SPECIAL REPAIRS TO THREE BATHROOMS AND KITCHEN OF BLDG NO T-01(EASTERN WING), T-245 AND T-230 OF 77 MTN BDE CAMP AT SECT 1A THAKURBARI AND CERTAIN LBW/MW WORKS AT AMARIBARI LOCATION UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm depth and getting out in soft/loose soil complete all as specified and directed.

Surface dressing n.exc 15cm deep soft/loose soil complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, Manhole, Pier holes, etc and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and directed.

Removing excavated materials(Soil) n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for hardcore of broken bricks of gauge not exceeding 63mm, deposited, spread and leveled in layer not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) in foundations,filing & mass concrete complete all as specified and directed.

M&L for PCC coping type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) finish even and smooth without using extra cement complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded crushedstone aggregate) in door cills, lintels bressumers, copings and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

Ditto as per item No-9.00 above but in landings, cover slabs for manholes and similar articles with palin faces complete all as specified and directed.

M&L for R.C.C 1:2:4 type B1 nominal mix (using 20mm graded crushed stone agg) as slab supported on walls, beams and colums complete all as specified and directed.

M&L for R.C.C 1:2:4 type B0 nominal mix (using 12.5mm graded crushed stone agg) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2,1:3:6(40mm graded aggregate) as in plinth protection ,footpath and making finished even and smooth without using extra cement.

M&L for 75 mm thick cement concrete type D-2,1:4:8(using 40mm graded crushed stone aggregate) as in sub base under floor complete all as specified and directed.

M&L for 40mm thick type B-1, 1:2:4 as in floor (using 20mm graded crushed stone aggregate) finished even and smoooth using extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2,1:2:4( using 40mm graded crushed stone aggregate) as in sub base under floor complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) to receive the top layer of tiles complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection making finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 ( using 40mm graded crushed stone aggregate) as in pathway complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipe complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0( using 12.5mm graded crushed stone aggregate) as in sub base of granite stone/tile floors complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick on rough finished surfaces of concrete complete all as specified and directed.

S&F M.S. TMT bars 8 to 10 mm dia bent to shape required including cranking bending and binding with M.S wire not less than 0.9mm dia complete all as specified and directed.

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides ) and hanging also fastening and fixing complete conforming to Fe-410-S complete all as specified and directed.

S&F Mild steel screw bolts(15mm dia) (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connectings plates conforming to Fe 410-W(Gde-E250 complete all as specified and directed.

S&F mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for foor frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in Cement sand mortar 1:6 complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in Cement sand mortar 1:4 complete all as specified and directed.

M&L for brickwork with sub class’B’ bricks, straight or curved on plan exc 6m mean radius in half brick work built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of bricks or on concrete surfaces finished even and smooth without using extra cement in Cement sand mortar CM(1:4) complete all as specified and directed.

M&L for 20mm thick plaster in cement sand mortar 1:2 damp proof course to horizontal or vertical surfaces with WPC including necessary formwork complete all as specified and directed.

M&L for 15mm thick plaster on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement in CM 1:4 complete all as specified and as directed.

M&L for rendering 10 mm thick plaster on fair faces of brickwork surfaces in cement mortar (1:6) making smooth and even surfaces without using extra cement complete all as specified and as directed.

M&L for Rendering or bedding layer 10mm thick in Cement Mortar 1:3 on Walls, etc for fixing tiles as in Skirting,Dados and vertical surfaces etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats cement base paints complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying three coats white wash complete all as specified and directed.

M&L for preparation of old distempered Surfaces by Washing, Rubbing Down and Stopping and applying one coat of oil emulsion distemper on wall complete all as specified and as directed.

M&L for praparation of by brushing rubbing down and stopping of painted surface ,(plastered or unplastered) old wall surfaces, incl chajjas, soffits of chajja, slab projection etc and applying one coats of cement based paint complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces incl cornices (plastered or unplastered) and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of surfaces of new wood and wood based materials,of any description,not otherwise described,over 10 cm width or girth, and applying with two coats of synthetic enamel paint over coat of pink primer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

S&F Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.06sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F coloured glazed ceramic tiles 200x 300x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F for Black Granite 18 to 20 mm thick machine cut slab as platforms and like in cm (1:4) including pointing with white cement (1:2) using marbal dusty mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F pre-painting galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding incl ridge hip etc fixed with tapping screws & L type or J type hooks etccomplete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F 3.00mm thick sheet figured glass, pin head type and glazing with oil putty in square n exc 0.50.m in each pane complete all as specified and directed.

S&F Sheet Glass, 3.0mm thick ordinary quality glazing with Beads or Oil Putty, not exc. 0.50 sqm in Each Pane, glass is ground or obscured or frosted on one side, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, panelling for plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down Chowkats or Frame, nexc 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frame) complete all as specified and as directed.

M&L for second class hard wood in scantlings (Timber fixed) wrought complete all as specified and directed.

S&F 500 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and directed.

Taking up or down Steel Water Tubing 15mm dia (Bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, and Stacking properly at Site(s) for re-use,complete all as specified and as directed

Taking up or down Steel Water Tubing 20mm dia (Bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

S&F 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 25mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 50mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 25mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 50mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) complete all as specified and directed.

S&F 20mm dia stop cock of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back,size 550x400mm (flat back or angle back type) including brackets, cutting for and pinning 'in brackets waste coupling, waste pipe,grating complete all as specified and directed.

S&F Vitreous china squatting pan,Orissa' pattern size 580x440 mm white with integral foot rests including connection to drain pipes and to flushing pipes antisy phonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed

S&F 15mm bore bib taps, chromium plated cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe complete all as specified and directed.

S&F 15mm bore stop valves/angle cock, fancy type, chromium plated cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F tubular towel rail, CP brass, 20mm dia 'D' type,60 cm long between flanges complete all as specified and directed.

S&F brass chromium plated toilet paper holder complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in cm 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe complete all as specified and directed.

S&F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe32mm dia and brackets complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends of radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints,fixed to wall complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends of radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F 100mm long medium weight cold rolled mild steel Butt hinges (ISI Marked) complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section (ISI Marked) complete all as specified and directed.

S&F 150mm long Aluminium handles cast type anodised (ISI Marked) complete all as specified and directed.

Cutting existing steel tubing 15mm bore for alterations or additions( Each cut measured) necessarily done in position without taking down complete all as specified and directed.

Cutting existing steel tubing 25 or 32mm bore for alterations or additions( Each cut measured) necessarily done in position without taking down complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar area n exc 150 Sqm cm complete all as specified and directed.

S&F Vitreous china wash down water colset pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F Brass CP, health faucet, for toilet use, 15mm bore and wall hook complete all as specified and directed. Make: Jaguar, Cat No. ALD-CHR-573 or its Equivalent.

S&F seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and directed.

S&F Vitreous china wash hand basin white flat back size 550 x 400 mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,32mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 as per requirement complete all as specified and directed.

S&F Soap dish,any type,fixed to plug with chromium plated brass screws complete all as specified and directed.

S&F 15mm dia Bib Taps, cast copper alloy, fancy type chromium plated Screwed down for high pressure, screwed for Iron Pipe or for Brass Ferrule complete all as specified and directed.

S&F stop cock 15mm bore fancy type chromium plated with long shank and, screwed down with high pressure cruth or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F chromium plated shower roses with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 100 mm long Butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised (ISI marked) complete all as specified and directed.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

Taking down Geyser of any capacity and Refixing of Geyser at same place or at other place with necessary connection and fiting complete all as specified and directed.

S&F single lever wall mixture complete all as specified and directed. Make: Jaguar, Cat No. KUP-CHR-35119PM or its Equivalent.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repair Vitreous China Wash Hand Basins, size 550mm X 400 mm (Flat Back or Angle Back type) including 32mm dia Brass Chromium Plated Waste Fitting, a Pair of CI Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed

S&F in repairs Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe complete all as specified and directed.

S&F in repair Brass chromium plated shower roses 125mm size with or without swiwel joints complete all as specified and as directed.

S&F Prelaminated particle board 18 to19 mm thick for cupboard interior grade,prelaminated one side with decorative and other side white lamination ,fixed with screw to timber frame complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete as all specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete as all specified and as directed.

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding, connection to trap and flush pipe complete all as specified and directed.

S&F in repairs PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar (1:3) complete all as specified and directed.

S&F in repairs vitreous china wash down water colset pan (semi-pedestal pattern)(Anglo indian type) white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F PVC Connections pipe 15mm, with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100mm long of extruded section (ISI marked) complete all as specified and directed.

S&F Aluminium handles, 100mm long cast type, anodised (ISI marked) complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed.

S&F 25mm bore Ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position (unframed work) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Maze overhead shower 240x240mm square shape single flow (body & face plate stainless steel with chrome finish)with rubit cleaning system complete all as specified and directed. Make: Jaguar, Cat No. OHS-CHR-1629 or its Equivalent.

E/M PORTION

Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the existing complete all as specified and directed.

M&L for point wiring for light/fan point controlled by one, one way switch/bell push using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated sheathed cables in and including casing & capping of suitable size with fittings complete fixed to wall/ceiling including PVC boxes factory made confirming to IS-14772-20000 for mounting of switches/sockets/regulators/bell push etc normal/modular type and1.5 Sq mm nominal cross sectional area multistranded copper conductor PVC insulated sheathed earth wire and connecting to earth dolly by means of screws, washers etc complete all as specified and directed.

M&L for point wiring for one 3 pin socket outlet 5 amps on independent board using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated sheathed cables in and including casing & capping of suitable size with fittings complete fixed to wall/ceiling including PVC closed recessed boxes modular type for mounting of modular type switches/sockets etc and1.5 Sq mm nominal cross sectional area multistranded copper conductor PVC insulated sheathed earth wire and connecting to earth dolly by means of screws, washers etc complete all as specified and directed.

M&L Point wiring for one 3 pin socket outlet 15 amps on independent board using 2.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated sheathed cables in and including casing & capping of suitable size with fittings complete fixed to wall/ceiling including PVC boxes factory made confirming to IS-14772-20000 for mounting of switches/sockets etc and 2.5 Sq mm nominal cross sectional area multistranded copper conductor PVC insulated sheathed earth wire and connecting to earth dolly by means of screws, washers etc complete all as specified and directed.

S&F Polycarbonate Switch piano flush type,SP,6 Amps,one way complete all as specified and directed.

S&F Polycarbonate switch socket out let 2 in 1 socket 5 pin, 5&15 amps flush type complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F white cover plate with frame, 4 module complete all as specified and directed.

S&F white cover plate with frame, 6/8 module complete all as specified and directed.

S&F metal flush box 3 module complete all as specified and directed.

S&F metal flush box 6 module complete all as specified and directed.

S&F modular switch socket Combination 16A, 6 pin, 3 module complete all as specified and directed.

S&F lamp holder, insulated body, angle holder PVC/Polycarbonated type with back plate complete all as specified and directed.

S&F 10W LED new adore 10W B22 cool day light ball lamp all as specified and directed. Make:- Havells Cat No- LHLDERUEML8X010 or Equivalent in Phillips/Wipro/Bajaj.

S&F Environmental friendly ultra modern energy saving surface mounted decorative round plastic bulk head LED bulk head luminaries suitable for 10 watts LED 6000K and connecting up electrically complete all as specified and as directed. Make : Havells Ordering code RUGBYNEONFT10WLED760SSYMBOPC or Equivalent in Phillips/Wipro/Bajaj.

S&F surface and wall mounted E-lite LED Curve with wide angle profile high lumen with efficiency of 100 llumens batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate housing & integrated electronic driver including LED tube light 20 watt 4 feet complete all as specified and directed. Make: Havells Cat No-LHEXBXPN IN1W020 or equivalent in Phillips/Wipro/Bajaj.

S&F in repair wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver lamp type 10 watt 6000K complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed.

M&L for submain wiring with two runs of PVC FRLSH insulated multistranded, copper coductor of size 4 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable of 4 Sq mm solid strand cable drawn in and including PVC casing caping of suitable size alongwith aceessories complete all as specified and as directed. Note:- 2 run of 4sqmm cable & 1 run of 4sqmm earth wire and one run of casing capping shall be measured and paid as one length.

S&F in repair sheet metal enclosure MCB DB double door 8 ways with 200 Amps rated bus bar SPN complete all as specified and directed.

S&F in repair sheet metal enclosure MCB DB double door 4 ways with 200 Amps rated bus bar SPN complete all as specified and directed.

S&F MCB single pole 6 amps to 32 amps , C- series complete all as specified and directed.

S&F MCB single pole & neutral 240 volts 5/6 to 30 Amps, 10 KA , C Series complete all as specified and directed.

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers complete all as specified and directed.

S&F Water heater storage type, electric,capacity 25 litres BEE 5 star rated including taking down old unsv storage water heater of any make/capacity and depositing to MES store yard complete all as specified and directed. Note: The Transportation charge for depositing Geysers upto MES store yard is deemed to be included in unit quoted rate.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as specified and directed.

Material and labour for house service bracket (hook type) complete with 3 mtrs long GI pipe 40mm dia, medium grade, 2 Nos 90 degree MS hook and stay or gay on the wall by grouting cement mortar and make good all disturbed surfaces.

M&L for one twin core cable flat or circular, 1100 volts grade heavy duty cable, PVC insulated, with stranded aluminium conductor, size 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating in service hangers not more than 1 metre apart including 4mm GI suspension wire, and including taking down of unserviceable service connection complete all as specified and directed.

Supply,installation and testing wall mounted fan 400mm sweep complete single phase 230 volts single phase 50Hz including making connection with copper flexible cable of suitable size. Make : Havells Model : Platina remote wall fan (white) of equivalent of Bajaj/Usha/Orient/Crompton Greaves.

S&F Isolator SPN 40 Amps complete all as specified and directed.

M&L for sub main wiring alongwith with two single run of FRLSH PVC insulated copper conductor multi stranded single core 1100 volts grade cable of nominal dia 2.5 sqmm drawn in and including pvc casing and caping of suitable width/size complete with all accessories drawn in surface including single run of 2.5 sqmm single core multi stranded FRLSH copper cable of green colour and making necessary electrical connection with distribution boardcomplete all as specified and directed. Note:- 2 run of 2.5sqmm cable & 1 run of 2.5sqmm earth wire and one run of casing capping shall be measured and paid as one length.

Raj Enterprise