dimensions 455mmx 610mm & 450mm Two Paise

deep for single pipe line. etc. complete as per detailed, directed &

approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4

mix ( 1 cement : 2 coarse sand :4 grade stone aggregate 20mm

size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6

brick bats 40 mm size ) inside plaster 15mm thick with CM 1:5 (

cement : 5 Coarse sand ) finished with a floating coat of neat

cement & making channels in cement 1:2:4 mix ( 1 cement :

coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x Nineteen

1200 mm & 1.5 m deep including R.c.c. cover with frame size 560 Thousand Three

97 mm diameter ( A ) with 230mm thick walls of brick masonry using Each 6.00 19,349.63 Hundred Forty

brick having crushing strength not less then 35 kg/sqcm in CM 1 : Nine Rupees

5 ( 1 cement : 5 coarse sand ), (2) B type depth 1.50 Meter for Sixty Three Paise

150mm diameter sewer.. etc. complete as per detailed, directed &

approved by the consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for

Sewerage including excavation with any strata up to four meter One Hundred

depth,PCC in Bottom Slab 1:3:6,Brick Work in cement mortar 1:5, Thirty Six

RCC M200 Slab on Top And bottom, required filling for Tank Thousand Two

98 including making Required line for water inlet, precast RCC M.200 Each 1.00 1,36,221.73 Hundred Twenty

Frame & cover etc.as directed by engineer in charge. etc complete, One Rupees

septic tank as per detailed drawing. Seventy Three

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing & Laying & jointing in true line level U.P.V.C. SWR type B

pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall

using PVC clamps of the size 160mm dia x 210mm length x

196mm high at every 2000mm centre to centre or shall be Eight Hundred

concealed in wall as directed necessary fittings such as bends, Thirty Four

shoes, etc. incl. testing of pipe & joint & jointed with adhesive Rupees Thirty

solvent, cement incl. cost of all material etc. complete as per Eight Paise

detailed, directed & approved by the consultant / EIC. (A) 160mm

dia. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the Four Hundred

100 following internal diameter with collars and butt ends prepared for Rmt.

Thirty Four

collar joints including testing of joints complete.(D) 300mm Rupees Twenty

Seven Paise

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth

internal clear dimention including the cost of excavation, P.C.C.

Thirty Five

1:4:8 and filling brickbats with dry masonry work, Honeycomb

Thousand One

masonary work, M:20 RCC. SLab incl. form work including FE-500

Hundred Thirty

101 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 Each 1.00 35,135.88

Five Rupees

with finishing curing etc. complete as directed.. etc. complete as

Eighty Eight

per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over

Counter wash basin with single hole for pillar type with Cl or MS

brackets painted white including cutting holes, ranking bolts for

Fixing & marking good the same, including Fixing C.P. Brass waste

coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle

Trap, as approved, capstan head C.P. screwed down high pressure Two Thousand

with screw shank & back nuts & rubber plugs, 15mm dia brass Seven Hundred

102 stop cock (50/75mm p.v.c. Drain connection pipe, Water Each 5.00 2,742.86 Forty Two

Connection Pipe of required Size, & testing the same for leak Rupees Eighty

proof, etc. with all material & labours to complete this job in all Five Paise

respected manners, etc. complete as per detailed & approved by

the consultant & directed by EIC.

Providing and fixing wash down water closet (European type,Wall

hung W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand)

with plastic seat and cover for wash down water closer with C.P. Seven Thousand

103 brass hinges, C.P. brass toilet paper holder, Jet Spray, Metropole Each 4.00 7,001.62 One Rupees

flush valve Incl. Connection and rubber buffers. (A) Vitreous Sixty Two Paise

China., etc. complete as per detailed & approved by the consultant

& directed by EIC.

Providing and fixing water closet squatting Pan including trap and One Thousand

foot rest (Indian type W.C. Pan) size 580mm (Earthwork, bed Four Hundred

104 concrete to be measured and paid for separately) (A) Vitreous Each 1.00 1,436.33 Thirty Six

China.(I) Long pattern = White colour Rupees Thirty

Three Paise

Providing and fixing Urinal or approved quality including One Thousand

conecting the Urinal with waste pipe , tap etc. complete.(A) White Seventy Four

105 earthenware flat back or corner type size 430mm x 260mm x Each 3.00 1,074.86

Rupees Eighty

350mm. Six Paise

Providing & Fixing C.P. brass towel rail Approved Make complete

with C.P. Brass brackets fixed to wooden plugs with C.P. Brass

screws,, etc. complete as per detailed, directed & approved by the

Six Hundred

consultant / EIC. (B) 600mm x 20 mm size, etc. with all material &

106 Each 5.00 616.42 Sixteen Rupees

labours to complete this job in all respected manners, etc.

Forty Two Paise

complete as per detailed & approved by the consultant & directed

Providing & Fixing 600mm x 450mm beveled edge mirror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

Eight Hundred

& Fixing to wooden plugs with C.P. brass screws & washers, etc.

Fifty Nine

107 with all material & labours to complete this job in all respected Each 5.00 859.41

Rupees Forty

manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing & Fixing handicap toilet set with Wall-mounted

European Closet & wash basin & all handicap requirement with

dual flush tank, seat & lead (heavy duty) including C.I. Brackets,

C.P. brass hinges, M.S. / C.I. painted brackets, Waste Coupling,

32mm size bottle trap etc. all Internal fittings complete with grab

rails, swin type grab bar etc. rubber buffers, C.P nuts, bolts etc

Forty Thousand

making holes in walls & floors, & finishing for ready to use. The

Four Hundred

rate includes all necessary connection charges as per product

108 detail to the satisfaction of Architect / engr. in-charge where Each 1.00 40,425.96 Twenty Five

Rupees Ninety

required & the final handing over etc. complete as per

Five Paise

specifications, drawings & as directed by the Engineer-in-charge.

The scope includes Providing and fixing all the necessary fittings

of approved brand and as per directed by Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with Three Hundred

screws, shanks & back nuts. (i) 15mm dia. Eight Rupees

Seventy Two

Providing & Fixing brass screw down stop tap. (A) 15mm dia.

Two Hundred

110 Each 6.00 205.83 Five Rupees

Eighty Two Paise

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. Two Thousand

brackets, painted white including cutting holes in walls and Three Hundred

111 making good the same but excluding fittings. Each 0.00 2,326.66 Twenty Six

Rupees Sixty

Five Paise

Providing and Fixing Pipe Hanger on Ceilling for Dutile type

Seven Hundred

112 Ceilling Piping Work as Per Directed By Engineer In Charge Each 10.00 707.00

Seven Rupees

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for

passing One Thousand

drain pipe etc. and repairing the hole after insertion of drain pipe One Hundred

113 etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Each 20.00 1,161.50 Sixty One

graded stone aggregate 20 mm nominal size), including finishing Rupees Fifty

complete so as to make it leak proof. Paise

Point wiring in Copper (Modular) Point wiring for Light / Bell with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on

Four Hundred

PVC / Metallic box, single mounting base frame covered with

Eighty Five

114 textured/metallic front plate modules erected on / in wall / Pt. 53.00 485.81

Rupees Eighty

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall/ceiling,

complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC box

One Hundred

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open

Sixty Seven

115 / concealed wiring. with necessary Lamp holder / ceiling rose / Pt. 78.00 167.66

H.D.Connector as directed. Rupees Sixty Six

Note:- Maximum up to 6 mtrs length, excess will be considered as Paise

Mains for Secondary Point. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic

fan regulator with separately mounted and accessories with earth

Six Hundred

continuity of following type erected on PVC / Metallic box, single

Seventy Four

116 mounting base frame covered with textured/metallic front plate Pt. 33.00 674.68

Rupees Sixty

modules erected on / in wall / ceiling as per pipe erected. with

Eight Paise

necessary ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered

with appropriate front plate modules erected on / in wall / ceiling Five Hundred

117 as per pipe erected with following type of accessories. Pt. 40.00 510.05 Ten Rupees Five

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire Paise

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered Seven Hundred

with appropriate front plate modules erected on / in wall / ceiling Forty Five

118 as per pipe erected with following type of accessories. Pt. 4.00 745.38

Rupees Thirty

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Eight Paise

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered

with appropriate front plate modules erected on / in wall / ceiling Nine Hundred

119 as per pipe erected with following type of accessories. Pt. 6.00 915.06 Fifteen Rupees

[III] For 16A Plug with 2-4 sq.mm Cu. Wire Six Paise

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / Two Hundred

in wall / ceiling with following type accessories. Fifty Seven

Single mounting base-frame & Textured / Metallic front plates. Rupees Fifty Five

Cat-III Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall/ceiling

,complete with 6A Modular type switches and following type of

accessories erected on PVC / Metallic box, single mounting base Six Hundred

frame covered with textured / metallic front plate modules erected Three Rupees

on / in wall / ceiling as per pipe erected. with necessary

Ninety Eight

batten/angle holder or ceiling rose or H.D.Connector as directed. Paise

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted

with pvc / metallic box, single mounting base frame covered with

Twenty Five

textured / metallic front plate , modules erected with necessary

122 Ea. 20.00 25.25 Rupees Twenty

connection. As desired by Engineer In charge

Five Paise

(7) Blank Plate Single Cat-III

Seventy One

Decorative call bell Ting-tong box type 250 volts complete erected

123 Ea. 1.00 71.71 Rupees Seventy

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules One Hundred

124 erected with necessary connections as per site situation directed Ea. 11.00 160.59 Sixty Rupees

by Engineer In charge. Fifty Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected Thirty Three

125 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 500.00 33.33 Rupees Thirty

solution & Clamps with following dia of pipes, in approved manner Three Paise

as directed b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected Sixty Seven

126 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 40.00 67.67 Rupees Sixty

solution & Clamps with following dia of pipes, in approved manner Seven Paise

as directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with Twenty One

127 required nos. of coupling, PVC bushes, Check-nuts etc. complete Mtr. 200.00 21.21 Rupees Twenty

of following sizes. (2) 25 mm

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free & Two Hundred

128 flame proof confirming BS .All necessary accessories and Mtr.

Seventy Seven

measuring of following sizes. (1) 75 mm x 50 mm trunking Rupees Seventy

Five Paise

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free & One Hundred

129 flame proof confirming BS .All necessary accessories and Mtr.

Eighty Eight

measuring of following sizes. (3) 50 mm x 50 mm trunking Rupees Eighty

Seven Paise

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

130 earth continuity of following size (general wiring + in street light) Mtr. 600.00 62.62 Rupees Sixty

(a) with medium class Rigid PVC pipe and accessories Two Paise

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for Eighty Two

131 earth continuity of following size (general wiring + in street light) Mtr. 1200.00 82.82 Rupees Eighty

(a) with medium class Rigid PVC pipe and accessories Two Paise

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC One Hundred

132 insulated stranded wire of green colour for earth continuity of Mtr. 250.00 112.11 Twelve Rupees

following size (FRLS) (a) with medium class Rigid PVC pipe and Eleven Paise

accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Two Hundred

133 with necessary clamps or in existing trench / pipe of following Mtr.

Eighty Four

size of cables Rupees Eighty

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Two Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Two Hundred

134 necessary clamps or in existing trench / pipe at road crossing or Mtr.

Eighty Seven

floor of following size of cable. (B) 3 core 4 Sq. mm Rupees Eighty

Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Three Hundred

135 wall with necessary clamps or in existing trench / pipe at road Mtr.

Sixty Four

crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Rupees Sixty

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on Five Hundred

136 wall with necessary clamps or in existing trench / pipe at road Mtr. 300.00 510.05 Ten Rupees Five

crossing or floor of following size of cables. (C) 4 core 6 Sq. mm Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall Six Hundred

137 with necessary clamps or in existing trench / pipe at road Mtr.

Seventy Six

crossing or floor of following size of cables. (A) 4 core 10 Sq. mm Rupees Seventy

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be Forty Six Rupees

138 erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Mtr. 250.00 46.46

Forty Six Paise

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with Thirty Three

139 out going tails, insulating tape etc for following size of cables. Ea. 8.00 33.33 Rupees Thirty

(A) 2 to 4 core 2.5 / 4 Sq. mm Three Paise

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with Thirty Eight

140 out going tails, insulating tape etc for following size of cables. Ea. 6.00 38.38 Rupees Thirty

(B) 2 to 4 core 6 Sq. mm Eight Paise

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with Thirty Eight

141 out going tails, insulating tape etc for following size of cables. Ea. 4.00 38.38 Rupees Thirty

(C) 2 to 4 core 10 Sq. mm Eight Paise

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated Seventy Five

142 armoured cable complete with out going tails, insulating tape etc Ea. 2.00 75.75 Rupees Seventy

for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Five Paise

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

143 pressure tool & connected to switchgear terminals with

Fifteen Rupees

brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Fifteen Paise

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

144 pressure tool & connected to switchgear terminals with

Twenty Rupees

brass/cadmium plated nut bolts in an approved manner. (D) Twenty Paise

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

145 & connected to switchgear terminals with brass/cadmium plated

Eight Rupees

nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm Eight Paise

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

146 & connected to switchgear terminals with brass/cadmium plated

Ten Rupees Ten

nut bolts in an approved manner. (B) 10 Sq.mm Paise

Making trench in soft soil of suitable width of 90 cms deep for

laying cable or locating the fault all over the run and backfilling Fifty Five Rupees

147 the same and making the surface as normal ground. Mtr. 200.00 55.55

Fifty Five Paise

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required Sixty Two

148 depth for laying of cable. below ground / road surface for Mtr. 160.00 62.62 Rupees Sixty

enclosing cable and back filling the same to make ground as per Two Paise

original. (A)50 mm dia

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required Ninety Five

149 depth for laying of cable. below ground / road surface for Mtr. 180.00 95.95 Rupees Ninety

enclosing cable and back filling the same to make ground as per Five Paise

original. (C)90 mm dia

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

Six Thousand

V,having normal current rating up to 25 A to 100A. with Fixed

One Hundred

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

150 Ea. 1.00 6,173.12 Seventy Three

with all internal connections, spreader tinned copper & complete

Rupees Twelve

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking One Hundred

151 capacity 10 KA to be erected in existing box. confirming to IS Ea. 93.00 112.11 Twelve Rupees

8828/1996 with ISI Mark - Cat III Eleven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Six Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS Sixty Eight

152 :8828 in existing box having following capacity (b)40 Amp. Ea. 4.00 668.62

Rupees Sixty

Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Five Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS Eighty Seven

153 :8828 in existing box having following capacity (a) 6 to 32 Amp. Ea. 2.00 587.82

Rupees Eighty

Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Six Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS Forty Seven

154 :8828 in existing box having following capacity (b)40 Amp. Ea. 7.00 647.41

Rupees Forty

Cat.III One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & One Thousand

3 without MCB to house appropriate nos. of MCBs.(The DBs should One Hundred

155 be used of same company of MCB to be used) suitable for (A) Ea. 2.00 1,152.41 Fifty Two

single phase incoming and horizontal single phase outgoing (b) Rupees Forty

sheet steel double door (IP-43) (iii)8 way One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

3 without MCB to house appropriate nos. of MCBs.(The DBs should Two Thousand

Nine Hundred

156 be used of same company of MCB to be used) suitable for (B) three Ea. 4.00 2,913.85

phase incoming and single phase horizontal type outgoing Per Thirteen Rupees

phase isolation type (PPI) (b) sheet steel double door (ii)6 way Eighty Five Paise

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link,

earth bar and DIN rail, confirming to IS 13032 and BS 5486-

Thousand Six

1986,IP-54 suitable for 63/100 AMP TPN MCCB + RCCB as

157 incomer and three phase outgoing as per following .(The DBs Ea. 1.00 18,663.60 Hundred Sixty

should be used of same company of MCB to be used) Three Rupees

(D)12 way outgoing Fifty Nine Paise

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

One Thousand

capacity of 10 KA and suitable for operation on single phase

Nine Hundred

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component.

Ea. 10.00 1,969.50 Sixty Nine

Rupees Fifty

for following Max. rating erected as directed (i) 25 Amps.DP

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA sheet Twelve

duly epoxy power painted inside and outside with hinged doors Thousand Three

and locking arrangement consisting of suitable size of 4 Pole MCB Hundred Ninety

159 and 4 pole contactor (cat-III)with analog time switch, auto manual Ea. 1.00 12,399.77

Nine Rupees

switch of same make and suitable input and output Bakelite Seventy Seven

terminals and with door earthing approved by Engineer in Paise

charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

Two Thousand

capacity of 10 KA and suitable for operation on single phase

Two Hundred

V,50Hz. having characteristic of quick action & tripping with all

160 advance feature & do not incorporate any electronic component. Ea. 6.00 2,235.13 Thirty Five

for following Max. rating erected as directed (ii) 40Amps. DP Rupees Thirteen

Cat. III Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

Two Hundred

CCT 3000 K to 6500K,

Ninety Five

161 Luminaire efficacy> 85 lumens/watt ,LED Nos. 10.00 295.93

Rupees Ninety

LED driver efficiency > 85 %

Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % Two Hundred

162 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 11.00 220.18 Twenty Rupees

description have shown ranges of Wattage capacity of LED Eighteen Paise

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Four Hundred

LED driver efficiency > 85 % Twenty Seven

163 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 29.00 427.23

Rupees Twenty

description have shown ranges of Wattage capacity of LED Three Paise

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Seven Hundred

LED driver efficiency > 85 % Fifty Eight

164 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 87.00 758.51

Rupees Fifty One

description have shown ranges of Wattage capacity of LED Paise

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Two Thousand

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 Two Hundred

165 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Nos. 10.00 2,201.80

One Rupees

description have shown ranges of Wattage capacity of LED Eighty Paise

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) 36 watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen

Seven Hundred

output from luminaire 720lm , input voltage range 90-300VAC

Eighty Seven

166 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to Nos. 5.00 787.80

Rupees Eighty

+60degC working temperature, AL frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm

Three Thousand

O.D 4 mtr. Long duly painted with two coats of aluminium paint

Two Hundred

complete with metallic base plate of 300 mm x 300 mm x 4mm

167 Nos. 10.00 3,225.94 Twenty Five

thick for using as a compound light pole with approx. weight

Rupees Ninety

Four Paise

Providing and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and having spread of 1 Five Hundred

mtr. length with suitable rise as per site condition & suitable Sixty One

168 welded stiffener reducer and nipple with check nut complete Nos. 10.00 561.56

Rupees Fifty Six

painted with one coat of Red oxide / PU base primer and two coats Paise

of Aluminium / PU paint. paint with following nos of arms. [A]

Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in

Six Hundred

/ loop out in built terminal suitable for four core cable, waterproof

169 Nos. 10.00 616.10 Sixteen Rupees

of I.P. 54 protected with clamp or bolt nut & earth bolt of following

size. (B) 250mm x 194mm x 99 mm

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x

cm. Deep in below ground level with plinth of 45 cm x 45 cm (or Eight Hundred

170 45 cm dia x 45 cm) high upper ground level with necessary curing Nos. 10.00 809.01 Nine Rupees and

and finishing in approved manner. ( for 4 & 6 mtr pole) One Cent

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with

Two Thousand

earthing.(Make shall be approved by Engineer in charge) including

171 Supplying and erecting 19 / 20 mm. nominal bore Medium Class Nos. 33.00 2,056.36 Fifty Six Rupees

M.S. Pipe down rod erected duly painted for fan complete with Thirty Six Paise

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and One Hundred

172 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Nos. 33.00 108.07 Eight Rupees

complete erected concealed in Ceiling with necessary finishing. Seven Paise

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

Eighteen Rupees

173 hook or Fan box. Nos. 33.00 18.18

Eighteen Paise

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square One Thousand

frame. 250mm with 1350 RPM Cat.II Three Hundred

Sixty Six Rupees

Fifty Three Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and erecting required size HOT dipped Galvanised iron

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Seventy Seven

175 Motors etc. using proper clamp. Kg. 100.00 77.77 Rupees Seventy

Seven Paise

Providing and erecting required size Copper strip for earthing of

Seven Hundred

H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using

Ninety Four

176 copper clamp. Kg. 50.00 794.87

Rupees Eighty

Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to

SWG.Using for DB earthing wire 8 to 16 SWG. Seventy Seven

177 Kg. 50.00 77.77 Rupees Seventy

Seven Paise

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved

make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of Seven Thousand

178 (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

Ninety Five

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at Rupees Twenty

no load & dry form, Sulphar content:- <2%(C) Back fill Compound Five Paise

:- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. [B]

For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved

make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / Ten Thousand

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at Five Hundred

179 no load & dry form, Sulphar content:- <2%(C) Back fill Compound Ea. 2.00 10,593.89 Ninety Three

:- Earthing compound should be capable to retain moisture for Rupees Eighty

long time Necessary test report must be submitted by Agency. [C] Nine Paise

For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in

other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in Forty Seven

existing pipe as per direction. [C] CAT -

180 RMT 1190.00 47.47 Rupees Forty

Seven Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor Eighty Two

with battery, over/under voltage output with over load & short Thousand Nine

181 circuit protection equipment. The system housed in CRC sheet Nos. 1.00 82,941.20 Hundred Forty

duly powder coated paint with following power backup.with MS One Rupees

painted batteries stand, 10% Overload capacity for momentary Twenty Paise

load. (C) 3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr.

& cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚ C within a hour, Forty Nine

The water cooler should be comprising of hermetically sealed Thousand Five

182 compressor, fan motor, condensing unit, water tank surrounded Ea. 1.00 49,559.69 Hundred Fifty

by evaporating coil, thermostats, relay etc. complete with Nine Rupees

necessary inlet & outlet connection. The body of water cooler will Sixty Nine Paise

be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

Twenty Nine

housing with 'O' ring presediment filter GAC filter, carbon filter

Thousand One

suitable buster DC pump capacity 80 psi, mention with 40 psi

Hundred Eighty

183 inline type post carbon filter auto low & high pressure switches Ea. 1.00 29,187.99

Seven Rupees

with following size of storage tank & LPH capacity & erected as

Ninety Nine

directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Providing Water proof straight Joint in PVC insulated flat flexible One Hundred

copper cable by using insulating material, water proofing material, Eighty Nine

184 & making the joint complete. (A) Up to 10Sq. mm Ea. 10.00 189.88

Rupees Eighty

Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image

Sensor (0.8758 centimeters) Max. 4MP (2688 × 1520)@1-

25/30fps/ (2560 × 1440)@1-25/30 Instastream, H.265, H.264, Four Thousand

H.264H, H.264B, MJPEG Support Triple stream WDR (120dB), One Hundred

185 Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital Nos 13.00 4,156.15

Fifty Six Rupees

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of Fifteen Paise

30 Mtr., IP67, PoE complete with rj45 connector crimping, PVC

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-

LQ CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS

Image Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-

25/30fps/ (2560 × 1440)@1-25/30 Instastream, H.265, H.264,

H.264H, H.264B, MJPEG Support Triple stream WDR (120dB), Eight Thousand

186 Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital Nos 6.00 8,080.00

Eighty Rupees

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of

50 Mtr., IP67, PoE complete with rj45 connector crimping, PVC

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP

PLUS MAKE - 32 Ch. 4K Network Video Recorder AS PER

SPECIFICATIONS : Up to 32 channel IP camera input Max. decoding

capability: 8 × 1080p@30 fps, 2 × 8 MP@30 fps Smart

Instastream/H.265/H.264 /MJPEG Max. 160/128/60 Mbps Eighteen

incoming/recording/outgoing bandwidth Support 2 SATA HDDs Thousand One

187 up to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / Nos 1.00 18,180.00

Hundred Eighty

VGA simultaneous video output Support Multi-brand network Rupees

cameras ONVIF Version 2.4 conformance Mobile Software: iCMOB,

gCMOB CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance

Thousand Three

188 Nos 1.00 13,352.20 Hundred Fifty

Two Rupees

Twenty Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS

PER SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo

gigabit SFP slots.

PoE power budget is up to 250 W, making it ideal for small to

medium business surveillance systems. Port Priority is able to

guarantee the quality of sensitive application like video monitor. Fifteen

189 PoE Auto Recovery automatically reboots your dropped or

Thousand One

unresponsive PoE-powered devices. Hundred Fifty

Intelligent power management protects the switch from overload. Rupees

QoS ensures smooth traffic for latency sensitive applications. IGMP

Snooping optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to

Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Three Thousand

190 Guest Wi-Fi, VPN - TP-Link Archer C50 AC1200 or equivalent Nos 2.00 3,030.00

Thirty Rupees

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9

Twenty Three

Thousand Four

191 Nos 1.00 23,482.50 Hundred Eighty

Two Rupees

Fifty Paise

SITC OF 15U NETWORK RACK - Power Strip with necessory Nine Thousand

sockets, mounting trays, exhaust fan complete with accessoreis - Five Hundred

192 600 X 600MM approx. size -- Elirix make Nos 1.00 9,595.00

Ninety Five

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling

Two Thousand

speaker input Power:8 Watt RMS Power Taps:8/4/2W on 100 V

Two Hundred

193 Freq.Responce:60-15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X Nos 20.00 2,222.00

Twenty Two

H77mm/0.78kg, Model no.CS-6081T

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux.,

Twenty Two

frequency Response :50-1500HZ I3db, Tone, Controls :Cut &

Thousand Seven

194 Boost type, LED Meter : 5 LED Arrays, The amplifier suitable to Nos 1.00 22,725.00

Hundred Twenty

operate 240V A.C.& 24volt D.C. (Battery) with automatic

Five Rupees

changeover from AC to Battery operation, duly protected by wrong

Battery Polarity connections.

Supplying & erecting Mixing Console having channels, Audio

mixer with. Echo facility for live performance, Auditorium &

stadiums, having following features & facilities. (a)input Channels :-

Each channel has separate

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum

level for minimum noise (c)BASS, MID & TREBLE ‘ controls

Separately for each input channel (d)ECHO control for each

channel (e)PAN control for echo channel for left or right output (f)

AUX Control : To control , level of the channel in final mix to AUX

sound output (g)Channel ON/OFF switch (h)ECHO Section :- ECHO,

reverb & Chorus effect can be added to all input channel by

different setting of Delay, Reverb & Level control (i)Tape section

(j)Aux. send & return For sending Pre-feeder output of channel for

monitoring or adding a special effect unit (k)Mono / Stereo output

controls (m) Head phone output for monitoring purpose.

Technical specification: Thirty Eight

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Thousand Six

195 Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Nos 2.00 38,632.50 Hundred Thirty

Balance/42 dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms Two Rupees

unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R Fifty Paise

Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at

100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line

Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM / +17

dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0

dB, 0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh

power taps / impedance having frequency response 150-20000

Hz with following specifications (b) With 2 speakers having power Five Thousand

196 handling capacity of 23W(MAX) & 15 W (RMS), each speaker have Nos 2.00 5,050.00

Fifty Rupees

impedance of respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather

& Dust resistant ceiling/ wall mounted sound speaker with

decorative case & mesh grille with foam layer under grill, rotary-

response 150-20000 Hz with following specifications (b) With 2 Five Hundred

197 speakers having power handling capacity of 23W(MAX) & 15 W Nos 4.00 7,575.00

Seventy Five

(RMS), each speaker have impedance of respectively 670 ohms/

15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-

605, GMB-6C or equivalent in Bosch /Shure etc. Eleven Thousand

198 Nos 1.00 11,110.00 One Hundred

Ten Rupees

SPEAKER WIRE

Eighty Five

199 Mtr 500.00 85.85 Rupees Eighty

Five Paise

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories by Fifty Six

means of extra supplied proper insulated copper tubing,drain PVC Thousand Three

200 pipes suitable for ( cost includes Eco Friendly green gas charging Each 2.00 56,353.96 Hundred Fifty

and 15A plug top & Remote Control & MS Stand) with necessary Three Rupees

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for Ninety Six Paise

1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical

power connection charges and inspector approval for power(to be Fifty Thousand

201 paid to concern electrical power supplier company) Lot 1.00 50,500.00 Five Hundred

Conventional type Smoke detector having following specifications :

Dual LED’s for 360 visibility. Advanced detection and

communication protocol. Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54

Standard. Operating Voltage : 10 ~ 28V DC. O O Operating

Temperature : 0 C to 37.8 C. Relative Humidity : 10% to 90%

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. One Thousand

One Hundred

202 Start Up Time : 30 Seconds. Nos 18.00 1,146.35

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Forty Six Rupees

Remote Output : 15mA maximum open collector. Smoke Thirty Five Paise

Sensitivity : 0.10 to 0.16 dB/m. Thermal Rating : 57 C(135 F).

complete with Junction box RAVEL make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications

: CE Approved. 16 X 2 Dot Matrix LCD Display. Standby battery

backup with built in charging. Switch Mode Power Supply. Tactile

eypad for easy panel operation. System ON indication. Low Battery

visual warning with audible ton. Fire / Fault status in

unambiguous colored LED indication. 2 programmable relays for

fire,supervisory and fault. All zones accept smoke detectors and

any normally open contact device. Any Zone can be configured as

alarm or supervisory. Zone wise isolation and one man walk test

facility. Programmable Aux Outputs. Lamp test & Drill test facility. Nine Thousand

100 All Events log with RTC. Date / Time / Password Five Hundred

configuration. Programmable auto silence facility. Zone wise

Ninety Five

sounder / contact optional). TCP-IP / GSM facility (optional). 120 Rupees

/ 230VAC + 10% -15%, 60 / 50 Hz, 50W Operating Temperature

– 49° C / 32 – 120° F. Storage Temperature 0 – 60° C Relative

Humidity 93 ± 2% RH (non-condensing) at 32 ± 2° C / 90 ± 3° F

Charging voltage Charging current 28 V ± 5% 350mA (max) -

RAVEL Make cat no. RE-102R

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

SITC of Hooter / Sounder as per following specifications :

Operating Voltage : 24V DC Operating Current : 40mA Sound Level

: 85dB@1m Operating Temperature : 0 – 49° C / 32-120° F.

Sounder Type : Piezo Electric Type Tone Type : Fire Engine Siren Nine Hundred

Forty Nine

204 Material : ABS Plastic Colour : Red Dimensions : 96 H mm X 76 L Nos 3.00 949.40

mm X 28 D mm Back Box : 95 H mm X 75 L mm X 58 D mm Rupees Forty

Mounting Type : Surface / Flush Mount complete with Back Box - Paise

RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications :

Operating Voltage : 24VDC Operating Current : 30mA Colour : Eight Hundred

205 Green / Yellow / Red Material : Plastic IP Rating : IP-50 Size : 86 X Nos 3.00 808.00

Eight Rupees

86 X 50 mm - RAVEL make Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey One Hundred

Pump 10.8M3/hour @70M Head.Horizontal Centrifugal End

Suction. with M.S.fabricated common base plate, coupling,

Thousand Forty

206 coupling guard, foundation bolts etc. for motor and details pump No. 1.00 1,19,041.95

One Rupees

specificaion follow as per specification as mentioned in tender

Ninety Four

Supplying, installation, testing and commissioning of electric

driven Monoblock Fire pump 960LPM at 70 m head 2900 RPM

pump. suitable for automatic operation and consisting of Two Hundred

following: complete in all respect as required. With Suitable HP, SQ Fifty Two

207 cage induction motor TEFC type suitable for operation on 415 Set 1.00 2,52,399.00 Thousand Three

volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, Hundred Ninety

horizontal foot mounted type with class 'F' insulation, conforming Nine Rupees

Diesel Operated pump 70m head, 2900 RMP with day tank & Five Hundred

battery set complete with 100 ltr diesel Fifty Five

208 SEt 1.00 5,55,002.07 Thousand Two

Rupees Seven

Control Panel for the operation of Jockey pump, Fire pump Electric Ninety Four

and Fire pump Diesel with automation Thousand Nine

209 SEt 1.00 94,990.50 Hundred Ninety

Rupees Fifty

Providing, fixing, testing & commissioning of Pressure Switches

for automation of fire pumps. Pressure switches shall be double

Two Thousand

pole single throw type suitable for 3 phase supply with diaphragm.

Four Hundred

210 Aluminum Enclosure with IP 66 protection follow as per Nos. 3.00 2,400.47

Rupees Forty Six

specification as mentioned in tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings, Ten Thousand

Flanges, Nutbolts, Washers, Gaskets etc. follow as per Ninety Rupees

specification as mentioned in tender volume.. Ninety Four

of size: 150mm dia. Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly Six Thousand

valve conforming to I.S:13095 class PN 16 rating with Fittings, One Hundred

212 Flanges, Nutbolts, Washers, Gaskets etc. follow as per Nos. 2.00 6,107.98 Seven Rupees

specification as mentioned in tender volume.. Ninety Eight

of size: 100mm dia. Paise

Supplying, Installation, Testing and commissioning of C.I.Ball type Eighteen

Foot valve conforming to I.S:13095 class PN 16rating with Fittings, Thousand Five

Flanges, Nutbolts, Washers, Gaskets etc. follow as per Hundred Thirty

specification as mentioned in tender volume.. Three Rupees

of size: 150mm dia. Twenty Nine

Providing, fixing, testing and commissioning of C.I. Dual plate Eleven Thousand

type Non-Return Valve class PN 16 rating with fittings, flanges, Forty One

214 nutbolts, washers, gaskets etc.of sizes: 150mm dia Nos. 2.00 11,041.19

Nineteen Paise

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

Two Thousand

screwing, welding etc. and providing all fittings like flanges,

Three Hundred

bends, tees, elbows, reducers, clamps, hangers etc. with painting

215 of one coat of primer and 2 or more coats of synthetic enamel Meter 35.00 2,391.95 Ninety One

paint of approved make / shade complete as per specification. Rupees Ninety

150mm dia Four Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

One Thousand

screwing, welding etc. and providing all fittings like flanges,

Seven Hundred

bends, tees, elbows, reducers, clamps, hangers etc. with painting

216 of one coat of primer and 2 or more coats of synthetic enamel Meter 15.00 1,744.20 Forty Four

paint of approved make / shade complete as per specification. Rupees

100mm dia. Nineteen Paise

Providing, fixing, testing and commissioning of Under Ground

M.S. ERW Black C Class Heavyduty pipes as per IS: 1239 (upto

Three Thousand

mm dia.) and IS: 3589 (upto 200 mm dia. And above) with

Two Hundred

IWL/pypecoat, 4mm thickness wrapping and coating and

217 Meter 10.00 3,265.73 Sixty Five

providing all fittings like flanges, tees, elbow, fasteners with all

Rupees Seventy

follow as per specification as mentioned in tender volume..

Three Paise

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt

Three Hundred

reducer, clamps & plug etc.with welding,threading,jointing. And

Sixty Three

218 Excluding cutting holes in wall Mtr 80.00 363.56

Rupees Fifty Six

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt , Four Hundred

reducer, clamps & plug etc.with welding,threading,jointing. And Fifty Nine

219 Excluding cutting holes in wall Mtr 40.00 459.50

Rupees Fifty

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt

Five Hundred

reducer, clamps & plug etc.with welding,threading,jointing. And

Seventy Five

220 Excluding cutting holes in wall Mtr 25.00 575.64

Rupees Sixty

/slab and making good of the same. The pipe & fittings shall have

Four Paise

One coat of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt , Seven Hundred

reducer, clamps & plug etc.with welding,threading,jointing. And Ninety Seven

221 Excluding cutting holes in wall Mtr 15.00 797.82

Rupees Eighty

/slab and making good of the same. The pipe & fittings shall have Two Paise

One coat of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt

Nine Hundred

reducer, clamps & plug etc.with welding,threading,jointing. And

Forty Nine

222 Excluding cutting holes in wall Mtr 15.00 949.31

Rupees Thirty

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket,

tees, unions, flanges with hot deep galvanized nut & bolt , One Thousand

reducer, clamps & plug etc.with welding,threading,jointing. And Two Hundred

223 Excluding cutting holes in wall Mtr 30.00 1,201.78 One Rupees

/slab and making good of the same. The pipe & fittings shall have Seventy Seven

One coat of primer and two coats of fire red / PO red 80 mm dia. Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing fixing testing and commissioning of GUN METAL 15 mm

Three Hundred

size quartzoid bulb type sprinklers, set to operate at 57 degree

Ninety Nine

224 Centigrade. Pendent type type with required accessories complete. Nos. 85.00 399.96

Rupees Ninety

(GUN METAL)

Supplying , installation, Testing & commsioning of Flexible Drop One Thousand

225 1000mm Nos. 40.00 1,514.85 Five Hundred

Fourteen Rupees

Providing, fixing, testing and commissioning of RRL Fire delivery

Six Thousand

hose 63 mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’

Five Hundred

Fitted with Stainless Steel male & female coupling ISI Mark IS :903

226 duly binned with copper wire winding follow as per specification Nos. 4.00 6,502.28 Two Rupees

Twenty Seven

as mentioned in tender volume..

Supply installation ,Testing & commissioning of single headed

oblique pattern ISI hydrant landing valve with 80 mm dia flanged Seven Thousand

inlet & 63 mm dia instantaneous type female outlet complete with Six Hundred

227 PVC cap and chain, twist release type lugs WITH all accessories as Nos. 2.00 7,650.75 Fifty Rupees

per SI Standard Conforming to IS-5290. (SS 304- Body SS-304 Seventy Five

Coupling) Paise

Providing, fixing, testing and commissioning of weatherproof Six Thousand

standard fire Hose Cabinet wall mounting type 18 Gauge. (750 x

One Hundred

600 x 250) having Double Opening with M.S. fabricated stand,

228 Nos. 2.00 6,189.79 Eighty Nine

necessary lock & key arrangement follow as per specification as

Rupees Seventy

mentioned in tender volume..

Eight Paise

Supply installation ,Testing & commissioning of SS Fire Brigade

Seven Thousand

connection consisting of 2WAY. 63 mm instantaneous type male

Six Hundred

coupling with 125 mm Dia. flanged outlet complete for fire water

229 No. 1.00 7,650.75 Fifty Rupees

Seventy Five

Supply installation ,Testing & commissioning of SS Fire Brigade

connection consisting of 4WAY. 63 mm instantaneous type male Eleven Thousand

coupling with 125 mm Dia. flanged outlet complete for fire water Seven Hundred

230 tank. No. 1.00 11,731.15 Thirty One

Rupees Fifteen

Providing, fixing, testing and commissioning of Wall mounting Fix

type First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia Ten Thousand

IS : 444 Type II fitted wit SS Shutt off Nozzle follow as per Eight Hundred

231 specification as mentioned in tender volume.. Nos. 2.00 10,877.20 Seventy Seven

Nineteen Paise

Supply installation , testing & commissioning of ISI Standard SS-

Four Thousand

304 branch pipe with nozzle of 20mm nominal bore outlet as per

One Hundred

IS:903 suitable to fit with standard instanteneous type 63mm dia

232 Nos. 2.00 4,182.41 Eighty Two

coupling (SS-304)

Rupees Forty

Supply installation testing & Commissioning of 25 MM dia Air

Two Thousand

Realese valve complete in all respects. (GUN METAL)

Two Hundred

233 Nos. 2.00 2,294.72 Ninety Four

Rupees Seventy

Supply installation testing & Commissioning of Pressure guage 4"

Two Thousand

dial 0 to 16 kg/cm2 with syphon and cock complete in all respects

Three Hundred

234 Nos. 2.00 2,397.24 Ninety Seven

Rupees Twenty

Three Paise

Supply installation testing & Commissioning of 25 MM dia Ball

Nine Hundred

Valve (SS-304) complete with SS Ball with single handed lever

Sixty Nine

235 complete in all respects. Nos. 2.00 969.10

Rupees Nine

Providing & Installation of ABC Stored Pressure Type Fire

Extinguisher 6 Kgs. capacity bearing ISI Mark for Fighting ABC Two Thousand

Class of Fire. The Extinguisher will be Manufactured Strictly as per Three Hundred

236 BIS: 15683:2006 bearing ISI. Mark follow as per specification as Nos. 5.00 2,355.72 Fifty Five Rupees

mentioned in tender volume.. Seventy Two

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity,

made from the brand new seamless cylinder, as per IS: 7285 and

Five Thousand

CCE approval, fitted with a Discharge hose and horn and wheel

Four Hundred

237 type valve with initial Charge as per IS: 15683:2006 specification, Nos. 5.00 5,456.63

Fifty Six Rupees

bearing ISI Mark follow as per specification as mentioned in tender

Sixty Two Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing & fixing Modular type ABC Dry Powder Fire Four Thousand

extinguishers 5 litre capacity Fire Extinguishers. The Extinguisher Four Hundred

238 will be Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Nos. 5.00 4,447.03 Forty Seven

Mark follow as per specification as mentioned in tender volume.. Rupees Three

Providing, fixing, testing and commissioning of On -Off Switch

Four Hundred

follow as per specification as mentioned in tender volume..

239 Nos. 3.00 408.65 Eight Rupees

Sixty Four Paise

Providing, fixing, testing and commissioning of below Auto Glow Two Hundred

Signages follow as per specification as mentioned in tender Thirty Three

240 volume.. Emergency Exit 4” X 12” Nos. 2.00 233.17

Rupees Sixteen

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority Thirty Thousand

241 with all other charges and documentations for getting No Job. 1.00 30,300.00 Three Hundred

Objection Certificate.(as per GMB Approved rate) Rupees

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing)

having 12 mm thick marina plywood IS 710 grade both side on

aluminum framing of gauge 16. Aluminum framing size for

vertical & horizontal support is 50 mm x 25 mm. Grid of

aluminum framing is 600 mm x 600 mm. All exposed surfaces

finished with 1 mm thick Laminate of approved shade complete

with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation,

make hole/face plate for conduit pipes of electrical / networking

cables with open able stud from partition Including all materials

and labor etc. Make necessary grooves as per shown in drawing. Six Thousand Six

242 Using of 12 mm thick clear glass with proper crystal edges & Sqm

Hundred Twenty

with suggested frosted films on glass. All joints are covered with Rupees Fifty Five

teakwood beading Patti finished with polish matching with Paise

laminate. Including door of same design if required Complete

with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer

In charge. Contractor has to provide all necessary cut outs (race

ways.) for Electrical works & no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85%

noncombustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent

of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm at joints to get

required length and size of 24X38mm made from 0.30 mm thick One Thousand

(minimum) sheet, 1200mm centre to centre, and centre to centre Six Hundred

243 to form agrid of 1200X600mm and secondary thick (Minimum) Sqm 66.00 1,674.15 Seventy Four

sheet to be interlocked at middle of the 1200X600mm panel to Rupees Fourteen

form grid of size 600X600mm resting on periphery Paise

walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with

the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing & fixing work station / table having ht of 750 mm Top,

with MS Pipe Structure of Frame as per Architect/ Engineer Design

table is also made up of 19mm Thick. Top of Table is 19mm thk

ply with laminate Finish Per Requirement and All internal &

external Joints finished with teakwood beading Patti. Common or

front Part of Table is Sectationized with MS Perforated Sheet. All Twenty Four

exposed and internal surfaces covered with Laminate Finish of Thousand Eight

244 approved shade & Complete as per detail drawings & as instructed Sqm 42.00 24,870.53 Hundred

by Architect/consultant/ Engineer In charge. Complete with all Seventy Rupees

necessary hardware like nails, ss screws, table chain, Key board Fifty Three Paise

trey, TDS channel, adhesives etc. Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be

made for it.

Providing & fixing office table / staff table having ht of 750 mm

Top, with 19mm thk plywood or MS pipe Structure as per

table is also made up of 19mm Thick. Top of Table is 19mm thk

ply with laminate Finish Per Requirement and All internal &

external Joints finished with teakwood beading Patti. Item includes

fixing of drawers and keyboard tray and storage with shutters

under table as per drawing. With grooves shown as per drawing. Twenty Nine

All exposed and internal surfaces covered with Laminate Finish of Thousand Three

245 approved shade & Complete as per detail drawings & as instructed Sqm 8.00 29,350.96 Hundred Fifty

by Architect/consultant/ Engineer In charge. Complete with all Rupees Ninety

necessary hardware like nails, ss screws, table chain, TDS Five Paise

channel, adhesives etc. Contractor has to provide all necessary cut

outs for Electrical works & no extra payment shall be made for it.

All ply should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of

350mm/450mm/600 mm, having skirting of 75 mm, including

vertical supports & horizontal shelves shown as per drawing made

by 19 mm thick Marin ply, Open Front Side for Selves with using

12 mm thick Marin ply for framing. All complete with proper

teakwood beading and Teakwood molding as per design. Back ply

is 12 mm Marin ply. All exposed are covered with 1 mm thick Ten Thousand

Laminate & internal surfaces are covered with 1 mm thick Three Hundred

246 laminate. External & internal joints covered with beading Patti Sqm 60.00 10,381.62 Eighty One

complete with polish finish. With grooves shown as per drawing. Rupees Sixty

All complete with proper hardware like, S.S. Screws, MS Nails, One Paise

Magnets, cable manager SS 304 etc. All Details as per shown in

detail drawings & as per instructions of architect/consultant / in

charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having

depth of 350mm/450mm/600 mm, having skirting of 75 mm,

with proper locks. includinf of vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply,

having shutters of 19 mm thick ply or Clear Glass with using

mm thick Marin ply for framing. All complete with proper

teakwood beading. and Teakwood molding as per design. Back ply

is 12 mm Marin ply. All exposed are covered with 1 mm thick Thirteen

Laminate & internal surfaces are covered with 1 mm thick Thousand Eight

247 laminate. External & internal joints covered with beading Patti Sqm 41.00 13,815.77 Hundred Fifteen

complete with Polish finish. With grooves shown as per drawing Rupees Seventy

All complete with proper hardware like locks, S.S. Screws, MS Six Paise

Nails, Magnets, table chains, cable manager SS 304 Handles of

250 mm and 100 mm dia etc. All Details as per shown in detail

drawings & as per instructions of architect/consultant / in charge

Notice Board / Pin Board

Seven Thousand

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing

Two Hundred

Arrangement complete as per drawing and Directed by Engineer In

248 Nos 4.00 7,259.38 Fifty Nine

Charge etc complete.

Rupees Thirty

Seven Paise

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and fixing News paper stand size 650 x 820 x 1200 or

required height made out of 18 mm wtr.prf. [MR Grade] ply with

1 mm. thk inner laminate for top including back panel with

shelves for magazine and news paper as shown in drawing, all

Thousand Forty

249 expose joints finish with teakwood beadsing patti with polish Nos 2.00 13,044.62

Four Rupees

finish and provision of openable top for news paper storage

Sixty One Paise

complete as per detailed drawings and Engineer-In Charge and

Supplying and providing reading chairs with PP arms with soft PU

pads, Seat and back upholstered with cushioned and MS powder

coated frame and cantilever legs. Overall dimension 590 L x 600 W

x 915 H (Or as specified) complete as directed by architect and Six Thousand

product as per given specification. Complete as per architectural Sixty Rupees

design and concept and approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

-Knee tilt mechanism Ten Thousand

251 -360 swivel motion/ 100mm stroke gas

Seven Hundred

-Nylon Star base Thirty Eight

-Pushback mechanism & Comfy seating. Rupees Six Paise

-Complete as per architectural design and concept and approved

by Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift Five Thousand

Twenty Four

252 -PP Fixed Arm rest Nos 8.00 5,024.65

-Nylon Star base/Twin wheel nylons casters Rupees Sixty

-Complete as per architectural design and concept and approved Four Paise

by Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with Five Hundred

paddle. Capacity-10 to 15 Ltr. Fifty Seven

Rupees Fifty

Supplying and providing dust bin made of 100% virgin plastic with One Thousand

paddle. Capacity-120 L Five Hundred

254 Nos 3.00 1,568.03 Sixty Eight

Rupees Two

Blinds : Providing and fixing as per approved make manual roller

blinds with Soltis fabric & spring drive system with steel ball

chain/one touch with speed control action roller blind with end

brackets with head ail, components, bottom bar.Color-Alu with

manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the work

complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC

with Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm,

Openness Factor:3%, Visible Light Transmission (N-N): 2%-4%, One Thousand

Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - Nine Hundred

255 0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing Sqm 115.00 1,962.94 Sixty Two

Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Rupees Ninety

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All Three Paise

complete as per approval of designer & instruction of Project

Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height

will be measured from top of the pelmet till the bottom of the

bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft One Hundred

tall, with proportionately base dimenstion as per approved design Fifty Thousand

256 by client and complete as per instruction of engineer-in charge Nos 1.00 1,50,995.00 Nine Hundred

and consultant. Ninety Five

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

Providing and fixing Wall art/Photoframes of size 2ftx2ft with

Two Thousand

wooden frame of size 2in x 1in consisting 6mm thick ply in back

Four Hundred

with digital vinyl printing and 5mm thick glass on top if required.

257 Nos 30.00 2,497.23 Ninety Seven

Rupees Twenty

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution One Hundred

3840 x 2160 pixels with HDR TypeHDR 10+ complete as per Two Thousand

Rupees Fifty

Seven Paise

Providing and fixing PCs with configuration of Core I5 12th Gen,

Fifty Nine

8Gb RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE

Thousand Seven

2021 STUDENT, Full HD display of 21 to 23.8' with keyboard and

259 mouse. Nos 7.00 59,748.35 Hundred Forty

Eight Rupees

Thirty Four Paise

Providing and fixing Automatic Duplex laser printer with 30 pages

per minute print speed, 8 mb memory, Large 250 sheet paper tray

Thousand One

with USB connectivity.

260 Nos 1.00 15,157.58 Hundred Fifty

Seven Rupees

Fifty Seven Paise

Supplying and providing xerox machine- -20PPM Copy / Print

Fifty Eight

/Color Scan / Duplex DADF /Single

261 Tray Nos 1.00 58,075.00

Seventy Five

Providing and fixing Directional and Informative Signages- SS

Ninety Two

Plate, Grade 304, Brush finish, 2mm Thickness with smoothen

Thousand Four

corner edges, Acid etching with duco color, SS studs 1.5' away

262 from wall.fitting as per dirction of Architect and EIC Sqm 1.50 92,433.18 Hundred Thirty

Three Rupees

Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm

thick letter 1.5" depth 10" Height with Duco color & fitting as per

Thousand Five

263 direction of Architect & EIC. Nos 1.00 52,520.00

Hundred Twenty

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Sr. Qty. May Tender Rate Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Rs. Rate In Words

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal