Augmentation of Receiving Station in Ganderbal District _Augmentation of Receiving Station Tulbagh from 2x6.3 MVA To 3x6.3 MVA_ PDDSS2526100166

Amount

Civil works

Earthwork in excavation over areas (exceeding 30 cms in depth, 1.5m in width as well as 10 Sqm on plan) incld. disposal of excavated earth, and lift upto 1.5m, (All kinds of soil). By mechanical means

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying of stone soling in level.

Providing and fixing of 4-5.mm thick GI 150 mm dia pipe to be fixed in foudation bolts after necessary fabrication and fixing of top and bottom plate of checquered plates including leveling, alligning etc complete job as directions by site incharge.

Providing and laying in position specified grade of reinforced cement conc. excluding the cost of centering, shuttering, finishing -and reinforcement All work upto plinth level, M20 grade concrete

Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete (T.M.T).

Centring & Shuttering upto plinths and footings

12 mm thick cement on the rough side of Transformer bed ,Equipmen founations Cable trench etc mix:1:6 (1: cement :6 fine sand)

Providing and laying of Earth mat of required size as per design within the excavated quantity of yard of 50x8 mm Gl Strip including cutting, bending, drilling, welding etc as per termination requirement with Torsion solid rods of 3meters long, 32mm dia with pointed tip for Ground insertion with the excavated cavity and improvement if required to get desired earthing resistivity values for 33kV and 11kV yards. The mesh should be inter- connected to each and every point for redundency and a anti-corrosive powdered paint coat to be applied at welded joints

Supply and fixing Structural steel work In single section fixed with connecting plate for chequered plates including cutting, hoisting, fixing in position and applying a priming coat of red oxide steel primer including carriage.

Providing and applying of Paint/redoxide coats on all angle and channel irons used in foundations, chain link fencing etc including scrubbing, removing of dirt, rust etc complete job a) Red oxide 2-coats .b)silver iodide

Supply and Laying of already existing crushed aggregate in the yard area.

Supply and Laying including levelling of crushed stone aggregate as metal in the yard

Providing and laying of 3“ PVC pipe 2mm 20 feet long in underground for disposing of wasted water and for yard earth watering and for retaining wall complete.

Providing & fixing of GI.foundation bolts and nuts

Carriage of all materials required for construction from source upto site of work by mechanical transport

Electrical Works

Installation, testing & commisioning of 33/11kV, 6.3 MVA ONAN, Copper wound, Out-door Type, conventional Power Transformer, Oil Filled with OLTC , LV Box and all accessories including HT and LT Terminal connections.

Supply, Installation, testing & commisioning of 33 kV Vacuum Circuit Breaker (36 kV, 1250A, 26.2 kA, Outdoor Type) with allied accessories and heavy duty pad clamps. (GTP to be approved)

Supply, Installation, testing & commisioning of 33 kV C&R Panel along with 3-O/C, 1-E/F , 2-3 element based Digital programeable based SCADA compatible relays and differential relay and REF protection (IEC61850) with digital programeable SCADA compatible, mimic diagram, Digital Programeable Voltmeter, Ammeter, LED Annunciation Windows with annunciation relays, Semaphors, Auxilliary relays of 4 sets having alarm and tripping relays. Hooter/Buzzer inbuilt 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port and extra terminals for remote switching of switchgear.(GTP to be approved)

Supply, Installation, testing & commisioning of 33 kV Isolator without Earthing Blade with allied accessories and pad clamps (36kV,800A, Outdoor, 3 poles, 25 kA) with multi fingered female contacts with tin coated contacts and Blate tips (Set of 03 Nos).

Supply, installation, Testing & Commisioning of Dead tank type 33 kV Current Transformer ratio 400-200-100/5-5-5 Amp (33 kV, 1Φ, Multi Ratio Multi Core, Outdoor) (1 No. per Φ) along with providing of allied accessories if required (3 Core CT with 0.5, 5P10, PS Class). (GTP to be approved)

Supply, Installation, testing & commisioning of 30 kV Lightening Arrestors (30 kV, 10kA, Station class, ZnO, Porclean type) gap less including its clamps and base insulators complete.

Supply & laying of multi core 12-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations.

Supply & laying of multi core 6-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations

Supply & laying of multi core 2-core 2.5 sq.mm Copper Armoured control cables with suitable brass/PVC glands for each cable including codding, thimbling and labelling of each cable interconnection and terminations

Providing and fixing of Lugs and Ferrules

Providing and laying of 200mm² ACSR aluminium conductor at 33kv yard for connecting of 33kv gantry and equipment including cutting, connecting of jumpers, tighting, stringing etc complete job.

Providing & fixing of GI Channel Iron./ iron Angles/ flat iron of sorts for equipment structure and Gantry structures including cutting, bending, drilling, welding etc complete modification as per site requirement.

Providing & fixing of GI Nuts and bolts with washers of sorts

Providing and fixing of Earth wire 7/4.00 mm sq.

Providing and fixing of GI flat for earthing 50x6 mm

Providing & fixing of heavy duty Pressure di-cast aluminium 630A T-clamps suitable for 200 mmsq ACSR Conductor having 8 no,'s GI bolts of 19mm thick.

33 kV Single Tension Fittings (6 bolt)

Supply & Installation of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with fitting suitable for 0.2 ACSR 70KN

Supply & Installation of 33 kV 10kN Polymer Post Insulator 36kV,170kV Impulse, creepage distance 1224m.

Providing and fixing of Aluminium Bus Bars for Transformer terminals of suitable size with color codding Heat shrink sleeves covered including drilling, welding, etc complete modification as per requirement to be fixed on LV side of Power Transformer and Neutral Ct.

Supply, installation, Testing & Commisioning of 11 kV VCB Panel Board (1+3) (12 kV, 1250A, 25 kA, indoor) with O/C, E/F relays (IEC61850), 3 element based, Mimic Diagram, Digital Voltmeter, Digital Ammeter, Digital Annunciation Windows with annunciation relays, 3-phase Tri-vector meter -5 Amps, DLMS Compliant with RS-485 port, the panel CT's should be 3 Core based and 3 ratio specifications (with 0.5-5P10,PS Class) 01 No. suitable for incomer feeder (CTR 800-400-200/5-5-5 Amp) & 03 No. suitable for outgoing feeders (CTR 400-200/5-5 Amp). (GTP to be approved)

Providing and laying of 11 kV 3- Core XLPE 400 mm² armoured, FRLS

Providing & Fixing of 11 kV Indoor Heat Shrinkable Cable Termination Kits suitable for above mentioned cable.

Providing & Fixing of 11 kV Outdoor Heat Shrinkable Cable Termination Kits suitable for above mentioned cable.

Dismanteling of Old 11kV VCB Panels 03 Nos. & 01 No. 33KV C&R Panel including transportation to Divisional Store at Safapora

Providing of Tool Kit ( Stanley / Taparia Make) comprising of :- Double end Spanners 14 Piece set ( 6 x7, 8x9,10x11,12x13,14x15,16x17,18x19,20x22 ,21x23,24x27,25x28,30x32 mm), Ring Spanner set 12 Piece set ( 6 x7, 8x9,10x11,12x13,14x15,16x17,18x19,20x22 ,21x23,24x27,25x28,30x32 mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), Combination Spanner 23 Piece Set ( 6 to 25 , 30& 32mm), combination Screw Driver set Cushion Grip, Pipe Wrench 12 Inch 1 No. 24 Inch 1 No., 12" Adjustable Chrome plated Wrench, 8" COMBINATION PLIER Line man plier, 8" LONG NOSE PLIER LENGTH NOSE PLIER, 9" CRIMPING PLIER SET, 230MM-, 7" LENGTH CUTTING PLIER, HEX KEY(LN Key) SET 11PC METRIC (1.5, 2, 2.5, 3, 4, 5,5.5, 6, 8, 10mm 12mm), 27PC-1/2 SQ. DR 12PT SOCKET SET ( comprising of ) 20 PC :- 1/2 Drive 12 Point Sockets: 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,30,32mm 6 PC :- 1/2 Drive Accessories : 2 PC Extension Bar: 5 and 10(125 and 250mm) Universal Joint, 1 PC :- Spark Plug Socket 6 Point 13/16, 1 PC Sliding T-bar 10(254mm); 1 PC Flip-Drive Rachet., 1/4" Torque Rench, 914mm , 36 Inch Bolt Cutter, 12" Hecsaw Frame with 12 No. spare Blades, Steel body Retactable Utility Knife with 12 No. spare Knives, 12"h 340gms Ball Pien Hammer wooden Handle, 16" 900gms Ball Pien Hammer wooden Handle, 5 Mtr Measuring Tape, Cold Chesel 7/8" (22mm), Centre Punch 8mm (15/16" )x 115mm(4 1/2 "), Good Quality Multi Meter ( Fluke Make 303/ equivalent), 24" Magnetic Torpedo/ beam Level (3Vails) 300mm -1 No. & 600mm -1No.

Providing of Aluminium Ladder 2x20 ft , 3mm Thick (double ladder)

Providing of FOS Army Search Light 55w Halogen (warm White) 2700K) Heavy Duty Rechargable hand Held Torch, ABS , 1600 Lumens.

SITC of Yard Lighting by 150 W LED flood lights including all allied accessories

Providing of Rubber Gloves for 33 kV level

Providing and fixing of fire extinguishers CO₂/ABC type 4.5 Kg capacity for control room

Providing of Safety Shoes of standard quality

Providing of Rubber Mat 1mx2m 19mm thick

M/S KALHANA ASSOCIATES (BID ID -2661961)

SSF Construction And Supply Enterprises (BID ID -2658908)