Repair/replacement of Internal Electrification at Birpur and Ghunghora of AGE E/M -II under GE Dehradun.

Amount

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light point point / bell buzzer point controlled by one-one way switch.

One ceiling fan/ Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No 2 above but one 3 pin socket outlet 15 Amp independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in existing PVC / Steel, concealed and existing MS boxes, mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following:- Note: The wiring to be done as per IE rule and maintain colour code accordingly

One light point point / bell buzzer point controlled by one-one way switch.

One ceiling fan/ Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

One light point controlled by two way switch

All as per item No 4 above but one 3 pin socket outlet 15 Amp independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed Wiring throgh surface PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories / casing & caping with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge Note: The wiring to be done as per IE rule and maintain colour code accordingly./ Steel, and MS boxes, mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge Note: The wiring to be done as per IE rule and maintain colour code accordingly

One light point point /bell buzzer point controlled by one-one way switch.

One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No 6 above but one 3 pin socket outlet 15 Amp independent, with cable 4 Sq mm size, with earth continuity coductor of size 4 Sq mm complete all as specified and directed.

Supply and fix switch piano flush, button type 5 Amp SP 250 V AC complete all as specified & directed.

Supply and fix switch piano flush button type 15 Amps SP 250 V AC complete all as specified & directed.

Supply and fix socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

Supply and fix socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete all as specified and directed.

Supply and fix Bell switch paino flush button type 5 Amp complete all as specified and directed.

Supply and fix ding dong bell AC 230 V single pole complete all as specified and directed .

Supply and fix switch paino flush button type 5 Amp SP 2 way complete 250 V AC all as specified and directed.

Supply and fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts complete all as specified and directed.

Supply and fix ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC complete all as specified and directed.

Supply and fix lamp holder,pvc/polycarbonate type with back platesuitable for batten fittings complete all as specified & directed.

Material and labour in repair sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

All as per item No18 above but size of 6 Sq.mm. and 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed

Material and labour in repair sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sq.mm. (nominal area) drawing in existing PVC / Steel concealed conduit. and one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 10 Sq. mm. as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain complete all as specified & directed.

All as per item No 20 above but size of 6 Sq.mm. and 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed

Material and labour in repair wiring with two single core PVC insulated and unsheathed cable with copper conductor 6 sqmm multi stranded (nominal area ) and drawing into suitable size of PVC conduit heavy duty including 6 sqmm PVC insulated copper cable green with earth wire and connected to earth terminal etc complete all as specified and directed by Engineer-in-Charge (Conduit and conduit accessories measured separately)

All as per item No 22 above but 10 sqmm, and 10 Sqmm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

Supply and fix in repair sheet metal enclosures 240 volt with 200 Amp rated bus bar for double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed.

All as per item No 24 above but 12 way complete all as specified and directed. .

All as per item No 24 above but 6 way complete all as specified and directed. .

All as per item No 24 above but 4 way complete all as specified and directed. .

Supply and fix in repair sheet metal enclosures 240 volt, Single Door 2 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and out going complete all as specified and directed.

Supply and fix in repair MCB double pole 240 Volt 10 KA 63 Amp 'B' series conforming to ISI marked complete all as specified & directed.

Supply and fix in repair MCB double pole 240 Volt 10 KA 40 Amp 'B' series conforming to ISI marked complete all as specified & directed.

Supply and fix in repair MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed.

Supply and fix in repair sheet metal enclosures Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed.

Supply and fix MCCB 415 Volt 16 KA 4 pole 125 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply and fix MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.

Supply and fix in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix in repair mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, Fixing and testing in repair LED down lighter recessed mounted 2x2 feet 36W ultra modern designed LED luminaire which provide soft light and glair free symmetrical illumination suitable for grid ceiling and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed all as specified and directed.

Supply and fix in repair high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Supply and fix in repair high efficiency LED bulbs 1 X 9 watt that can be used as a ready replacement for existing GLS ad CFL direct fit in holder complete all as specified and directed.

Material and labour in repair for service cable 10x2 sq mm twin core Weather proof aluminium multistranded conductor cable PVC sheathed complete all as specified and directed.

All as per Item No 42 but 6x2 sqmm complete all as specified and directed.

Supply and fix in replacement air ventilation fan matalic body 300mm, 900 RPM, single phase, 230V AC including necessary, Material and labour for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge. Note: old unserviveable fan shall be deposite in E/M yard.

Supply and fix in repair exhaust fan, steel body AC single Phase. 230V of size 450 mm, 900 RPM, single phase, 230V AC with louver all as specified and directed 30 mm sheet. including connection with twisted white three core flexible copper multistranded conductor cabl from ceiling rose to connector all a directed by Engineer-in-charge.

Supply, Fixing in repair & Connecting wall mounted fan oscillating type 400 mm sweep single phase 230 Volt complete all as specified and directed.( Note: Old unserviceable Exhaust fan will be deposited in E/M store yard. )

Material and labour in repair GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as specified and directed.

Supply and Fixing in repair Integral LED Bldg security Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.

Supply and fixing in repair of LED tube rod 18/20 Watts single or double sided connections polycarbonate complete incl making connection alteration in existing tube light fitting complete all as specified and directed.

Supply and fix in replacement of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed. ( Note: Old unserviceable ceiling fan will be deposited in E/M store yard. )

Supply and fix in replacement of 3 core PVC insulated copper cable of size 40/0.0076 multi standard in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement copper flexible wire hoisted twin cord 23/0076 for connection of ceiling fan etc. complete all as specified and directed.

Disconnecting electric connection and taking downhof ceiling fan / Exhaust fan removing capacitor,split pins of any sweep ceiling fan / Exhaust fans complete carefully for overhauling checking of bearings/bush, cleaning the fan blades with cleaning solution, replacing the unserviceable bearing, bush, capacitor , safety split pin and nuts, bolts, washer etc duly threaded of down rods (bush, bearing, capacitor, down rod, hanging clamps, will be paid under relevant item of the Sch 'A') reassembling the ceiling fan complete after greasing/servicing, oiling testing the same making the fan in serviceable condition ana refixing/ hanging the same complete all as specified and directed by Engineer-in-Charge . Note 1: Cost of Split pins, nut bolts and threading of down rod pipe rates are included in quoted rate

Supply and fix in repair standard ball bearing (No.6201 - 6202, & No.6203) suitable size of ceiling fans 1200/1400 mm sweep to suitable for different make of fans of approved quality including necessary greasing complete all as specified and directed.

Supply and fix in repair gun metal Bush suitable for ceiling fans /exhaust fan, cabin fan of any make any size complete all as specified and directed.

Supply and fix in replacement of old unsv armature shaft for ceiling fans of any make complete all as specified and directed.

Supply and fix in replacement rubber bushes and real type synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans complete all as specified and directed. .

Supply and fix in repair complete set MS clamp with nut, bolt, including washers, split pins and rubber real etc of appropriate size for hanging of ceiling fan complete all as specified and directed. .

Supply and fix in replacement split pins of galvanised iron 1/8" dia 2" long complete all as specified and directed.

Supply and fix in repair body screw and blade screw of ceiling fan off size complete all as specified and directed.

Supply and fix in repair nut bolts & washers of appropriate size for hanging of ceiling fan complete all as specified and directed. .

Supply and fix in repair fan hook split type fabricated out of 12mm dia steel bar of length 30cm duly painted with rod oxide old black paint complete all as specified and directed.

Supply and fix in replacement capacitor 2.5 MFD, 230 volts single phase incl necessary connection complete all as specified and directed. Make :- Asain//Usha/Baja/Havells.

All as per item No 63 above but 3.15 MFD complete all as specified and directed.

All as per item No 63 above but 4 MFD complete all as specified and directed.

Dismantling electric and water connection of the 25/50 ltr's geyser, taking down from its original position on ground, dismantling geyser complete such as removing tank from its outer body, removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing its thermostat, heating element, and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, rubber gasket & testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete and testing on completion all as directed by Engineer-in-Charge. (Heating element & Aparatus if require to be replaced shall be measured and paid separately) (Nut, bolts and hold fastners if require to be replaced shall be deemed to be included in the quoted rates of this item). Note: All repair shall be carried out on complaint basis and measurement will be made only once through out the contract period irrespective number of repair carried out in same Geyser. All repairs shall be carried out on complaint basis contractor shall be delay to the maintenance and collect complaint slip from concerned JE daily upto 11.00 Hrs

Supply and Fixing in repair heating element any type/size as per site requirement of capacity 2 KW ISI Marked complete all as specified and directed. Make:-Theta/Newton/Dasmesh/Bajaj

Supply and Fixing in repair thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make: Dashmesh/Indofors/Donfoss/Bajaj

Supply and fix in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot/ cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed. Make:- POLO/Havells/Prayag

Supply and Fixing in replair syphon assembly for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge. Make:- Dashmesh/Theta/Newton/Bajaj.

Supply and Fixing in repair pressure release valve as per existing make and size geyser spring loaded 15 mm dia complete all as specified and directed.

Supply and Fixing in repair rubber Gasket as per existing make/size site requirement suitable for 25/50 Ltr capacity geyser complete all as specified and directed.

Supply and fix in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed . ( Note: old unserviceable Geyser will be deposited in E/ M store yard )

Supply and fix in repair PVC enclosure with plug and socket one single pole MCB 240 volts 20 Amp complete all as specified and directed.

Supply and fix in repair plug top 3 pin 15 Amp in repair. ISI marked complete all as specified and directed.

Supply and fix in repair plug top 3 pin 5 Amp in repair. ISI marked complete all as specified and directed.

Material and labour in replacement sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, for sutable suitable size of 100x100mm including making good disturbed surface complete all as specified and directed.

All as per item No 77 above but 150 x 100 mm complete all as specified and directed.

All as per item No 77 above but 250x200 mm complete all as specified and directed.

All as per item No 77 above but 300x250 mm complete all as specified and directed.

Supply and Fixing in repair for sun mica sheet 3 mm thick fixing size 250x200 mm directed by Engineer-in-Charge (Make Hylum/Cona/ISI marked).

All as per item No 81 above but 100x100mm complete all as specified and directed.

All as per item No 81 above but 300x250 mm complete all as specified and directed.

All as per item No 81 above but 150 x 100 mm complete all as specified and directed.

Supply and Fixing in repair 3 core 1.5 Sqmm copper conductor cable in existing pole incl making holes for cable entry and exist near to light fitting and junction box complete all as directed.

Supply and fixing in repair Heavy duty PVC insulated multistrand Single Core copper conductor of Size 1.5 Sqmm complete all as specified and directed.

Supply and fixing in repair Heavy duty PVC insulated multistrand Single Core copper conductor of Size 2.5 Sqmmcomplete all as specified and directed.

Supply and fixing in repair Heavy duty PVC insulated multistrand Single Core copper conductor of Size 4 qmmcomplete all as specified and directed.

Supply and fixing modular switch 1 way 6A,1 module,230 volts complete all as specified and directed.

Supply and fixing modular switch 1 way 16A,1 module, 230 volts complete all as specified and directed.

Supply and fixing modular socket combination 6 A, 5pin,2 module ,230 volts complete all as specified and directed.

Supply and fixing modular socket combination 16 A,6 pin,2 module ,230 volts complete all as specified and directed.

Supply and fixing modular Fan step regulator, 120W,2 module ,230 volts complete all as specified and directed.

Supply and fixing bell push 1 module,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,1 or 2 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,3 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,4 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame,6 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 8 module ,230 volts complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 12 module ,230 volts complete all as specified and directed.

Supply and fixing Modular metal flush box 1 or 2 module complete all as specified and directed.

Supply and fixing Modular metal flush box 3 module complete all as specified and directed.

Supply and fixing Modular metal flush box 4 module complete all as specified and directed.

Supply and fixing Modular metal flush box 6 module complete all as specified and directed.

Supply and fixing Modular metal flush box 8 module complete all as specified and directed.

Supply and fixing Modular metal flush box 12 module complete all as specified and directed.

Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from strip of 32x6 mm earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of galvanised strip 32x6mm earth lead and 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item

All as per item No-107 here-in- above here in but earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm. bore and water pipe 20 mm. bore GI light grade with funnel and wire mesh, complete all as shown in elect plate No. 5 of SSR part I of 1991.

Supply and fix in repair aluminium strip 25x3mm fixed in ground,on wall, pole with epoxy based insulator for down conductor including drilling two Nos holes at each joint, one set of lead washers between strips two sets GI nut, bolt, washers one set of lead washers between strips two sets GI nut, bolts, washers gutties, screws etc

Supply and fix in repair Galvanised iron strip 32 x 6mm buried in ground complete all as specified and directed.

Supply and fix in repair air termination single pointed aluminium rod of 12mm dia 300mm long fixed to aluminium strip 25x3mm drilling nuts, bolts washers for resting/supporting of air terminals etc complete all as directed by Engineer-in-Charge.

Material and labour in repairTest point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, for incoming and out going aluminium strip for proper insulation etc complete all as specified and directed.

Material and labour in replacement of GI tubing medium grade, complete with all fittings for installation of post top Lantern fitting of 50 mm bore complete all as specified and directed.

Supply and fix in relacement LED decorative post top lantern for Garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) for coping pole including necessary Steel form work and finishing exposed faces of concrete smooth and even using extra cement complete all as specified and directed.

Material and labour in repair for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 2 terminals for terminating one incoming and outgoing UG cable of size 6/10 sqmm 2 core and fixed to the Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 nos of single pole MCBs 6-32 amps,10KA inside the box complete all as specified and directed.

Supply, laying, jointing and testing in repair of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size complete all as specified and directed.

All as per Item No 117 but 16 Sq mm, 4 core complete all as specified and directed.

All as per Item No 117 but 10 Sq mm, 2 core complete all as specified and directed.

Material and labour for excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

Material and labour for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Material and labour for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

Material and labour for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

Supply and laying in repair galvanised steel tubing 50 mm bore light grade laid in trenches or fixed to poles/walls etc for cable protection complete all as specified and directed.

GLIBS CONSTRUCTION (BID ID -3101533)

Friends fire Engineers (BID ID -3119732)

Tarachand gurudutt (BID ID -3104265)

M/S Garhwal Enterprises (BID ID -3119725)