Construction Of Anganwadi Center At Various Village Under TASP/ Border Village/2025-26/B.K/PKG No. 32 in Ta. Danta Dist. Banaskantha. (1) Ranpur-1

Charges for cleaning road site by removing of Gandabavals. Akadas,Bordies,etc. upto 4 mt.On either

side from edge of B.T. surface including de-rooting by JCB machine & throwing away all stuff,

1 branches etc. with all lead & leaft with all materials,labour etc.complete as directed (B 1.00 Job 2525.00

ScatteredBushes

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

2 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 76.00 Cmt 122.94

Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone

3 aggregate 40mm nominal size) and curing complete.(a) Foundation plinth. 19.00 Cmt 2692.00

Brick work using common burnt clay building bricks having crushing strength not less than

Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. Cmt

Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not

5 exceeding 20cm. In depth consolidation each deposited layer by ramming and watering. 17.40 Cmt 136.92

Filling in plinth with sand under floors including watering, ramming and consolidating dressing etc,

6 complete. 11.00 Cmt 444.75

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

cm2. Curing super structure above plinth level in cement mortar 1:6 ( 1 cement : 6 Fine sand ) for

G.F Conventional

Half brick masonary work using common burnt clay building bricks having crushing strength not less

8 than 35kg./sq.cm. in cement mortar 1:4(1 cement : 4 coarse sand ) in superstructure Above Plinth 12.00 Smt 684.27

Level (B) Conventional

Providing and fixing mild steel door and widows of frame of 40x40x6 mm and shutter frame for

doors 30x30x & for windows 35x35x5 mmsize angle &for shutter 25x25x3 and 18 gauge sheet for

9 panels & 10 mm dia barsat 10 cm c/c for grill,including 20x6 mm flat for binding patti & one coat of 460.00 Kg 63.63

primer and two coats of oil painting etc. complete.

Providing and fixing partly glazed and partly weld mesh jali ventilators made from 35x35x5 mm size

angle & 10 mm dia bar sat 10 cm c/c for grill, 20x6 mm flat fixing weld mesh jali, 3 mm glass, & one

coat of primer and two coats of oil painting etc. complete.

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

11 cost of form work but excluding the cost of reinforcement for reinforced concrete work in Footing 2.93 Cu.m 5188.37

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

cost of form work but excluding the cost of reinforcement for reinforced concrete work in Column

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

cost of form work but excluding the cost of reinforcement for reinforced concrete work in Plinth

Beam/Seal Band

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

cost of form work but excluding the cost of reinforcement for reinforced concrete work in

14 CHHAJJAS 0.40 Cu.m 6897.30

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

cost of form work but excluding the cost of reinforcement for reinforced concrete work in BEAM

Providing and laying ordinary cement concrete 1:1.5:3 (M200) and curing complete including the

cost of form work but excluding the cost of reinforcement for reinforced concrete work in SLAB

Providing T.M.T. bar FE500D reinforcement for R.C.C. work including bending, binding, and

17 placing. In position comp. Up to floor two level. 1514.80 Kg 77.29

Providing and laying Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

18 grey cement slurry including rubbing and polishing etc. complete. (A) 25mm thick 47.80 Sqm 1018.88

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and laying kota stone slab 25mm thick in risers of steps Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury including

rubbing and polishing etc. complete

Providing and laying White glazed tiles 6mm thick in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in Smt

white cement

Providing and laying White glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

21 cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 7.90 Cmt 1030.57

Providing 15mm thick cement plaster in single coat on fair side of bricks/ concrete wall for interior

22 plastering upto floor two level finished even and smooth in cement mortar 1:3 ( 1 cement :3 sand ) 140.00 Sqm 287.80

etc. complete.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

23 1:1 (1-cement : 1-sand) etc. complete. Including Finishing wall with Weather proof emulsion paint. 260.00 Sqm 394.53

Providing 10mm thick cement plaster in single coat on fair side brick/concrete walls for interior

24 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 38.00 Sqm 268.77

sand) Distemper Three coats Ground Floor.

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm

C.C. 1:2:4 ( 1 Cement, 2 sand, 4 Kapchi / grit 6mm to 12mm ) bedding for maintaining slope for plain

and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one or more color as

directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand ) containg one Kg. of

25 water profing materials per bag of O P C at plain or / and slops and to be tempered to bring mortar 45.00 Sqm 1078.69

ceramic up to surface with using white cement and colour pigment including rounding of junctions

and extending them up to 15 cm along the wall and curing with bends any pattens or design as per

drawing and cleaning by using oxalic acid etc complete.

Providing and fixing to wall ceiling and floor 6 Kg. F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with special flange compression type fittings, wall

26 clipsetc. including making good the wall ceiling and floor.(A) 75mm dia. 10 Kg. F/Cm2 20.00 Rmt 280.23

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) line

including fittings make or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the

27 wall with the help of clamp at every two metre C/C or shall be concelled as directed including 10.00 Rmt 72.65

necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. [A] 15mm dia.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) line

including fittings make or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the

28 wall with the help of clamp at every two metre C/C or shall be concelled as directed including 20.00 Rmt 91.84

necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. [B] 25mm dia.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with C.I scread down or hinged grating including Nos

the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

30 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 1.00 No 1292.19

100mm x 100mm x 100 mm size P type

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

31 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 1.00 No 2932.93

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Provision and fixing water closet squatting (orissa type W.C. pan) Beby Tube size including

Providing and Fixing 100 mm P or S trap for water closet squatting pan including jointing the trap

32 with the pan and soil pipe in cement mortar 1:1 (1-cement : 1- fine sand) (A) Vitreous china (b) long 1.00 Nos 1334.56

pattern white or color

Providing and fixing wash basin with single hole for pillar tap with C.I or M.S brackets painted white

including cutting holes and making good the same including fitting 32 mm dia C.P. brass waste and

33 M.I fisher union (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 400mm size.(iii) in white 1.00 Nos 1673.31

Providing and fixing stainless steel kitchen sink glossy ASIS 304 grade and 1 mm thick with overall

size 510mm x 432mm bowl size 445 x368 x190 mm including cutting holes and making good the

34 same with necessary waste pipe etc Complete 1.00 Nos 2419.96

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing chromium plated brass half turn flush cock of approved quality including fixing

35 in pipe line etc. complete 25mm dia 1.00 Nos 263.77

Providing and fixing gun metal check or nonreturn full way wheel valve 25 mm dia.

Providing and fixing screw down bib taps of following size :Brass chromium plated screw down bib

37 tap 15mm dia. 2.00 Nos 214.81

Providing and fixing Pillar Tap,capstan head,screw down high pressure with screws, shanks and back

38 nuts 15 mm dia. 2.00 Nos 308.73

Providing and fixing brass screw down stop tap15 mm dia. Nos

Providing erecting and fixing double coated PVC ISI water tank of required capacity each with all

40 necessary fittings and connection etc. complete on terrace. 500.00 Litre 3.95

Providing and fixing M.S. Fan clamps of shave and size as specified in existing R.C.C. slab including

41 cutting,chase and making good. 2.00 Nos 178.73

Providing and laying of 30 mm thick mirror polished Kota stone slab for selves of cup boards

42 including fixing with necessary grooves with all labour material etc. complete 7.30 Smt 582.77

Providing and laying of sandwich type kota stone plat form and supports using 25 mm thick mirror

43 polished Kota stone slab using c.m 1:3 for sand wich portion and front patti with round molding etc 3.80 Smt 890.82

Providing and constucting soak pit of 2 mt. dia out side and 4.00 mt. depth with honey combed

masonary 3.50 mt.from bottom and 0.50 mt. brick masonary in C.M. 1:6 top with covered with RCC

44 slab M200 PVC man hole cover,vent PVC pipe 180 mt long 50 mm dia & cowl vent etc comp. 1.00 Nos 22490.68

Providing and fixing PVC man hole cover 60x45 cm size with frame including fixing in slab etc.

45 complete. 1.00 Nos 732.25

Providing and fixing M.S. grills / Gates of required pattern to brick walls / Columns prepared with

M.S. flats, angles, Square / round bars, square pipes, at required spacings with necessary hold fasts as

46 per detailed drawing and fixing brick walls / coping / columns etc. complete including painting two 216.00 Kg 124.23

coat & applying primer coat. (A) Ornamental Grill

Demolition of Masonary, AC or GI Roofing, RCC / PCC, sanitary lines etc complete including

stacking of useful materials and disposal of un serviceable materials with all required lead and

47 making ground by fiiling trenches and made leveled and clear ground as directed by engineer in 1.00 Kg 7575.00

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

48 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 12.00 Pt. 449.45

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

49 box, single mounting base frame covered with textured/metallic/white front plate modules erected on 2.00 Pt. 629.23

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling completeCat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)both are of ISI marked

KV grade FRLSPVC insulated multi strand copper wires up to10 mtr length,in below type of pipe

erected complete with Modular type switch &5 pin Plug erected on PVC/Metallic/Wooden box

covered with appropriate front plate modules erected on/ inwall/ ceiling as per pipe erected with

50 following type of accessories. [I]For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.Wire from near by 1.00 Pt. 473.69

switch board /mcb db board (f)with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

51 modules erected on / in wall / ceiling with following type accessories Cat.III 4.00 Pt. 241.39

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

52 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 42.00 Mtr. 78.78

following size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

53 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size 6.00 Mtr. 107.06

(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 120V to 300V, Power Factor more than 0.9, THD < 10%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED 110 lumeans LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

ranges shown.)

(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feetCat-lll

(B) LED Lamps integral type, with PC diffuser suitable LAMP holder (b) 5 to 8 watts cat-III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

56 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 6 to 1.00 Ea. 299.97

32 Amp. Cat.III

57 Sheets steel powder coated enclosure suitable for in corporating One/Two nos. MCB. 1.00 Ea. 190.00

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (A) single phase in coming and horizontal single phase out going (a)

single door (IP-30) (iii)8 way

providing and erecting Approved make ELCBs/RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature &

59 do not incorporate any electronic component. for following Max. rating erected as directed (ii) 25 1.00 Ea. 1969.50

Amps. DP Cat.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

60 back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter 1.00 Ea. 4591.46

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted. (a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by

Engineer in charge)

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected

62 concealed in Ceiling with necessary finishing. 2.00 Ea. 108.07

Total Tender amount

Rupees Ten Lakh Forty Two Thousand Four Hundred Thirty Four And Paise Fifty Four Only

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of

my/our tender works out as under.

* Estimated amount put to tender

Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Notes 2 - Rates quoted include clearance of site (prior commencement of work and at its close ) in all respects and hold good for work under all conditions, site, moisture, weather

Deputy Executive Engineer Executive Engineer

R & B (Pan) Sub Division R & B (Pan) Division

Danta Palanpur