Construction of a protective wall (RCC pre-cast retaining wall) along the right side of Abu Nala, extending from Mangal Pandey Nagar Bridge to the vicinity of Rajrajeshwari Mandap in Ward No. 59.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

1:4:8 (1 Cement : 4 coarse sand (zone-ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; including the cost of centering, shuttering, finishing but excluding reinforcement as per direction of the engineer-in-charge, for the following grades of concrete: Concrete of M30 grade with minimum cement content of 350 kg /cum ("The quoted rates are inclusive of the cost of detailed design, structural drawings, and proof checking by a reputed/recognized institution.") Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. ("The quoted rates are inclusive of the cost of detailed design, structural drawings, and proof checking by a reputed/recognized institution.")

Dewatering with centrifugal pump with POL and pump operator for 8 working Hour per Day. (Rate Rs. 40.00 Per Hour/Per HP)