REPAIRS TO INTERNAL WIRING INCLUDING FITTINGS /FIXTURES TO JCOs /OR Md ACCN UNDER GE MISAMARI

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes, complete all as specified and directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Concealed Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item No 4 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator,complete all as specified and as directed.

All as per Item No 4 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and as directed.

All as per Item No 4 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed.

All as per Item No 4 here in before but for one bell point controlled by one, bell switch 5 Amps, complete all as specified and as directed.

All as per Item No 4 here in before but for one light point controlled by one, two way switch 5 Amps, complete all as specified and as directed.

All as per Item No 4 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item No 11 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator, complete all as specified and as directed.

All as per Item No 11 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and as directed.

All as per Item No 11 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed.

All as per Item No 11 here in before but for one bell point controlled by one, one way bell switch 5 Amps, complete all as specified and as directed.

All as per Item No 11 here in before but for one light point controlled by one, two way switch 5 Amps , complete all as specified and as directed.

All as per Item No 11 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as specified and as directed.

M&L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Casing Caping ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.

S&F switch piano (White) single pole flush type 5 amps, 230 volts, complete all as specified and directed.

Fixing only switch piano single pole flush type 5 amps, 230 volts obtained from item No 1 above, complete all as specified and directed.

S&F in replacement switch piano (White) single pole flush type, two way, 5 amps, 230 volts, complete all as specified and directed.

S&F in replacement bell push (White) flush type 5 amps, 230 volts, complete all as specified and directed.

S&F in replacement socket (White) flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts, complete all as specified and directed.

Fixing only socket flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts obtained from item No 1 above complete all as specified and directed.

S&F in replacement switch socket combination (White) flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts, complete all as specified and directed.

Fixing only switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts obtained from item No 1 above, complete all as specified and directed.

S&F in replacement switch socket combination (White) 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and directed. .

S&F in replacement Switch (White)15 amps flush type complete all as specified and directed..

S&F in replacement Socket (White) 15 amps flush type, complete all as specified and directed.

Fixing only switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type obtained from item No 1 above complete all as specified and directed.

S&F in replacement ceiling rose (White) three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

Fixing only ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm obtained from item No 1 above, complete all as specified and directed.

S&F in replacement ceiling fan regulator (White) step type, flush type heavy duty suitable to work on 230 volts Ac supply, complete all as specified and directed.

Fixing only ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply obtained from item No 1 above, complete all as specified and directed.

S&F in replacement lamp holder (White) insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblocks, complete all as specified and directed.

Fixing only lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks obtained from item No 1 above, complete all as specified and directed.

S&F call bell suitable to work on 230 volts AC supply including removal of old unsv call bell, complete all as specified and directed.

S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen, complete all as specified and directed. Make : Cat No. LHLDEUEBML8Z010 of Havells, or equivalent in Crompton/ Bajaj

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete including removal of old unsv sheet metal enclosure, complete all as specified and directed. Make : Model No. DBSPN008DD of L&T or equivalent in Schneider/Indo asian/Legrand

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure, complete all as specified and directed.Make : Model No. DBTPE004DD of L&T or equivalent in Schneider/Indo asian/Legrand

S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed. Make : Model No. BB40630C of L&T or equivalent in Schneider/Indo asian/Legrand

S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 40 Amps, complete all as specified and directed. Make: Model No. BB20400C of L&T or equivalent in Schneider/Indo asian/Legrand

S & F MCB SP 6 to 32 Amps C-Series 240 volts for fixing on MCB DB's complete all as specified and directed. Make : L&T/Schneider /Indo asian/Legrand

S&F wall mounted LED 18 watts, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting for LED tube 4'' x 18 watts complete including dismantling the existing unserviceable fitting, complete all as specified and directed.

S&F wall mounted LED 18 watts, 4 feet, Batten slim type (Daylight 5000K) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fittingcomplete including dismantling the existing unserviceable fitting, complete all as specified and directed.

S&F Ultra bright LED T8 Tubelight 18 watts (single side connection) with very high efficacy with built in driver with metal Heat sink suited for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting, complete all as specified and directed.

S&F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provosion of LED bulb 09/10 watts complete incl removal of old unsv fitting, complete all as specified and directed.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15/20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting, complete all as specified and directed.

S&F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete incl removal of old unsv fitting ,complete all as specified and directed.

S&F ceiling fan capacitor 2.5 mfd/ 2 mfd/3.15 mfd as per site requirement heavy duty with metal body including removal old existing unsv one, complete all as specified and directed.

Taking down the existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed. Note : Earthwork will be measured and paid seperately.

Relaying Faulty LT UG XLPE cable of size 3.5 core x 35/50 sq mm laid in trenches/ floors/ on wall/ service connections after cutting and jointing through Cable Joint kit as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.

All as per item No 52 here in before but for cable size 25 Sqmm 4 core, complete all as specified and directed .

Supply & laying incl replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 35 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, will be measured and paid under relevant items.

All as per Item No.54 here-in-above, but 25 Sqmm x 3.5 Core, Complete all as specified and as directed.

All as per Item No.54 here-in-above, but 16 Sqmm x 2 Core, Complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable, complete all as specified and directed.

Returning, filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils, complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection, complete all as specified and directed.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable, complete all as specified and directed. Note : Punned thickness only will be measured and paid.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore, complete all as specified and directed .

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 10 Sqmm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm supension wire , twin core cable flat or circular cable incl taking down old unsv cable, complete all as specified and directed .

S&F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 1.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed .

S&F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 2.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed .

S&F 1100 volts grade PVC insulated stranded Flexible Copper conductor twin core of 1.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed .

S&F PVC Square Box of Size 7'' x 4'' including replacement of old UNSV one, complete all as specified and directed.

S&F PVC Square Box of Size 8'' x 6'' including replacement of old UNSV one, complete all as specified and directed.

S&F PVC Square Box of Size 4'' x 4'' including replacement of old UNSV one, complete all as specified and directed.

Supply only PVC wide Insulation Tape, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed. Notes : The unit rate includes for protection pipe and GI wire 4.00mm dia from top of earth plate up to 5.00 meter above ground level.

M/S S.S.Corporation

Maa Mira Enterprise

shree kamakhya traders

M/S RANA ENGINEERING ENTERPRISE

M/S Mahabir Traders

United Traders

bkgeneralstores

M/S Singha Enterprise