CA NO GE SOUTH AMB 57 2021 2022 REPAIR AND POLISHING TO LOCKER BED SIDE DOWN DESK WITH DIAS TABLE DRESSING TRESSLE STORE ROOMS, CHAIR CBA SPL WITH HAND REST AND OTHER MISC FURNITURE OTM AND MD ACCN UNDER AOR OF GE SOUTH AMBALA CANTT

Amount

LOCKER BED SIDE WOODEN (FD-54 (M) & 222) Taking out unserviceable back plywood from locker bedside wooden and supply and fixing new back plywood made of 6mm thick plywood commercial exterior grade BWR all as shown in drg complete all as specified and directed.

Taking out unserviceable shelves form locker bed side wooden and supply and fixing new shelves made of 18mm thick block board commercial exterior grade BWR all as shown in drg complete all as specified and directed.

Taking out unserviceable side from locker bedside wooden and supply and fixing new side made of 18mm thick block board commercial one side teak face exterior grade matching with the existing shape & size all as shown in drg complete all as specified and directed.

Taking out unserviceable top/bottom from locker bed side wooden and supply and fixing new top/bottom made of 18mm thick block board commercial one side teak face exterior grade all as shown in drg complete all as specified and directed.

Taking out unserviceable shutter from locker bedside wooden and supply and fixing new shutter made of 18mm thick block board commercial exterior grade BWR one side teak face including appropriate size of hinges, hasp & staple and handle etc all as shown in drg complete all as specified and directed.

Taking out unserviceable leg from locker bedside wooden and supply and fixing new leg made of seasoned 1st class hard wood matching with the existing shape & size all as shown in drg complete all as specified and directed.

DESK WITH DIAS (FD-107 / 1021) Material and labour in replacement for Box of Desk (Top, Bottom, Back, Sides) shall be 18/19mm thick Prelaminated particle board (exterior grade), ISI marked, (Shade and texture natural teak) and 4mm thick half round first class teak wood edging all around the top of desk complete all as shown in drg complete all as specified and directed.

Material and labour in replacement for leg of desk with 25 mm dia MS tube of wall thickness 1.6 mm including necessary cutting, welding etc, all as shown in drg complete all as specified and directed.

Material and labour in replacement for centre stiffener and long rail of desk with 25 mm dia MS tube of wall thickness 1.60 mm including necessary cutting, welding etc all as shown in drg complete all as specified and directed.

Material and labour in replacement for short stiffener and short rail of desk with 25 mm dia MS tube of wall thickness 1.60 mm including necessary cutting, welding etc, all as shown in drg complete all as specified and directed.

Material and labour in replacement for hard rubber shoe of desk of black colour as per existing as approved all as shown in drg complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (FD-230,379 & 31) Taking out unserviceable drawers from table dressing gents and supply and fixing new drawers made of 12 mm thick well seasoned 1st class hard wood except bottom of drawers which shall be of 6 mm thick ply wood commercial exterior grade BWR & front of drawers shall be made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR all as shown in drg complete all as specified and directed.

Taking out unserviceable top from table dressing gents and supply and fixing new top made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top all as shown in drg complete all as specified and directed.

Taking out unserviceable bottom from table dressing gents and supply and fixing new bottom made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top all as shown in drg complete all as specified and directed.

Taking out unserviceable side from table dressing gents and supply and fixing new side made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching with the existing shape & size all as shown in drg complete all as specified and directed.

Taking out unserviceable looking mirror from table dressing gents and supply and fixing new looking mirror 5.5mm thick of size 2'-6"x1'-3" free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc all as shown in drg complete all as specified and directed.

TABLE DRESSING LADIES WITH MIRROR (FD-251, 378 & 32) Taking out unserviceable drawers from table dressing ladies and supply and fixing new drawers made of 12mm thick well seasoned 1st class hard wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR & front of drawers shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR including knob etc all as shown in drg complete all as specified and directed.

Taking out unserviceable top from table dressing ladies and supply and fixing new top made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top all as shown in drg complete all as specified and directed.

Taking out unserviceable bottom from table dressing ladies and supply and fixing new bottom made of 18mm thick pre-laminated particle board one side teak face exterior grade duly covered with 4mm thick teak wood beading all around the top all as shown in drg complete all as specified and directed.

Taking out unserviceable side from table dressing ladies and supply and fixing new side made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching with the existig shape & size all as shown in drg complete all as specified and directed.

Taking out unserviceable looking mirror from table dressing ladies and supply and fixing new looking mirror 5.5 mm thick 355 mm x 1220 mm free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc size all as shown in drg complete all as specified and directed.

Taking out unserviceable plain glass pane and supply and fixing new plain glass pane 4 mm thick & standard aluminium channel having two 'U' shaped channel for sliding matching with the existing shape & size all as shown in drg complete all as specified and directed.

REPAIRS TO TRESTLE STORE ROOM WOODEN (FD-86) Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken/unserviceable long rail and supply and fixing of new well seasoned 1st class hard wood long rail of size 2440 mm x 100 mm x 100 mm all as shown in drg complete all as specified and directed.

Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned 1st class hard wood leg of size 405 mm x 100 mm x 100 mm all as shown in drg complete all as specified and directed.

Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable stiffener and supply and fixing of new well seasoned 1st class hard wood leg of size 1980mm x175mm x100mm all as shown in drg complete all as specified and directed.

HAT STAND WITH MIRROR (FD-23 & 261) Material and labour in replacement for looking mirror of size 440 mm x 300 mm x 5.5 mm of approved quality duly fixed with beading of size 35 mm x 6 mm made out of well seasoned 1st class hard wood duly finished all as shown in drg complete all as specified and directed.

Material and labour in replacement for aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as shown in drg complete all as specified and directed.

Material and labour in replacement for MS plate for hanging of hat stand as per approved sample shall be fixed to the back of the hat stand all as shown in drg complete all as specified and directed.

Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand all as shown in drg complete all as specified and directed.

Material and labour in replacement for plywood 6 mm thick commercial confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown in drg complete all as specified and directed.

Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head ess nails at the front side of hat stand all as shown in drg complete all as specified and directed.

BIN SOILED LINEN (FD-70 M, FD-244, FD-212) Material and labour in replacement for new top of bin soiled made out of 18/19 mm thick wooden plank of seasoned first class hard wood to the the existing seasoned 1st class hard wood frame all as shown in drg complete all as specified and directed.

Material and labour in replacement for new sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19 mm thick wooden plank all of seasoned 1st class hard wood all as shown in drg complete all as specified and directed.

Material and labour in replacement for new legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden pank of seasoned 1st class hard wood all as shown in drg complete all as specified and directed.

Material and labour in replacement for Back of bin soiled made out of 18/19mm thick wooden plank of seasoned 1st class hard wood all as shown in drg complete all as specified and directed.

Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as shown in drg complete all as specified and directed.

Material and labour for recanning of bin soled with plastic cane half round 2 mm wide 0.4 mm thick best quality as per Godrej pattern including removing of old cane complete, all as specified and shown in drawing and as directed .

SIDE BOARD (FD-26 M) Material and labour in replacement for top of side board with 18/19mm thick pre laminated particle board one side hard wood including 6mm thick teak wood edging all-round, all as shown in drg complete all as specified and directed.

Material and labour in replacement for bottom of side board with 18/19mm thick particle board commercial type including 6mm thick teak wood edging all-round all as shown in drg complete all as specified and directed.

Material and labour in replacement for door shutter of side board with 18/19 mm thick one side hard wood pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around all as shown in drg complete all as specified and directed.

Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .

Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for shelf of side board with 18/19 mm thick particle board, all as shown in drg complete all as specified and directed.

Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class hard wood all as shown in drg complete all as specified and directed.

TABLE BED SIDE (FD-248) Material and labour in replacement for back side of table bed side with 6 mm thick plywood top , commercial type, BWR grade, ISI marked of required size complete all as specified and shown in drawing and as directed. .

Material and labour in replacement for shelf of table bed side with18/19mm thick one side teak faced pre laminated particle board, ISI Marked complete all as specified and shown in drawing and as directed.

Material and labour in replacement for top of of table bed side with18/19mm thick of prelaminated particle board including hard wood beeding complete all as specified and shown in drawing and as directed.

Material and labour in replacement for side of of table bed side with18/19mm thick one side teak faced pre laminated particle board, ISI Marked complete all as specified and shown in drawing and as directed.

CHAIR DINING WITH CUSHION (FD-375 &FD/E6/MAP-II/10) Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged front leg of chair dining with cushion with new leg of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged rear leg of chair dining with cushion with new leg of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged back rest of chair dining with cushion with new back rest of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged front rail of chair dining with cushion with new front rail of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged back rail of chair dining with cushion with new back rail of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

Material and labour in replacement for damaged stiffener of chair dining with cushion with new stiffener of required size and shape, made out of well seasoned first class hard wood, complete all as specified and shown in drawing and as directed.

CHAIR WOODEN BOTTOM WITHOUT ARMS (FD-225 & 285) Taking out unserviceable ply wood seat from chair wooden bottom w/o arms and supply and fixing new ply wood seat 6mm thick plywood commercial exterior grade BWR complete all as specified and shown in drawing and as directed.

Taking out unserviceable rear leg from chair wooden bottom w/o arms and supply and fixing new rear leg made of seasoned first class hard wood matching with the existing shape & size complete all as specified and shown in drawing and as directed.

Taking out unserviceable front leg from chair wooden bottom w/o arms and supply and fixing new front leg made of seasoned first class hard wood matching with the existing shape & size complete all as specified and shown in drawing and as directed.

STOOL DRESSING CB(FD-252) Taking out unserviceable leg from stool dressing CB and supply and fixing new leg made of seasoned first class hard wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as specified and shown in drawing and as directed.

Taking out unserviceable front/back rail from stool dressing CB and supply and fixing new front /back rail made of sseasoned first class hard wood matching with existing shape & size complete all as specified and shown in drawing and as directed.

Taking out unserviceable side rail from stool dressing CB and supply and fixing new side rail made of seasoned first class hard wood matching with the existing shape & size complete all as specified and shown in drawing and as directed.

COUCH EXAMINATION (FD-122) Material and labour in replacement for seat/top of couch examination, seat / top shall be 11 rows of 100mm dia copper coated springes of 100mm containing six springs in each row, fixed on 12mm thick teak wood plank at equal distance complete with hessian cloths and 40mm thick 32 desity foam shall be provided over cotton layer and upholstered with leatherite to give uniform smooth surface as approved by GE complete all as specified and shown in drawing and as directed.

Material and labour in replacement for drawer of couch examination made of 1mm thick MS black sheet including making shaple, welded with gas welding etc complete all as specified and shown in drawing and as directed.

Material and labour in replacement for leg of couch examination with 25 mm square tube of wall thickness of 1.6mm including necessary cutting, welding etc. complete all as specified and shown in drawing and as directed.

Material and labour in replacement for centre stiffener and long rail with 25mm square couch examination of wall thickness 1.60mm including necessary cutting, welding etc complete all as specified and shown in drawing and as directed.

Material and labour in replacement for short stiffener and short rail of couch examination with 25mm square table of wall thickness 1.60mm including necessary cutting, weding etc complete all as specified and directed.

Material and labour in replacement for hard rubber shoe of couch examination of black colour as per existing as approved complete all as specified and shown in drawing and as directed.

TABLE OFFICE CLERK WOODEN (FD- ) Material and labour in replacement for top of table office clerk wooden with 18/19 mm thick Particle board (exterior grade), ISI marked , commercial type including 1.0mm thick laminated sheet ( Shade and texture natural teak) pasted over the particle board on one face with synthetic rubber adhessive conforming to IS-4835 and 4 mm thick half round seasoned first class hard wood edging all round the table top, all as shown in drg complete all as specified and directed.

Material and labour in replacement for leg of table of required size made of well sseasoned first class hard wood all as shown in drg complete all as specified and directed.

Material and labour in replacement for front rail of required size made of well seasoned first class hard wood all as shown in drg complete all as specified and directed.

Material and labour in replacement for side rail of required size made of well seasoned first class hard wood, all as shown in drg complete all as specified and directed.

Material and labour in replacement for drawer with knob of required size made of well seasoned first class hard wood, all as shown in drg complete all as specified and directed.

Material and labour in replacement for stiffener of required size made of well seasoned first class hard wood, all as shown in drg complete all as specified and directed.

TABLE 3’ X 2’ FOR HAV's/OR's (FD-223) Material and labour in replacement for top of table 3’ X 2’ for Hav/ OR's with 18/19 mm thick particle board (exterior grade), ISI marked, commercial type including 1.0mm thick laminated sheet (Shade and texture natural teak) pasted over the particle board on one face with synthetic rubber adhessive conforming to IS-4835 and 4 mm thick half round first class teak wood edging all around the table top size all as shown in drg complete all as specified and directed.

Material and labour in replacement for leg of table of required size made of well seasoned first class hard wood, size all as shown in drg complete all as specified and directed.

Material and labour in replacement for front rail of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned first class hard wood, size all as shown in drg complete all as specified and directed.

Material and labour in replacement for side rail of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned first class hard wood, size all as shown in drg complete all as specified and directed.

Material and labour in replacement for stiffener of table 3’ X 2’ for Hav/ OR's of required size made of well seasoned first class hard wood, size all as shown in drg complete all as specified and directed.

CHAIR EASY STEEL CUSHIONED (FD-121) Material and labour in replacement for seat of chair easy steel of size 560mm x 635mm of 50mm thickness, 32 density foam cushion duly up holstered with leather based rexene fixed over and including 12mm thick commercial type, BWR grade, ISI marked ply wood size all as shown in drg complete all as specified and directed.

Material and labour in replacement for teak wood arm rest of size 65mm x 19mm of required size made of well seasoned 1st class hard wood complete all size as shown in drg complete all as specified and directed.

Material and labour in replacement for MS bars / MS flat of required size duly welded & smoothed, size all as shown in drg complete all as specified and directed.

Material and labour in replacement for back of chair easy steel of size 560mm x 355mm of 25mm thickness, 32 density foam cushion duly up holstered with leather based rexene fixed over and including 12mm thick commercial type, BWR grade, ISI marked ply wood size all as shown in drg complete all as specified and directed.

Material and labour for welding to broken places and smoothing it properly complete, size all as shown in drg complete all as specified and directed.

Material and labour for spray painting to all exposed steel & iron surfaces of chair easy cushioned with two coats of OG paint including preparation of old steel surfaces size all as shown in drg complete all as specified and directed.

CHAIR EASY CUSHIONED (FD-358) Taking out unserviceable seat frame from chair easy cushioned and supply and fixing new seat frame made out of 3mm thick plywood commercial exterior grade BWR ISI Marked as per IS code No 303. over which to be fixed 75mm thick foam cushion 32 density alongwith upholster leatherised of approved shade and texture by GE. Matching with the existing shape & size all as shown in drg complete all as specified and directed.

Material and labour in replacement for back rest of chair easy of required size made of well seasoned 1st class hard wood shape and size all as shown in drg complete all as specified and directed.

Material and labour in replacement for rear leg of chair easy of required size made of well seasoned 1st class hard wood shape and size all as shown in drg complete all as specified and directed.

Material and labour in replacement for front leg of chair easy of required size made of well seasoned 1st class hard wood shape and size all as shown in drg complete all as specified and directed.

Material and labour in replacement for front/back rail of chair easy of required size made of well seasoned 1st class hard wood shape and size all as shown in drg complete all as specified and directed.

Material and labour in replacement for side rail of chair easy of required size made of well seasoned 1st class hard wood shape and size all as shown in drg complete all as specified and directed.

Material and labour in replacement for arm rest of chair easy of required size made of well seasoned 1st class hard wood shape and size as per drg complete all as specified and directed.

Material and labour for preparation of old/new wooden/steel surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish/painting of approved quality with high gloss finish complete all as specified and as directed for the following wooden furnitures :- Locker bed side wooden (FD-54 (M) & 222)

Desk with dias (FD-107/1021)

Table dressing gents with mirror (FD-230,379 & 31)

Table dressing ladies with mirror (FD-251, 378 & 32)

Hat stand with mirror (FD-23 & 261)

Bin soiled linen (FD-70 M, FD-244, FD-212)

Side board (FD-26M)

Table Bed Side (FD-248)

Chair dining with cushion (FD/E6/MAP-II/10)

Chair wooden bottom with out arms (FD-225 & 285)

Stool dressing CB(FD-252)

Couch examination (FD-122)

Table office clerk wooden (FD- )

Table 3’ X 2’ for HAV's/OR's

Chair easy steel cushioned (FD-121 )

Chair Easy cushioned ( FD-358)

NOTE: - Amount of credit of Rs. 46,987.00 for retrieved materials is mentioned in Schedule of Credit Page No 18 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Mahal Enterprises

J.D.Builders

ASHOKA FURNITURES

M/s Rajesh Kumar Jain

Anil jindal and sons

RG Builders