Providing and fixing of S.S. railing in the entrance ramp, covering of drain with MS grating in front of C-30 building and repair of stair steps in between Oak mess and B-17 hostel at North Campus of IIT Mandi

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a) For thickness of tiles above 25 mm and up to 40 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Centering and shuttering including strutting, propping etc. and removal of form work for : a) Foundations, footings, bases for columns as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Ravinder Kumar

Mahender Kumar Contractor

Murari Lal