Construction of Various Non Plan Road Under MMGSY/SCSP/2026-27/ In Ta:Kalol Dist:Gandhinagar. (1) Constg Nandoli Gram Panchayat to Kalahar Gate to Hayat Joining Road Km 0/000 to 0/700.

Name of work :- Construction of Various Non Plan Road Under MMGSY/SCSP/2026-27/ In Ta:Kalol

Dist:Gandhinagar. (1) Constg Nandoli Gram Panchayat to Kalahar Gate to Hayat Joining Road Km

Bill Of Quantities

Memorandum showing items works to be carried out :

No Description of Item (with brief specification and reference to book of

Quantity Unit Rate In figures Amount

specifications)

Clearing and grubbing road land including uprooting trunk, vegetation, grass bushes,

shrubs, sapling and trees girth upto 300 mm removal of stumps of trees cut earlier and

disposal of unservicable materials [C] By Mechanical means in area of light jungle

Earth work for embankment with selected soil including breaking clods, dressing,

2 with all, lead and lift (excluding watering and consolidation) (A) From borrow area 1111.00 Cmt 154.88

with all lead and lift & CBR not less than

Rolling of earthwork in layers with vibratory roller 80 Kn to 100 Kn static weight

3 including filling in depressions which occurs during the process. 2247.00 Cmt 23.12

Providing hard side shoulder of 100 mm thick for embankment using quarry spall

with all lead and lift and including watering and rolling and consolidation of sub

grade in layers at OMC to required dry density including filling depression which

occur during the process using vibratory roller of 80 KN to 100 KN (selected quarry

spall having CBR value not less than

Box cutting the road surface to properslopeand camber for making a base forroad

5 work including removing theexcavated stuff and depositing on theroad side slope as 1136.00 Cmt 109.25

directed upto50Mt.lead.

Construction of granular sub-base by providing well graded material, (MC Metal

26.50 mm to 53 mm 35%, B.T. Kapachi 25.60 mm to 4.75 mm 45% & Coarse sand

below 2.38 mm 20% }spreading in uniform layers with motor grader on prepared

6 surface, mixing by mix in place method with rotavator at OMC, and compacting with 487.00 Cmt 1537.22

smooth wheel roller to achieve the desired density, complete as per Technical

Specification Clause 401. Grading I

Provdining and laying W.B.M of B.T.M.C metal of size 45 mm to 63 mm size

including 0.12 Cu.M. Stone Screeing & 0.08 Cu.M. stone dust as filler including

7 spreading, watering & consolidation by vibratory roller 80KN to 100KN static 228.00 Cmt 1979.60

weight. 75 mm thick compected.

Providing and laying cement concrete 1:3:6 (1-Cement : 3 coarse sand : 6- hand

8 broken stone aggregates 40 mmnominal size) and curing complete excluding cost of 377.00 Cmt 3084.90

formwork in (A) Foundation and Plinth

Providing & Laying cement concrete 1:1:5:3 (1 cement : 1:5 course sand : 3 graded

stone aggregate 20 mm nominal size) for C.C. road and curing cost of form work.

Finishing the cement concrete road by trimix process inclusive of labour charges for

trimix vacuum dewatering process on cement concrete road by using vacuum

dewatering pump, surface floater, surface vibrator including channeling & making

grooves & rough finish to surface by providing expansion joints, contraction joint &

construction joints with fillings of joints with asphalt filler as per direction by

engineer incharge & as per specsificaiton.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Providing and fixing hectometer as per I.R.C. type design including painting, lettering

etc. com plate.

No Description of Item (with brief specification and reference to book of

Quantity Unit Rate In figures Amount

specifications)

Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-

1977. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro

refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand postand

12 frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as 6.00 No 3906.19

required; painted with bestquality epoxy coatings in black andwhite bends. The

details of symbol foreach board shall be as per theinstruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in

charge.(B) High Intensity Grade..................

Village name/ Bump Ahed sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 60cms. rectangle as as per the design of IRC-67-1977 pre

treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per

13 IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size 4.00 No 6397.44

iron angle of 50 x 50 x 5mm painted with best quality epoxy coatings in black and

white bends. the details of symbol or inscription / numerals for each board shall be as

per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block

of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under

the supervision of engineer in charge.(B)High Intensity Grade .....................

Place ideatification sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 150 x 90cms. rectangle as as per the design of IRC-67-1977

pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size

iron angle of 50x50x5mm 75x75x6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals for

each board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation

curing etc. complete under the supervision of engineer in charge.(B)High Intensity

Providing and fixing logo board of MMGSY as per National Rural Road

Development Agency diamond size, 600 x 600 mm, 1.50 mm thick Plate & board

15 plate size, 900 x 250 mm, 1.5 mm thick M.S. plate and 2.40 meter deep length single 1.00 No 4250.08

angle 75 x 75 x 6 mm size including fitting and painting , lettering with luminous

colour as per drawing including fixing in CC 1:3:6 etc compete.

STOP Sign :-Providing and fixing sign boards made out of 4mm ACP (Aluminum

composite Panel); size 90 cms. Octagonal as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro reflective sheeting of Type-4 as per ASTM D-4956 and latest MORD

Specifications; 3.1mtr long stand post of Iron Angle 75 x 75 x 6mm and frame

16 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality 2.00 No 6704.36

epoxy coatings in black and white bends. The details of symbol for each board shall

be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer shall be submitted by contractor.

(A) Class-B High intensity Grade Retro Reflective sheeting.

No Description of Item (with brief specification and reference to book of

Quantity Unit Rate In figures Amount

specifications)

Hazard Marker Sign :-Providing and fixing sign boards made out of 3mm ACP

(Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest MORD Specifications; 1.8mtr long stand post of Iron Angle 75 x 75 x 6mm

as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original manufacturer shall

be submitted by contractor. (A) Class-B High Intensity Grade Retro Reflective

Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet

/ 3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size

18 iron angle of35x35x3mm; painted with bestquality epoxy coatings in black and white 4.00 No 3711.75

bends. the details of symbol or inscription / numerals for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60Cms. for each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective sheeting

Project Information Board: Providing and fixing of typical Project informatory sign

boardwith Logo as per 1700 of MORD specifications and drawing. The board will be

a composite unit consisting ofThree Plates ACM (Aluminum Composite Material),

material specificaitons as per clause 17001.3. The topmost plate will be of 3mm ACM

in diamond shape of 600x600mm size, riveted with MS angle iron frame

of25mmx25mmx5mm size on back on edges. The middle 4mm ACM plate of will be

1200x150mm size rivetedwith MS angle iron frame of 25mmx25mmx5mm size on

back on edges. The main 4mm ACM lower mostplate will be 1500mmx600mm size,

riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting ofall the

sheets over angle and flat iron frame will be done neatly to have plain surface on one

side. The angleiron frame of lower most plate and flat iron frame of the middle plate

will be welded to two nos 75mmx75mm (12 SWG) sheet tubes posts placed at

1125mm apart centre to centre. the top of the middle platewill be flushed with the top

of 75mm dia medium steel tube posts and these posts will be embeded in

cementconcrete M15 grade block of 450x450x600mm below ground level. The

height of the bottom of the lowerplate will be 1200mm from normal ground level and

the bottom of the middle plate will be 100mm above thetop level of the lower most

plate. the diamond shaped plate mounted over flat angle iron frame will beconnected

to middle plate by square steel section of 47mmx47mm, thickness 12SWG having a

spacing of100mm between the diamond shaped plate and middle plate and this square

section will be riveted to thebottom point of the diamond shaped plate. logo, letters

and numerals on the ACM should be madeup of Retro Reflective sheeting of Type-1

AEGP Class-A grade as per the latest MORD section 1700 andIRC 67-2012

specifications. Al the section of the frame and posts shall be painted with primer and

two coatsof epoxy paint. The design, painting and lettering shall be done as per the

Signage Guide and asdirected by Engineer-In-charge. . A warranty for 5 years for the

Retro reflective sheeting for Class-A

Road Marking With Hot Applied Thermoplastic Paints with Reflectorising Glass

Beads On Bitumen Surface.Providingcand laying a hot applied thermoplastic

compound 2.5 mm. thick including reflectorising glass beads @250 gms per sqm.

Area,Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-

2015.The finished surface to be level uniform and free from streaks and holes. Zebra

20 patta/bump patta lane /center line /edge line/cut patta, The white color marking 168.00 Smt 367.73

should provide Iiminanance coefficient on cement road shall be min. 130 mcd/m2/lux

and asphalt road shall be min. 100 mcd/m2/lux during the service life during the day

time. The marking should meet the performance criteria for night time reflectivity,

wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015.

Warranty of Reflectorising for Two Years.

No Description of Item (with brief specification and reference to book of

Quantity Unit Rate In figures Amount

specifications)

Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised Pavement

Markers made of polycarbonate and ABS moulded body and reflective panels with

micro prismatic lens capable of providing total internal reflection of the light entering

the lens face and shall support a load of 13635 kgs. tested in accordance to ASTM D

4280 Type H and complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not

exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm

on each side and the slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/-

mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of

500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as per manufacturers

recommendation and The color of the marker should be as per the IRC 35-2015 and

as directed by Engineer-in-charge..

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars

for culverts carrying heavy traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of

following internal daimeters.(v) 300 mm dia.

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of

23 useful materials and disposing of excavated stuff up to 50M. lead. (a) Loose or soft 336.00 Cum 123.13

24 Providing, Laying, Supplying and fixing Pre Cast PU Shape Drain 450 x 450 700.00 Rmt 4597.02

Providing and Constructing Kundi (Inspection Chamber) Size 0.60Mt X 0.60Mt

Inside Measurement

Total Tender amount

Rupees Ninty Eight Lakh(s) Twenty Seven Thousand Eight Hundred Ninty Five And Paise Fifty Two Only

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates

mentioned above. Amount of my/our tender works out as under.

* Estimated amount put to tender

1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be

2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.

3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.

4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017 as

stated i. S.O.R therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted from

the rate of orignal item at the rate of input rate mentioned in all the tender.

Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.

Deputy Executive Engineer Executive Engineer

R P Sub Division Panchayat R & B Division

Gandhinagar Gandhinagar