COMPREHENSIVE REPAIR TO OTM ACCN IN 58 ARMD REGT, 687 TK TPTR PL, 255 ARMD WKSP AND 12 CAB IN THE AREA OF AGE B/R-II AREA OF GE (ARMY) NO.1 JODHPUR.

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MD land, complete all as specified and as directed.

M&L for 25 mm thick Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, including. finishing the surface even & rough to receive tiling etc., complete all as specified and directed.

M&L for 15-18mm thick machine cut Udaipur green marble, (size & shape, shade and pattern as approved by GE) as in cooking platform over & including M&L 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and directed.

M&L for 18 to 20 mm thick (telephone black shade) granite stone, as in WHB counter top, steps, jambs, pillars, window cills & similar nature works, machine cut, (table rubbed and polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

M&L of 18-20mm thick machine cut KOTA stone slab as in floor (size not less than 580mm x 580mm) , treads, steps etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified as in floors over and including 15mm thick in screed bed in CM (1:6), complete all as specified and as directed.

M&L of 18-20mm thick machine cut KOTA stone slab riser of step , skirting, dado etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and mirror polishing all as specified including backing coat of 10mm thick in CM (1:4), complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for glazed colour ceramic tiles digital series(premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3), complete all as specified and directed.

M&L for non skid ceramic coloured tiles, digital series (premium quality) of size 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for double charged Vitrified Ceramic tiles, 9-10 mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for treating the surface with beeswax polish to terrazzo tile floors, marble, granite, kota stone etc for complete all as specified and directed

S&F in replacement anodised aluminium snap grid frame work ( 605x605 mm) for false ceiling, including dismantling of existing false ceiling etc., complete all as specified and directed.

S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid,etc complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

M&L for Gl frame work size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and including S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distember over a coat of 'Birla wall/ceiling care putty including dismantling of existing false ceiling of any thickenss wiht cover fillets molsing, risers, complete all as specified and as ditected.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed.

S&F in replacement solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on wall/ PVC frame as per specifications, including dismantling of old existing u/s wall lining and complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering, complete all as specified & directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10 mm thick Rendering in CM 1:4 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed, complete all as specified & directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying 2 mm thick Birla/JK wall care putty and two coats of oil based distemper (white or tinted) over & including M&L for single coat of primer on wall complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying two coats of OBD over & including M&L for single coat of primer, complete all as specified and directed.

M&L for preparation of new/old plastered/unplastered surfaces of wall & applying two coat of interior emulsion paint (plastic paint) over & including M&L for 2mm thick (Birla) wall care putty , complete all as specified & as directed.

M&L for preparation of new plastered or unplastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified & as directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of cement based paint over & including M&L single coat of Primer on wall, complete all as specified and as directed.

M&L for preparation of old painted surfaces of walls or roofs by brooming down or steel wire brushing, scraping down smoke spot, moulds, moss and efflorescent salt and greasy spots and applying one coat of cement base paint, complete all as specified and directed

M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing opening as per specification & drawing complete all as specified and as directed.

M & L for Framed work as in doors or gates Fe 410-w A quality of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 Mix (using 20mm graded stone aggregate) as in bed block for hold fast including necessary form work, complete all as specified and directed.

Taking down steel windows and ventilators ( glazed / fly proof) of any description, complete all as specified and directed.

S&F factory made box type windows (steel) (BWM) with side hung shutter with coolar opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded. Note.:Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same, complete all as specified and directed.

S&F factory made box type windows (steel) (BWM) with side hung shutter without cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Note : (i)-Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii)- Glass panes, grill & wire cloth shall be measured and paid seperately.

All as per item No. 38.00 here-in-above, but without glazing bars

All as per item No. 39.00 here-in-above, but without glazing bars

S&F Box type steel ventilator with top hung shutter including hinges with steel handle with glazing bars, and steel peg stay, complete all as specified and directed.

All as per item No. 42.00 here-in-above, but without glazing bars

Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing confirming to FE 290, gde E-165 etc., complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F factory made PVC shutter 30 mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frmae shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail lock rail on other side and as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slovent cement complete all as specified and directed.

S &F of factory made 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a), complete all as specified and directed.

M&L for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides if one face is covered with decorative face veneer (sanmica) with lipping/frame to match, complete all as specified and directed.

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F Anodised aluminium door/window/ventilator shutters powder coating of any colour (Thickness of powder coating not less than 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc., complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.

S&F in repair Toughned glass 12mm as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, and required accessaries (handle,moterious locl, floor hinhes, clips, silicon etc) necessary, complete all as specified and directed.

S&F pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators, complete all as specified and directed.

S&F 5.5 mm thick tinted forsted glass exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed.

S&F in repairs of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed complete all as specified and directed.

S&F in mortice lock latch with two loovers (Vertical type) mild steel body 100mm long and fixed ,complete all as specified and as directed.

S&F in replacement of stainless steel sink with drainage board, for kitchen or laboratory, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, including brass waste coupling,complete all as specified and as directed.

S & F in replacement of stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

M &L in repair for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete. including taking down of existing Cupboard /Almirah, complete all as specified and direcetd.

S&F in replacement brass mortice lock from steel cupboard doors, size 50 mm with a set of 2 keys, including old u/s existing motice lock, complete all as specified and as directed.

M&L for repairs and resecuring to cup boards including easing of CB shutters, tightning of hinges or handles/knobs hasp and staple etc., complete all as specified and as directed.

S &F Powder coated Aluminium tower bolt 75 mm size fixed to windows , door, complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed.

S&F of 75 mm size powder coated aluminium handle fixed to windows, complete all as specified and as directed.

S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed.

S & F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the steel cupboard, kitchen cabint shutters etc,, complete all as specified and as directed.

S &F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed.

S &F of mild steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed.

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 150 mm double action spring hinge, brass with phosphor bronze wire spring bright polished, complete all as specified and as directed.

S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample, complete all as specified and as directed.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 2 universal type,suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg complete all as specified and as directed.

S&F in repairs 50 mm size best quality double/single door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe all as per sample, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F for 4 mm thick figurred, pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane, complete all as specified and as directed

M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of any tint complete all as specified and as directed .

M&L for preparation of new or previously untreated wooden surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (First quality) of any tint complete all as specified and as directed .

Taking up or down 15/20mm bore CPVC/steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Taking up or down 25 mm bore CPVC/steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings, fixed to wall/ceiling or laid in trenches and Floor and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings, fixed to wall/ceiling or laid in trenches and Floor and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed

S&F in replacement of fancy type, chromium plated, bib tap, cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and directed.

S&F stop valves cast copper alloy (ISI marked) CP screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair, complete all as specified and directed.

S&F in repairs Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F as in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed.

S&F in repair 15mm bore CP brass, central hole basin mixture, with or without lettered 'Hot" or Cold", pop up waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed.

S&F in replacement of two way bib cock with flange 15mm dia, chromium plated, brass, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia, complete all as specified and as directed.

S&F in repairs Grating doom 100 mm dia of PTMT (minimum weight 125 gms), complete all as specified and as directed.

S&F in repairs Grating doom 75 mm dia of PTMT (minimum weight 125 gms), complete all as specified and as directed.

M&L for 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

S&F MS chromium plated peg set of five fixing with wall , complete all as specified and as directed

M&L for 75mm outlet diameter cast iron, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate, complete all as specified and as directed

M&L for 110 mm outlet diameter cast iron nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate, complete all as specified and as directed

S&F tubular towel rail 20mm dia brass chromium plated brass body `D' type 60cm long with bracket and fixed, complete all as specified and as directed

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end , sample as approved by GE, complete all as specified and as directed

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and as directed

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 450 mm X 300 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long, complete all as specified and as directed.

S&F in repair of vetrious china wash basin white cercular/sqare/rectangular (as per sample) on table top including brackets, 32mm bore CP coupling etc., complete all as specified and as directed.

S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor, complete all as specified and as directed.

S&F in repairVitreous China wash down water closet pan (pedestal pattern)(EWC), white (excluding fixing bolts, flushing cistern and flush pipe)and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor, complete all as specified and as directed.

S&F in repair Single piece EWC (brand-I) with slim soft close seat cover complete set constellation dual flush (WB consetellation 5 ped constellation, (As per sample) EWC, cistern & lid CON dual flush, seat cover constellation, cistern fitting (water saver-dual flush) etc., complete all as specified and directed

S &F Vitreous China urinals, bowl type or half stall pattern complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement, , complete all as specified and directed

S&F in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed and complete all as specified and as directed.

S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc., complete all as specified and as directed.

S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in floors & fixing of glass dividing strips & finishing the surface even & smooth without using extra cement complete all as specified & directed

M&L 50 mm thick PCC 1:3:6 type C1 using (20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

Demoltion of cement cocrete padding of water proofing treatment from roof padding taking down bituminous polythene sheets plaster etc overall thickness n.exc 200mm , cleaning of concrese surfaces by wire brushres scrubbing down water and removing the dust debris etc. to a distance 50 mtre but n.exc 250 mtr from the site,complete all as specified and as directed.

M&L for carrying roof treatment infollowing stages:- Applying neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following stage as roof treatment complete all as specified and as directed by Engr-in-Charge : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 2.25 Kg/Sqm using butane torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause No. 21.3, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

M&L Plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/ undulation to make the existing as filling in depression of roof slab, complete all as specified and as directed.

M&L for Preparation of roof surfaces of any description washing with water etc complete & M&L for Treating the plastered surface/padding surface with two coats of epoxy / water proofing adhesive coating complete all as specified by manufacturer and as directed.

M&L for fixing of 0.50 mm thick Aluninium coated Sheet cut to size bent to shape as in covering over crumple joints fixed with screws & bitumen washer, complete all as specified and as directed.

Dismantling existing water tank of capacity exceeding 500ltrs and not exc 1000 ltrs and removing from site, complete all as specified and as directed.

Dismantling existing water tank of capacity exceeding 250ltrs and not exc 500 ltrs and removing from site, complete all as specified and as directed.

S&F in replacement Rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, complete all as specified and as directed.

All as per item No. 129.00 here-in-above but tank capacity is 1000 ltrs

Supply only integral water proofing compound (ISI marked).

Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land, complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 133.00 here-in-above, but except stone

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M&L precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in solid block masonry 10cm thick and setting in cement mortar 1:4, complete all as specified & directed by Engineer-in-charge.

M&L precast cement concrete block masonry using PCC 1:3:6, type B-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, complete all as specified and directed.

M & L chequered cement concrete tiles(laquer coated) 30cm x 30cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including screed bed or bedding layer of 20mm thick in CM 1:6 complete all as specified and as directed.

M & L joint free digital ceramic coloured heavy duty parking tiles (GRC) of size 8 to 10 mm thick (square/rectangular) area of each tiles exceeding 0.08 Sqm but not exceeding 0.16 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block (lacquer coated), 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match, complete all as specified and directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc.,, complete all as specified and directed.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and directed.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement, complete all as specified and directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajja and fascias etc., complete all as specified and directed.

M&L writing or repainting of existing letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high complete all as specified and directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straid portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws, complete all as specified and directed.

M&L for Providing and fixing polyvinyl chloride (PVC) sheet frame UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish)of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified & directed.

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 110/100mm bore, incld. All fittings, complete all as specified & directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified and as directed. Note :- Excavation and earth work shall be measured and paid separately.

Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 75mm bore, incld. All fittings, complete all as specified & directed.

Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .

Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/ceiling with MS clamp or laying floor of suitable size complete all as specified and as directed .

Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/ceiling with MS clamp or laying floor of suitable size complete all as specified and as directed .

S&F 75 mm bore PVC (SWR) bends with oval acess door, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends with oval acess door, complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed.

S&F 150mm diaPVC (SWR) pipe for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) bed to SWR pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork all as specified.laid and jointed complete with collars and incl dismentling complete all as specified and as directed

Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested, suitable for 150 mm bore pipe, complete all as specified and directed.

M&L for Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each, complete all as specified and directed.

M&L for Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr -in- Charge.

M & L providing 35 mm thick pre-cast cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6, complete all as specified and as directed.

M & L providing 35 mm thick pre-cast rainforcement cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in louvers & jallies any size and shape and fixed in any hight (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6, complete all as specified and as directed.

M & L providing precast concrete Posts (100x100 x 750mm) & (100x100x600 mm) of 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in RCC/PCC jali post setting in mortar 1:6 complete all as specified and as directed.

Resucuring /easing and adjusting shutters of any description and in any position area exc 1 sqm but nexc 2 sqm incl taking down of shutter from frames & refixing in the same opening after completion of repair works, complete all as specified and as directed.

Repairs to steel windows / vents incl necessary welding rivetting easing etc., complete all as specified and as directed.

Disconnecting existing tanks cap exc 250 ltr but nexc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and as directed.

Disconnecting existing tanks cap exc 500 ltr but nexc 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and as directed.

S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample, complete all as specified and as directed.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each, complete all as specified and as directed.

Taking down shutter & resecuring and refixing in same position of any description area exc 1 Sqm but n. exc 2 Sqm each, complete all as specified and as directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without coolar opening, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

All as per item No. 179.00 here-in-above but without glazing bars

S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified and directed by Engr-in-Charge.

M & L for Welding in repairs in steel windows hinges,door frame, door hinges etc , complete all as specified and as directed.

M&L for Welding in repairs exc 2.5cm but n exc 5cm in length and thickness of metal n. exc 6mm, complete all as specified and as directed.

S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed.

Dismantling of asbestos cement (Corrugated, semicorrugated etc) sheets in roof coverings, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F for 6MM THICK Asbestos cement corrugated or semi corrugated sheet Fixed with L-type or J-type or cranked hook bolts, two adjustable plain wing ridge 6mm thick serrated ridge for , complete all as specified and as directed.

S&F Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F in replacement Mild steel body peg stays 250 mm long (minimum) to steel windows & vents, complete all as specified and as directed.

S&F in replacement Mild steel body window handles (Left or right) any size to steel windows & vents, complete all as specified and as directed.

S&F in repairs PTMT long Body bib tap 15 mm bore, complete all as specified and as directed.

S&F in replacement Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed.

S &F in repairs PTMT body Ball cock /Float Valve 15/20 mm bore with epoxy coated Aluminum rod & HDPE Ball, complete all as specified and as directed.

S &F in repairs PTMT body Ball cock /Float Valve 25 mm bore with epoxy coated Aluminum rod & HDPE Ball, complete all as specified and as directed.

S &F in repairs GI Nipple 20 mm bore 75mm long for tank connection, complete all as specified and as directed.

Supply only GI Nipple 25 mm bore 75mm long for tank connection, complete all as specified and as directed.

S &F in repairs CP body hygeine wash Jet spray assembly incl flexible PVC pipe, complete all as specified and as directed.

S &F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as per sample

S &F in repairs Sheet glass shelf assembly consisting of 6-8 mm thick sheet glass shelf 10-15cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S &F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

S &F in repairs CP Grating with or without hole (for waste Pipe) 100 mm dia, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling withexisting/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed

All as per item No 203.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 203.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 203.00 here-in-above but One light point controlled by two, two-way switches

All as per item No 203.00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed

All as per item No 208.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 208.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 208.00 here-in-above but One light point controlled by two, two-way switches

All as per item No 208.00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

Supply and fix switch piano flush type 6 amp single pole one way 230 Volts complete all as specified & directed .

Supply and fix switch piano flush type 16 amp single pole one way 230 V Complee all as specified & directed .

Supply and fix switch piano flush type 6 amp single pole two way 230 Volts complete all as specified & directed .

Supply and fix bell push AC, 230 Volts, 5 Amps complete all as directed.

Supply and fix socket out let flush type 6 amp 3/5 pin suitable for 6 Amp plug top 230 V complete all as specified & directed.

Supply and fix socket out let flush type 3/6 pin suitable for 16 Amp plug top multipurpose 230 V complete all as specified & directed.

Supply and fix bell AC ing dong type 230 volts incl taking down old unserviceable bell.

Supply and fix fan regulator electronic Switch/socket type complete all as specified and directed.

Supply and fixing lamp holder insulated body with back plate batten/angle type for batten fittings incl taking down old unserviceable holder complete all as specified and directed.

Supply and fixing in replacement ceiling rose 3 terminals complete incl taking down all as specified and directed.

Supply and fixing in replacement PVC cassing Capping tee,elbow,bend etc 20/25 mm dia ISI (MMS) incl taking down old unservecable cassing capping all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 63 to 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

Supply and Fix in replacement MCB Single pole"B" series 5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP .

Supply and Fix in replacement MCB Single pole & neutral "B" series upto 63. Amps ISI marked incl dismantaling old unserviceable MCB SPN

Supply and fixing in replacement MCB TPN B Curve 63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB

Supply and fix in replacement 6-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light all as specified and directed by Engr-in-charge

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified.

Supply and fixing in replacementLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing replacement LED lights fitting 1x 20W, 220V, Cool White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing in replcement LED lights fitting 1x 20W, 220V, Warm White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit surface in walls with all required accesries of conduit ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed

M & L in replacement Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal/hard/dense ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc, complete all as specified and directed.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/S IK CONSTRUCTION (BID ID -3124582)

Narendra General Suppliers (BID ID -3120278)

SNEH CORPORATION (BID ID -3125112)

BEYLIM INFRA (BID ID -3124915)