Construction of (G plus 2 Ground Floor Plan) for new (i) Science Laboratory Building,

Amount

1. New Science Laboratory: Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soi

Excavating, supplying and filling of local earth (including royalty) bymechanical transport upto a lead of 5km also including ramming andwatering ofthe earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level 6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of spec gradeexcluding the cost of centering and shuttering - All work up to plinth level l:3:6 (l Cement : 3 coarse sand (zone-lll) derived fiom naturalsources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources)

hoviding and laying in position specified grade of cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level 1:1.5:3 (l cement: 1.5 coarse sand (zoneJll) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in walls (any including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, hnishing and reinforcement. 1:1.5:3 (l cement : 1.5 coarse sand(zone-lll) natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and rtinforcement with 1:1.5:3 (1 cement: 1.5 coarsesand(zone-Ill) derived fiom natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources).

Providing and laying damp-proof course 40mm thick with cement concrele l:2:4 (l cemenl :2 coarse sand (zoneJII) derived from natural sources : 4 graded stone aggregate l2.5mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removalof form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.7 Stairs, (excluding landings) except spriral-staircases

Treatrnent ofsoil under existing floors using chemical em @ one litre per hole, 300 mm apart including drillingl2 mm diameter holes and plugging with cement mortar I :2(l cement : 2 Coarse sand) to match the existing floor: hos/Lindane E.C. 20% with 1oloconcentration ulsion With Chlorpyip

Brick work with common bumt clay modular designation 7.5 in foundation and plinth in 6.2.1 Cement Mortar I :6 I cement : 6 coarse sand

Half brick masonry with common burnt clay F.P.S. (non modular) bricks ofclass desigation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar l:4 I cemenl :4 coane sand)

Providing wood work in frames ofdoors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners ofrequired dia & length (hold fast lugs or dash fastener shall be paid for windows, clerestory separately) 9.1.1 Second class teak wood

Providing and fixing panelled or pane for doors, windows and clerestory windows, fxing with butt hinges ofrequired size with necessary screws, excluding panelling which will be paid for separately, all complete 8s per direction of Engineer-in-charge. (I'lote:- Butt hinges and lled and glazed shutters necessary screws shall be Paid separately) 9.5.1.1 Second class teak wood 35 mm thick shutters

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete l:2:4 (l cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer l2mm thick cement hardener consisting of mix l:2 (l cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost ofcement slurry, butt excluding the cost of nosing steps etc. complete.

l2 mm cement laster of mix 13.1.1 1:4 I cement: 4 ltne sand)

l5 mm cement plaster on the rough side of single or half brick wall ofrnix : 13.2.1 l:4 1 cement: 4 fine sand)

20 mm cement plaster of mix 13.3.1 l:4 I cement: 4 fme sand)

Applying prime coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing with Deluxe Multi surface paint system for and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/l0sqm over an under coat ofprirner applied @0.75 ltri losqm of approved brand and manufacture.

Providing and fixing aluminium sliding door bolts, tSl anodised (anodic coating not less than grade AC l0 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 9.96.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI anodised (anodic coating not less than gade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. 9.97.1 300x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary andles, ISI marked, anodised screws etc. complete. 125mm

Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. 13.41. 1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint ofrequired shade 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.2 10 sqm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-cha:ge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than l0kg/sqm)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar I :4 ( Icement:4 coarse sand) jointing with grey cement slurry @3 3 kgisqm including grouting thejoints with white cement and matching pignents etc. The tiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily. Double vitrified tile lished lurish ofsize I l.4lA.l.l Size of Tile 600 x 600 mm

Electrical works : Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. Length.

2.1.2 Medium point up to 6.00 metre. Length.

2.1.3 Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.3.3 Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 Schneider neo break, C&S, Havells, Standard, or equivalent as approved by the Deptt.)make) 15.4.1.1 4 way SPN double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.1.1. B Series (Schneider MG, Legrand, Hager, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. B. Series (ABB Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.3.1.2 40A

Supply installation & testing of G.I earth station with perforated 40 mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket for tee, elbow, nipple, and 50mm x 40mm G.I reducing socket for funnel including locking arramgement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 Kg and Charcoal (64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the as required complete and as directed by the Department ( Without requlator). 27.1.3 Premium model 1400 mm Sweep. (ORIENT PSPO make)/ Premium model 1400mm Sweep ss390 Deco. Havells make).

Supplying fitting and fixing of ceilling fan regulator including connections etc. complete as required. 27.6.2 Electronic Type

Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt. 39.3.4 2 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying installation testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. directly on wall/celling including connection with 1.5 sq.mm PVC insulated S.C. Copper conductor as required and as directed by the department. 3.28.1 LED Lamp indoor application operating voltage 90V-250V, 12V DCI Model GN111-3 LED Lamp with backup Mails input with 12V, 5Ah sealed maintanence free battery (make Phillips, Bajaj, Scheider, Havells)

2. Library Building: Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soi

Excavating, supplying and filling of local earth (including royalty) bymechanical transport upto a lead of 5km also including ramming andwatering ofthe earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level 6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of spec gradeexcluding the cost of centering and shuttering - All work up to plinth level l:3:6 (l Cement : 3 coarse sand (zone-lll) derived fiom naturalsources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources)

hoviding and laying in position specified grade of cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level 1:1.5:3 (l cement: 1.5 coarse sand (zoneJll) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in walls (any including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, hnishing and reinforcement. 1:1.5:3 (l cement : 1.5 coarse sand(zone-lll) natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and rtinforcement with 1:1.5:3 (1 cement: 1.5 coarsesand(zone-Ill) derived fiom natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources).

Providing and laying damp-proof course 40mm thick with cement concrele l:2:4 (l cemenl :2 coarse sand (zoneJII) derived from natural sources : 4 graded stone aggregate l2.5mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removalof form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.7 Stairs, (excluding landings) except spriral-staircases

Treatrnent ofsoil under existing floors using chemical em @ one litre per hole, 300 mm apart including drillingl2 mm diameter holes and plugging with cement mortar I :2(l cement : 2 Coarse sand) to match the existing floor: hos/Lindane E.C. 20% with 1oloconcentration ulsion With Chlorpyip

Brick work with common bumt clay modular designation 7.5 in foundation and plinth in 6.2.1 Cement Mortar I :6 I cement : 6 coarse sand

Half brick masonry with common burnt clay F.P.S. (non modular) bricks ofclass desigation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar l:4 I cemenl :4 coane sand)

Providing wood work in frames ofdoors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners ofrequired dia & length (hold fast lugs or dash fastener shall be paid for windows, clerestory separately) 9.1.1 Second class teak wood

Providing and fixing panelled or pane for doors, windows and clerestory windows, fxing with butt hinges ofrequired size with necessary screws, excluding panelling which will be paid for separately, all complete 8s per direction of Engineer-in-charge. (I'lote:- Butt hinges and lled and glazed shutters necessary screws shall be Paid separately) 9.5.1.1 Second class teak wood 35 mm thick shutters

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete l:2:4 (l cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer l2mm thick cement hardener consisting of mix l:2 (l cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost ofcement slurry, butt excluding the cost of nosing steps etc. complete.

l2 mm cement laster of mix 13.1.1 1:4 I cement: 4 ltne sand)

l5 mm cement plaster on the rough side of single or half brick wall ofrnix : 13.2.1 l:4 1 cement: 4 fine sand)

20 mm cement plaster of mix 13.3.1 l:4 I cement: 4 fme sand)

Applying prime coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing with Deluxe Multi surface paint system for and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/l0sqm over an under coat ofprirner applied @0.75 ltri losqm of approved brand and manufacture.

Providing and fixing aluminium sliding door bolts, tSl anodised (anodic coating not less than grade AC l0 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 9.96.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI anodised (anodic coating not less than gade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. 9.97.1 300x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary andles, ISI marked, anodised screws etc. complete. 125mm

Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. 13.41. 1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint ofrequired shade 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.2 10 sqm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-cha:ge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than l0kg/sqm)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar I :4 ( Icement:4 coarse sand) jointing with grey cement slurry @3 3 kgisqm including grouting thejoints with white cement and matching pignents etc. The tiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily. Double vitrified tile lished lurish ofsize I l.4lA.l.l Size of Tile 600 x 600 mm

Electrical works : Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. Length.

2.1.2 Medium point up to 6.00 metre. Length.

2.1.3 Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.3.3 Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 Schneider neo break, C&S, Havells, Standard, or equivalent as approved by the Deptt.)make) 15.4.1.1 4 way SPN double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.1.1. B Series (Schneider MG, Legrand, Hager, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. B. Series (ABB Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.3.1.2 40A

Supply installation & testing of G.I earth station with perforated 40 mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket for tee, elbow, nipple, and 50mm x 40mm G.I reducing socket for funnel including locking arramgement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 Kg and Charcoal (64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the as required complete and as directed by the Department ( Without requlator). 27.1.3 Premium model 1400 mm Sweep. (ORIENT PSPO make)/ Premium model 1400mm Sweep ss390 Deco. Havells make).

Supplying fitting and fixing of ceilling fan regulator including connections etc. complete as required. 27.6.2 Electronic Type

Supplying installation testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. directly on wall/celling including connection with 1.5 sq.mm PVC insulated S.C. Copper conductor as required and as directed by the department. 3.28.1 LED Lamp indoor application operating voltage 90V-250V, 12V DCI Model GN111-3 LED Lamp with backup Mails input with 12V, 5Ah sealed maintanence free battery (make Phillips, Bajaj, Scheider, Havells)

3. GYM Room: Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soi

Excavating, supplying and filling of local earth (including royalty) bymechanical transport upto a lead of 5km also including ramming andwatering ofthe earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level 6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of spec gradeexcluding the cost of centering and shuttering - All work up to plinth level l:3:6 (l Cement : 3 coarse sand (zone-lll) derived fiom naturalsources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources)

hoviding and laying in position specified grade of cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level 1:1.5:3 (l cement: 1.5 coarse sand (zoneJll) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in walls (any including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, hnishing and reinforcement. 1:1.5:3 (l cement : 1.5 coarse sand(zone-lll) natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and rtinforcement with 1:1.5:3 (1 cement: 1.5 coarsesand(zone-Ill) derived fiom natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources).

Providing and laying damp-proof course 40mm thick with cement concrele l:2:4 (l cemenl :2 coarse sand (zoneJII) derived from natural sources : 4 graded stone aggregate l2.5mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removalof form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.7 Stairs, (excluding landings) except spriral-staircases

Treatrnent ofsoil under existing floors using chemical em @ one litre per hole, 300 mm apart including drillingl2 mm diameter holes and plugging with cement mortar I :2(l cement : 2 Coarse sand) to match the existing floor: hos/Lindane E.C. 20% with 1oloconcentration ulsion With Chlorpyip

Brick work with common bumt clay modular designation 7.5 in foundation and plinth in 6.2.1 Cement Mortar I :6 I cement : 6 coarse sand

Half brick masonry with common burnt clay F.P.S. (non modular) bricks ofclass desigation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar l:4 I cemenl :4 coane sand)

Providing wood work in frames ofdoors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners ofrequired dia & length (hold fast lugs or dash fastener shall be paid for windows, clerestory separately) 9.1.1 Second class teak wood

Providing and fixing panelled or pane for doors, windows and clerestory windows, fxing with butt hinges ofrequired size with necessary screws, excluding panelling which will be paid for separately, all complete 8s per direction of Engineer-in-charge. (I'lote:- Butt hinges and lled and glazed shutters necessary screws shall be Paid separately) 9.5.1.1 Second class teak wood 35 mm thick shutters

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete l:2:4 (l cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer l2mm thick cement hardener consisting of mix l:2 (l cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost ofcement slurry, butt excluding the cost of nosing steps etc. complete.

l2 mm cement laster of mix 13.1.1 1:4 I cement: 4 ltne sand)

l5 mm cement plaster on the rough side of single or half brick wall ofrnix : 13.2.1 l:4 1 cement: 4 fine sand)

20 mm cement plaster of mix 13.3.1 l:4 I cement: 4 fme sand)

Applying prime coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing with Deluxe Multi surface paint system for and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/l0sqm over an under coat ofprirner applied @0.75 ltri losqm of approved brand and manufacture.

Providing and fixing aluminium sliding door bolts, tSl anodised (anodic coating not less than grade AC l0 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 9.96.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI anodised (anodic coating not less than gade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. 9.97.1 300x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary andles, ISI marked, anodised screws etc. complete. 125mm

Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. 13.41. 1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint ofrequired shade 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.2 10 sqm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-cha:ge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than l0kg/sqm)

Electrical works : Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. Length.

2.1.2 Medium point up to 6.00 metre. Length.

2.1.3 Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.3.3 Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 Schneider neo break, C&S, Havells, Standard, or equivalent as approved by the Deptt.)make) 15.4.1.1 4 way SPN double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.1.1. B Series (Schneider MG, Legrand, Hager, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. B. Series (ABB Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.3.1.2 40A

Supply installation & testing of G.I earth station with perforated 40 mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket for tee, elbow, nipple, and 50mm x 40mm G.I reducing socket for funnel including locking arramgement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 Kg and Charcoal (64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the as required complete and as directed by the Department ( Without requlator). 27.1.3 Premium model 1400 mm Sweep. (ORIENT PSPO make)/ Premium model 1400mm Sweep ss390 Deco. Havells make).

Supplying fitting and fixing of ceilling fan regulator including connections etc. complete as required. 27.6.2 Electronic Type

Supplying installation testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. directly on wall/celling including connection with 1.5 sq.mm PVC insulated S.C. Copper conductor as required and as directed by the department. 3.28.1 LED Lamp indoor application operating voltage 90V-250V, 12V DCI Model GN111-3 LED Lamp with backup Mails input with 12V, 5Ah sealed maintanence free battery (make Phillips, Bajaj, Scheider, Havells)

4. New Science Laboratory: Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soi

Excavating, supplying and filling of local earth (including royalty) bymechanical transport upto a lead of 5km also including ramming andwatering ofthe earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level 6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of spec gradeexcluding the cost of centering and shuttering - All work up to plinth level l:3:6 (l Cement : 3 coarse sand (zone-lll) derived fiom naturalsources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources)

hoviding and laying in position specified grade of cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level 1:1.5:3 (l cement: 1.5 coarse sand (zoneJll) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in walls (any including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, hnishing and reinforcement. 1:1.5:3 (l cement : 1.5 coarse sand(zone-lll) natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and rtinforcement with 1:1.5:3 (1 cement: 1.5 coarsesand(zone-Ill) derived fiom natural sources : 3 graded stone aggregate 20 mm nominal size derived fiom natural sources).

Providing and laying damp-proof course 40mm thick with cement concrele l:2:4 (l cemenl :2 coarse sand (zoneJII) derived from natural sources : 4 graded stone aggregate l2.5mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removalof form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.7 Stairs, (excluding landings) except spriral-staircases

Treatrnent ofsoil under existing floors using chemical em @ one litre per hole, 300 mm apart including drillingl2 mm diameter holes and plugging with cement mortar I :2(l cement : 2 Coarse sand) to match the existing floor: hos/Lindane E.C. 20% with 1oloconcentration ulsion With Chlorpyip

Brick work with common bumt clay modular designation 7.5 in foundation and plinth in 6.2.1 Cement Mortar I :6 I cement : 6 coarse sand

Half brick masonry with common burnt clay F.P.S. (non modular) bricks ofclass desigation 7.5 in superstructure above plinth level up to floor V level 6.13.2 Cement mortar l:4 I cemenl :4 coane sand)

Providing wood work in frames ofdoors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners ofrequired dia & length (hold fast lugs or dash fastener shall be paid for windows, clerestory separately) 9.1.1 Second class teak wood

Providing and fixing panelled or pane for doors, windows and clerestory windows, fxing with butt hinges ofrequired size with necessary screws, excluding panelling which will be paid for separately, all complete 8s per direction of Engineer-in-charge. (I'lote:- Butt hinges and lled and glazed shutters necessary screws shall be Paid separately) 9.5.1.1 Second class teak wood 35 mm thick shutters

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete l:2:4 (l cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer l2mm thick cement hardener consisting of mix l:2 (l cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost ofcement slurry, butt excluding the cost of nosing steps etc. complete.

l2 mm cement laster of mix 13.1.1 1:4 I cement: 4 ltne sand)

l5 mm cement plaster on the rough side of single or half brick wall ofrnix : 13.2.1 l:4 1 cement: 4 fine sand)

20 mm cement plaster of mix 13.3.1 l:4 I cement: 4 fme sand)

Applying prime coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing with Deluxe Multi surface paint system for and exteriors using Primer as per manufacturers specifications. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/l0sqm over an under coat ofprirner applied @0.75 ltri losqm of approved brand and manufacture.

Providing and fixing aluminium sliding door bolts, tSl anodised (anodic coating not less than grade AC l0 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 9.96.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI anodised (anodic coating not less than gade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. 9.97.1 300x10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary andles, ISI marked, anodised screws etc. complete. 125mm

Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. 13.41. 1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint ofrequired shade 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.2 10 sqm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-cha:ge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than l0kg/sqm)

Electrical works : Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. Length.

2.1.2 Medium point up to 6.00 metre. Length.

2.1.3 Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 Schneider neo break, C&S, Havells, Standard, or equivalent as approved by the Deptt.)make) 15.4.1.1 4 way SPN double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.1.1. B Series (Schneider MG, Legrand, Hager, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. B. Series (ABB Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.3.1.2 40A

Supply installation & testing of G.I earth station with perforated 40 mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket for tee, elbow, nipple, and 50mm x 40mm G.I reducing socket for funnel including locking arramgement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt (5 Kg and Charcoal (64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the as required complete and as directed by the Department ( Without requlator). 27.1.3 Premium model 1400 mm Sweep. (ORIENT PSPO make)/ Premium model 1400mm Sweep ss390 Deco. Havells make).

Supplying fitting and fixing of ceilling fan regulator including connections etc. complete as required. 27.6.2 Electronic Type

Supplying installation testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. directly on wall/celling including connection with 1.5 sq.mm PVC insulated S.C. Copper conductor as required and as directed by the department. 3.28.1 LED Lamp indoor application operating voltage 90V-250V, 12V DCI Model GN111-3 LED Lamp with backup Mails input with 12V, 5Ah sealed maintanence free battery (make Phillips, Bajaj, Scheider, Havells)

5. Common Toilet: Ground Floor Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing Ground Level (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (C) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing & laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (a) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab,retaining walls, walls of the septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser a) M15 grade concrete or prop.1:2:4

Providing & laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (b) In Super Structure from plinth level up to 1st floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing , shelf & support balcony, lintel,sill band,beam,girder,bressumer,cantilever, stair case (except spiral stair case and landing) including preparing the top surface & finishing of nosing. N) Without using admixture, plasticiser a) M15 grade concrete or prop.1:2:4

Providing and laying 25mm thick damp proof coarse with cement concrete in prop 1:1.5:3 with graded store agg. Stone of 10mm down nominal size including providing approved damp proof admixture in proparation of recommended by the manufacturer including curing etc.complete as directed.

TIMBER SHUTTERING (FORMWORK) Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering, strutting and propping etc hight of propping and centering below supporting floor to floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.1.1.1 Foundation,footings,bases of colums,pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut (a) Squre, Rectangular,ploygonal,in plan or any shape loke Tee/L etc. having plane vertical face. (ii) Using 25mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut 3.1.1.4 Sides and soffits of beams, beam haunchings, cantilever, girders, bressumers lintelsand horizontal ties. (a) For depth not eceeeding 1.0M. (ii) Using 25mm thick plank.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut 3.1.1.5 Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies, and the like. (a) Floor etc upto 200mm in thickness (ii) Using 25mm thick plank.

PRE CONSTRUCTION ANTI-TERMITE TREATMENT: Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) liters per square meter towards the concrete and masonary walls so as to ensure earth in contact with the structure well treated-with. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a). Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed . (I) In sub-structure up to plinth level including dewatering if necessary (b) In proportion 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112 mm thick brick wall (a) In cement mortar in proportion 1:4.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrough, framed and fixed in position in contact with C.C or brick masonary wall including supplying fitting and fixing with M.S hold fast (40mm x 3mm x 250mm) as per design embedded in cement concrete block in proporation 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonary as directed and specified. (b) With 1st class timber (Bonsum/Sundi)

Providing fitting and fixing full paneled doors/windows including oxidized M.S but hings (100mm x 75mm x 3.55mm) with necessary screws (other fittings to be and paid separately) (B) With 1st class local wood (ii) 35mm thick.

Providing, fitting and fixing PVC door frame of Duroplast make DPF-5060 make suitable for DPS-3720 made from extruded PVC multichamber hollow section having dimensions of 50mmx60mm (Toletance + 1mm). Horizontal and vertical sections shall be joined by steel screws after inserting M.S. tubular rectangular galvanised L-shaped brackets of size 100mmx100mm or plastic brackets of size 75mmx75mm with metred cut at the corners. Hinge side of the frame shall be reinforced with M.S.Tubular section of size 40mmx20mm. The frame will be fixed to the column/ stiffner/ wall with the help of 3 nos 75mm long and 4mm dia steel screws and expandable fastners on each side of the door frame complete in all respects as sepcified and directed at all levels.

Providing fitting and fixing PVC shutters of Duroplast DPS 3720 make made from extruded PVC stiles and rails made from rigid PVC multicavity chamber section of size 90mm x 37mm (Tolerance + 1mm). The conners of the stiles and rails shall be metred out and fixed ton each other with the help of solid plastic L- shaped brackets or M.S rectangular tubular galvanished two nos of size 200mmx100mm and 100mmx100mm at each coener by self tapping steel crews.PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filed with PVC panels of approved colour of size 100mmx20mm. The two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all omplete as specified and directed at all levels. (Door fixtures and fittings to be measured and paidv seperatly)

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (b)Fixed windows and ventilators (iv) 5 mm clear glass

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (b)Fixed windows and ventilators (iv) 5 mm clear glass

GRILL WORKS: Providing fitting and fixing M.S grill of required pattern for windows/ clerestory windows/openingwith M.S flats at required spacing in frame all ground, squre or round M.S bars with round headed bolts and nuts or screws. II. Omamental Grill (c) Fixed to Brickwork/P.C.C/R.C.C

FLOORING WORKS 65mm thick cement concrete floor consisting of 50mm under layer of cement concrete 1:3:6 of size (1 cement 3 coarse sand 6 coarse agg. Of size 25mm down) and 15mm thick wearing layer in cement concrete in prop 1:1:2 (1 cement : 1 coarse sand : 2 coarse agg of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for boad @ 2.75Kg per sqm of floor area) including curring etc.complete as directed.

PLASTERING WORKS: 10mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering upto 1st floor level including arrises or rounded angles not exceeding 80 mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick) b) In cement mortar 1:4

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop 1:2 with a floating coat of neat cement finish.

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning oil grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (white)

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surfaces over 100mm in width or girth. b) High gloss (Asian paint/Berger paint/ICI paint/ J & N paint/Nerolac).

Applying primary coat with ready mixed "red -lead /red-oxide" primer over new steel and other metal surface up to 100mm in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. (a) With ready mixed "red-lead/ red oxide" primer.

Painting two coats surfaces over 100mm in width or grith (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter sand papering and stopping. Surfaces over 100mm in width or girth. High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ICI paint/J & N paint/Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Supplying, fitting and fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.(anodised to bright nature matt & satin finished).

Internal Electrification: Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1.1 Short point up to 3.00 metre. Length.

2.1.2 Medium point up to 6.00 metre. Length.

1.1.3 Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing n capping (AKG/Precision/Presto plast/Polycab/MW or equivalent make as approved by the deptt.) system including earth continuity. (1.8.1) With 2x2.5 sq mm + earth continuity with 1x1.5 sq mm in flat 19mm ISI marked casing n capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing n capping (AKG/Precision/Presto plast/Polycab/MW or equivalent make as approved by the deptt.) system including earth continuity. (1.8.2) With 2x4 sq mm + earth continuity with 1x2.5 sq mm in flat 19mm ISI marked casing n capping system.

11.12. Supplying and fixing of polished brass bracket of 18 SWG 25 cm long cast back plate and brass.

Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including connection as approved by the deptt. as required (without lamp)

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.4.1 Schneider neo break, C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make) 15.4.1.1 4 way SPN double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.1.1 B. Series (Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. B. Series 16.3.1 (ABB Scheider MG, Legrand, Hanger, Crabtree Xpro make) 16.3.1.2 40A

Supply installation & testing of G.I earth station with perforated 40 mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket for tee, elbow, nipple, and 50mm x 40mm G.I reducing socket for funnel including locking arramgement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt 5 K and Charcoal 64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department. 27.2.1 omestic 27.2.1.2 Power Flux 225mm sweep (ORIENT make)

Supplying and drawing of weather proof aluminium conductor cable of the following size as directed and specified by the department. 5.17.4 10.00 Sq.mm twin core.

Sanitary Installation: Providing fitting and fixing starwhite vitreous water closet squatting pan (Indian type W.C. Orissa pattern) of size 58x44x25 with 100mm SCI 'P' or 'S' trap, 10 litre low level PVC flushing cistern with manualy controlled device (handle over/Sleek Plus SIngle Flush) of Hindware make with all fittings and fixtures complete including cutting and making good the walls and floors wherever required (Cat No.20076)

Providing, fitting and fixing starwhite vitreous china wall mounted type KYLIS water closet (European type W.C. Pan 380x370x550) of Hindware make with starwhite CONSTELLATION show falling PVC seat with cover of HINDWARE make including all accessories provided for by the manufacture including painting of fittings and brackets, cutting and making good the walls eherever required with P Trap (Cat No.92080)

Providing fitting and fixing victreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions etc complete including painting of fittings and brackets cutting and making good the walls & floors wherever required. (A) Parryware Make (a) White (i) New Magnum (Cat. No.C0575)

Providing vitreous china STUDION wash basin of size 570 x 480 of Hindware make with semi pedestal including CI/MS brackets, 32mm CP brass waste coupling of standard pattenr, CP stop cock, CP brass china with plug, PVC waste pipe with all accessories as provided for by the manufacture including painting of fittings and brackets and making good the damage of the floors and walls wherever required. (a) Starwhite vitreous china wash basin of size 570 x480 mm (Cat No.10096 & 11038)

Providing, fitting and fixing recessed soap tray/soap dish complete as directed and specified.

Supplying fitting and fixing chrome plated C.P. Towel rail of sona make complete as specified and directed.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend of Supreme/Prince make including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fitting and fixing 45 degree PVC bend of supreme/prince make including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed. (a) In exposed surfaces or in trenches. ii) 110mm dia.

Supplying fitting and fixing PVC plain single tee of (Supreme/prince) make including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed. (a) In exposed surfaces or in trenches. ii) 110mm dia.

Providing fitting and fixing 110 mm dia PVC cowel of ISI make complete as directed and specified.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Water Supply: Supplying fitting and fixing Ajoy Flowguard CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss tnreaded fitting including clamps at 1.00m spacing. this include joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (a) In exposed surfaces or in trenches. e) 40mm dia.

Concealed by chieselling bricking wall/C.C wall/R.C.C and making good to the damages. F) 15mm diameter

Concealed by chieselling bricking wall/C.C wall/R.C.C and making good to the damages. E) 25mm diameter

Supplying fitting and fixing C.P. Two way bib cock with flange as directed and specified.

Supplying fitting and fixing C.P. Long body bib cock with flange of Aqmeco make as directed and specified.

Supplying fitting and fixing C.P. Stop cock of as directed and specified. B(i) Angle cock (Cat No.F110004)

Concealed stop cock 15mm (Cat No.F110005)

Supplying fitting and fixing C.P. Central hole basin mixer as directed and specified.

Supplying and fitting fixing C.P. pillar cock Hindware (IMMACULA) make as directed and specified (Cat No.F110001)

Supplying and fitting fixing C.P. Sink cock Hindware (IMMACULA) make as directed and specified (Cat No.F110021)

Supplying and fitting gun metal country pit value (full way value) ISI Make as specified and directed. B) 40mm dia.

Supplying and fitting gun metal country pit value (full way value) ISI Make as specified and directed. C) 25mm dia.

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (A) 2000 Lt capacity (a) Sintex make

DHARAMSING NARZARY

Hiramba Narzary