PM ABHIM

Name of the Work:Construction of Village Health Clinic Building with Compound Wall at Antharvedi Kara (V) of Sakhinetipalli (M): Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) including overhead charges & Contractors profit but excluding GST

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to stie and all operational, incidental, labour charges, ,hire charges of T&P etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges. (APSS No 309 &310)

Filling with Stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to stie and all operational, incidental, labour charges, ,hire charges of T&P etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges. (APSS No 309 &310)

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (Cement:fine aggregate:Coarse aggregate) using 40mm size (SS5) hard Blasted Granite (IS383:1970) metal from approved quarry including cost and conveyance of all materials like Cement, Sand, coarse aggregate, water etc to site, incluidng all operational,incidental,and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface,curing concrete etc.., complete including overhead charges & Contractors profit but excluding GST and seignorage charges. For Foundation(APSS No. 402)

Plain Cement Concrete (1:2:4) using 20 mm metal hard Blasted Granite (IS383:1970) metal from approved quarry incluidng cost and conveyance of all materials like Cement, Sand, coarse aggregate, water etc to site, incluidng all operational,incidental,and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface,curing concrete etc.., complete including overhead charges & Contractors profit but excluding GST and seignorage charges. For Verandah(APSS No. 402)

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Footings

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Pedestals

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Plinth Beam

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Columns

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Roof Beams

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. For RCC Slab 125mm thick

RCC M-20 Nominal mix(Cement:fine aggregate:coarse aggregate) corresponding to Table 9of IS 456 using 20mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate,water etc.,to site and including all operational,incidental and labour charges such as machine mixing,laying concrete,curing ect., complete but excluding cost of steel and its frabication charges for finished item of work,but excluding centering and shuttering. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Lintels

RCC M-20 Nominal mix(Cement:fine aggregate:coarse aggregate) corresponding to Table 9of IS 456 using 20mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate,water etc.,to site and including all operational,incidental and labour charges such as machine mixing,laying concrete,curing ect., complete but excluding cost of steel and its frabication charges for finished item of work,but excluding centering and shuttering. including overhead charges & Contractors profit but excluding GST and seignorage charges. For Sunshades

RCC M-20 Nominal mix(Cement:fine aggregate:coarse aggregate) corresponding to Table 9of IS 456 using 20mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate,water etc.,to site and including all operational,incidental and labour charges such as machine mixing,laying concrete,curing ect., complete but excluding cost of steel and its frabication charges for finished item of work,but excluding centering and shuttering including overhead charges & Contractors profit but excluding GST and seignorage charges..For Septic tank slab 100mm thick

RCC M-20 Nominal mix(Cement:fine aggregate:coarse aggregate) corresponding to Table 9of IS 456 using 20mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate,water etc.,to site and including all operational,incidental and labour charges such as machine mixing,laying concrete,curing ect., complete but excluding cost of steel and its frabication charges for finished item of work,but excluding centering and shuttering. including overhead charges & Contractors profit but excluding GST and seignorage charges. For RCC Pre cast 100mm Thick slab

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, fine sand (screened), water proofing compound, water etc., to site,including all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges. (APSS No. 901 & 903)

Brick Masonry 230 mm thick for panel walls in superstructure with CM (1:6) proportion using 2nd class country bricks of size 23x11x7cm from approved source having crushing strenghth not less than 35kg/sqcm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all operational, incidental and labour charges such as mixing cement mortar, curing charges,constructing masonry, scaffolding cahrges, lift charges, curing etc., complete for finished item of work (APSS No 501& 504) including overhead charges & Contractors profit but excluding GST and seignorage charges. For Basement

Brick Masonry 230 mm thick for panel walls in superstructure with CM (1:8) proportion using 2nd class country bricks of size 23x11x7cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all operational, incidental and labour charges such as mixing cement mortar, curing charges,constructing masonry, scaffolding cahrges, lift charges, curing etc., complete for finished item of work (APSS No 501& 504) including overhead charges & Contractors profit but excluding GST and seignorage charges. For Super Structure

Reinforced Brick Masonry walls of 11.5cm in CM(1:6) using FlyAsh/2nd class country bricks having crushing strength not less than 35kg/sqcm and using two mild steel bars of 6m dia in every third layer of brick masonry,with free joints of the main block work including cost and conveyance of all materials and water from approved souurces to worksite and all operational, incidental and labour charges such as scaffolding mixing mortar, constructing masonry lift charges, curing etc., complete for but excluding the cost of steel and its fabrication charges for finished item of work as per (APSS 509) including overhead charges & Contractors profit but excluding GST and seignorage charges.

Flooring with virtified tiles 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.,complete for finished item of work, but excluding the cost of conveyance of all materials. including overhead charges & Contractors profit but excluding GST and seignorage charges.

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges.

Flooring with Non-skid ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete,for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges.

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and seignorage charges.

Roof sloping with terracota tiles of size 200x125mm, set over base coat of cement mortar(1:3) 12mm,thick over RCC Roofing 125mm thick and course of Terracota Tiles including all charges including overhead charges & Contractors profit but excluding GST and seignorage charges.

Plastering with CM (1:5) to 12mm thick including cost and conveyance of all materials and all labour charges,mixing mortar,scaffolding,lift charges,curring etc.,for finished item of work. including overhead charges & Contractors profit but excluding GST and seignorage charges. for Internal Walls

Plastering with CM (1:6)8mm thick and CM(1:4) 4mm thick including cost and conveyance of all materials and all labour charges etc complete including overhead charges & Contractors profit but excluding GST and seignorage charges.

Ornamental Plastering 8mm thick for Ceiling in CM (1:3) including cost and conveyance of all materials and all labour charges etc., complete including overhead charges & Contractors profit but excluding GST and seignorage charges.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work including overhead charges & Contractors profit but excluding GST for Internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work including overhead charges & Contractors profit but excluding GST. for external walls - excluding cost of access scaffolding

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification. including overhead charges & Contractors profit but excluding GST

Painting to new walls with 2 coats of Plastic Emulsion paint over a primary coat of water based cement primer Interior Grade of approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all material to work site and all operational,incidental,labour charges etc., complete for finished item of work.APSS 911 including overhead charges & Contractors profit but excluding GST For Internal Walls

Painting to new walls with 2 coats of Plastic Emulsion paint over a primary coat of water based cement primer Exterior Grade of approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all material to work site and all operational,incidental,labour charges etc., complete for finished item of work.APSS 911 including overhead charges & Contractors profit but excluding GST For External Walls

Painting to New Wood work with 2 coats of ready mix first quality synthetic enamel paint of approved brand over primary coat of wood primer after throughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all material,cost of brushes,water to work site etc., and labour charges,curing etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST

Painting to New Iron work with 2 coats of ready mix first quality synthetic enamel paint of approved brand over primary coat of red oxide after throughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all material,cost of brushes,water to work site etc., and labour charges,curing etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supplying,fitting,and placing HYSD bar reinforcement complete as per drawings and technical specifications foe Bars below 36mm dia including over laps and wastage,where they are not welded,cutting,bending to required size and shapes placing in position with cover blocks of approved size and binding wire of 20 SWG forming grills for reinforcement work as per approved desings and drawings including cost and conveyance of bars from approved sources to site of work with all taxes,including cost of binding wire,cover blocks,chains,overlaps,spacess dowels wastage etc., and all operational charges and all labour charges etc., complete for finished item of work. including overhead charges & Contractors profit but excluding GST

Supply and fixing of Sal wood framed Flush shutter door of size 1.05 x 2.10mt with double flush shutters as per approved of 30mm thick solid bond wood block borad type with teak veneer on one face and commercial ply on another face(One side Teak) Teak wood internal lipping including fixing of MS Z hold fats,MS butt hinges,MS tower bolts,Aldrops-300mm long,MS Door handles & door stopper including fixing the fixtures to door with required no.of screws,bolts and nuts including labour charges for fixing the frame in position,fixing the shutter to the frame etc., complete for finished item of work (APSS NO.1001 & 1002) including overhead charges & Contractors profit but excluding GST

Supply and fixing of Sal wood framed Flush shutter door of size 0.90 x 2.10mt with double flush shutters as per approved of 30mm thick solid bond wood block borad type with teak veneer on one face and commercial ply on another face(One side Teak) Teak wood internal lipping including fixing of MS Z hold fats,MS butt hinges,MS tower bolts,Aldrops-300mm long,MS Door handles & door stopper including fixing the fixtures to door with required no.of screws,bolts and nuts including labour charges for fixing the frame in position,fixing the shutter to the frame etc., complete for finished item of work (APSS NO.1001 & 1002) including overhead charges & Contractors profit but excluding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge.Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window upto 1.75). including overhead charges & Contractors profit but excluding GST

Cost,supply and fixing of Welded Iron gate using M S Flat,squares etc.,including cutting,welding,and fixing charges etc., complete-1kg including overhead charges & Contractors profit but excluding GST

Supplying and fixing of R.C.C Precasted Jalis 50mm thick for ventilators including cost and conveyance of all materials and labour charges etc., completed including overhead charges & Contractors profit but excluding GST

Providing and fixing factory made solid wood polymer composite(WPC) single extruded Door frame section of size with encapsulation of 8mm rigid layer on all the six surfaces.The door frame will have a rebat of 32mm door frame section of 45x75mm.The two vertical members are to be joined todether with the horizontal member using 8x50mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine.The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners.A minimum of 4no's of screws to be provided for each vertical member & minimum 2 no's for horizontal member including overhead charges & Contractors profit but excluding GST

Providing and fixing 28-30 mm thick solid wood polymer composite(WPC) single extruded door dhutter with 3mm top and bottom rigid layer with an overall density of 750kg/cum.It will be fixed to the frame using 3 inch/4 inch hinges.A minimum of 4 hinges will be required for fixing the door with the frame including overhead charges & Contractors profit but excluding GST

Electrification Supply and fixing of 25mm dia 1.80/2.00mm thick PCV Pipe (ISI MARK) concealed in Roof slab with all required accessories including masonry work and labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and fixing of 25mm dia 1.80/2.00mm thick PCV Pipe (ISI MARK) concealed in wall with all required accessories including masonry work and labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and fixing of 20mm dia 1.5mm thick PCV Pipe (ISI MARK) concealed in wall with all required accessories including masonry work for light,fan and separate plug with well seasoned wooden deep box including labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Modular plate covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including overhead charges & Contractors profit but excluding GST

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete including overhead charges & Contractors profit but excluding GST .

Supply and Fixing of 16A/20A 3pin and 6A 3pin plug socket and 16A switch control duly recessed in wall with metal deep box of covered with modular covering plate including earth connections and all labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and run of 2 of 22/0.3mm(1.5 sq.mm) FR P.V.C insulated flexible copper cable in existing pipe foe eath continuity including all labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and run of 1 of 22/0.3mm(1.5 sq.mm) FR P.V.C insulated flexible copper cable in existing pipe foe eath continuity including all labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and run of 2 of 36/0.3mm(2.5 sq.mm) FR P.V.C insulated flexible copper cable in existing pipe foe eath continuity including all labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and run of 2 of 56/0.3mm(4 sq.mm) FR P.V.C insulated flexible copper cable in existing pipe foe eath continuity including all labour charges etc., complete. including overhead charges & Contractors profit but excluding GST

Supply of 1200 mm (48") sweep 230V,A.C 50 Hz.Ceiling fan with 3 blades and double ball bearings with all standard accessories. including overhead charges & Contractors profit but excluding GST

Supply and erecting step type Modular regulator for ceiling fans 1200mm sweep complete erected on existing board. including overhead charges & Contractors profit but excluding GST

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Wipro / Phillips /Lighting Technologies(LT) / GEVenture / Crompton / Bajaj / VIN /Halonix/Jaquar/HPL/Havells/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG. including overhead charges & Contractors profit but excluding GST

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 18W pin type CFL Lamp (for new installation). including overhead charges & Contractors profit but excluding GST

Supply and fixing SPN Distribution board with IP-20 protection (Metal Door) suitable for single phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. including overhead charges & Contractors profit but excluding GST

Supply and Transportation of 1 HP Single phase ISI Mono block CI body motor pumpset (25x25mm). Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 as per SSR including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (3 Modular Box) including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (4 Modular Box) including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (8 Modular Box) including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (12 Modular Box) including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (16 Modular Box) including overhead charges & Contractors profit but excluding GST

Supply of Hot dip Galavanised metal boxes (18 Modular Box) including overhead charges & Contractors profit but excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters. including overhead charges & Contractors profit but excluding GST

Supply and run of 4 of 16sq.mm WPSC Aluminium cable along with no.10 SWG G.I bearer wire through PVC Cleats with all accessories including labour charges etc., complete for service including overhead charges & Contractors profit but excluding GST

Water Supply & Sanitation Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap of approved make including cost and conveyance of all materials and labour charges etc., complete including overhead charges & Contractors profit but excluding GST

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components of approved make including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 of approved make including cost and conveyance of all materials and labour charges etc., complete including overhead charges & Contractors profit but excluding GST

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm including overhead charges & Contractors profit but excluding GST

Supplying & Fixing 75 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete. including overhead charges & Contractors profit but excluding GST

Supplying & Fixing 90 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete. including overhead charges & Contractors profit but excluding GST

Supplying & Fixing 110 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete. including overhead charges & Contractors profit but excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST 28.60mm OD Pipe(25mm DN)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST 22.20mm OD Pipe(20mm DN)

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including overhead charges & Contractors profit but excluding GST

Supply and Fixing of 12.7mm N.P bib tap Indian make including cost and conveyance of all materails and labour charges etc complete. including overhead charges & Contractors profit but excluding GST

Supply and Fixing of 12.7 mm brass stop cock Indian make heavy duty Ist quality including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST

Supply and fixing of 25mm Gunmetal (GM) Ball valve with SS Ball and SS Spindle Indian make heavy type including cost and conveyance of all materials and labour charges etc complete including overhead charges & Contractors profit but excluding GST

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size including cost and conveyance of all materials and labour charges etc including overhead charges & Contractors profit but excluding GST complete

Supply and fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated including overhead charges & Contractors profit but excluding GST

Supply and fixing of 110 mm dia- Vent Cowl- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 110 mm dia- Single Tee- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 110 mm dia- Plain Bend 87.5 Degree- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work

Supply and fixing of 110 mm dia- Door Bend 87.5 Degree- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 110 mm dia- Single 'Y' with Door- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 110 mm dia- 45 Door Bend - UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- Single Tee- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- Plain Bend 87.5 Degree- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- Door Bend 87.5 Degree- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- 45 Degree Bend- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- Single 'Y' with Door- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 75 mm dia- Vent Cowl- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Supply and fixing of 90 mm dia- Plain Bend 87.5 Degree- UPVC/SWR Pipe fittings(Prince/Sudhakar/Kisan/Supreme or anay ISI brand) including cost and conveyance of all materials to site,all labour charges complete for finished item of work including overhead charges & Contractors profit but excluding GST

Drilling for bore 50 o 100mm diameter in all soils except hard rock standing water then insering GI/PVC pipe to a finished dia of 50mm to 65mm with hand bore set including fixing of pipes specials and all labour charges but excluding cost of pipes and specials etc. as per approved for RWS dept including overhead charges & Contractors profit but excluding GST

Supply and Fixing 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete including overhead charges & Contractors profit but excluding GST