Provision of Supply Installation Testing and Commissioning of Fire Fighting System Automatic Sprinkler Automatic Fire Detection and Alarm System Fire Extinguisher and Signage System of CHC Charichhaka Health Institution of Puri District

FIRE PUMP ROOM EQUIPMENT Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 MWC head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame , 2 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV as required WILO/KIRLOSKAR/KSB

b) 2 core x 1.5 sqmm

G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessory accessories as required. ( Earth pit shall be executed by other agencies).

Supply and Fixing of 1 Nos of 5000 ltr.doubble layer plastic water storage tank for fire fighting hydrant system to be placed at terace level.Make:- Sinttex/Plasto

Supplying, installing, testing and commissioning of GI Pipes, ERW confirming to IS 1239 Pt - I HEAVY grade up to 150mm dia and pipes 200mm dia and above shall be M.S as per IS: 3589 with painting, suitable type of supports, anchor fasteners, bolts nuts, clamps, U bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Make-TATA/SAIL/JINDAL 150mm nominal dia

100mm nominal dia

50mm nominal dia

Supplying, installing, testing and commissioning of C.I. waffer type Non-return valves ( PN 16 ) swing check type with required flanges, nuts, bolts and gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar 150 mm nominal dia

100 mm nominal dia

Supplying, installing testing and commissioning of Cast Iron Body flanged Y-type Strainer with SS screen complete with suitable flanges, nuts, bolts, gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar 150 mm dia

100mm dia.

Supplying, Installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar 150mm nominal dia

100mm nominal dia

50mm nominal dia

Supplying, Installing, testing and commissioning of CI Gate valves as per IS:14846(PN 1.0 Rating for suction side of the pumps) and rising sprindle type with flanges, bolts ,nuts, washers , gaskets etc. Make-Kartar/Zoloto/Leader/Kirloskar 200mm nominal dia

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 25 mm nominal dia

Supply and installation testing and commissioning of differential Pressure switches of suitable range (0 to 12 bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc.Make-Indfoss/Danfoss

Supply and installation testing and commissioning of Pressure gauges of suitable range (0-16 bar), 100 mm diameter dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / reducers etc.Make-H.Guru/G.Guru

Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 200 mm dia MS pipe to 1200 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc.

HYDRANT SYSTEM Supplying, installing, testing and commissioning of GI Pipes confirming to IS 1239 Heavy Grade Pt - I Heavy grade up to 150mm dia and pipes 200mm dia and above shall be M.S as per IS: 3589 with painting, suitable type of supports, anchor fasteners, bolts nuts, clamps, U bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete.Make-TATA/SAIL/JINDAL 150mm nominal dia

100mm nominal dia

80mm nominal dia

25mm nominal dia

If required , it will be paid as per actual measurement certified by clients Engg. Supplying and wrapping of anti corrosive bituminous tape on bituminous paint.

If required , it will be paid as per actual measurement certified by clients Engg. Supplying, installing, testing and commissioning of C.I. waffer type Non-return valves ( PN 16 ) swing check type with required flanges, nuts, bolts and gaskets etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar 100 mm nominal dia

Supplying, Installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make-Kartar/Zoloto/Leader/Kirloskar 100mm nominal dia

Supplying, Installing, testing and commissioning of CI Gate valves as per IS:14846(PN 1.0 Rating for suction side of the pumps) and rising sprindle type with flanges, bolts ,nuts, washers , gaskets etc. Make-Kartar/Zoloto/Leader/Kirloskar 150mm nominal dia

Supplying, erecting and commissioning of Hydrants Single headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc complete.Make-Newage/Minimax/Fireshield

GI short branch pipe with nozzle conforming to IS 903.Make-Newage/Minimax/Fireshield

15 M long, 63mm dia RRL hose conforming to IS 636 Type A with SS instantaneous couplings and Hoses shall be stored inside fire Hose Box.Make-Newage/Minimax/Fireshield

First aid Hose reel drum of 180° swinging type with 19mm dia Rubber braided hose of 30M. length with Ball Valve and 6mm diameter Shut off nozzle, complete. The hose reel shall conforming to IS 884.Make-Newage/Minimax/Fireshield

Supplying, installing and commissioning of fire brigade inlet connection of 4 way with each of 63 mm dia. built - in Gun metal instantaneous coupling type arranged on 150 mm dia. Make-Kartar/Kirloskar/Zoloto

Supplying and fixing approved make of 25mm dia automatic air release valve spring loaded type complete with unions etc. complete. KARTAR , FIRE SHIELD , EXFLAME

AUTOMATIC FIRE DETECTION AND ALARM SYSTEM Supply, Installation,Testing & Commisioning of Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward 4 Loop Panel

Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch/Edward

Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch/Edward

Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module,base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward

Supplying, installing, testing and commissioning of rate of rise heat detector with base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward

Supplying, installing, testing and commissioning of 2C x 1.5 mm², armoured, single stand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI

FIRE EXTINGUISHERS Providing and Fixing ISI marked ABC stored pressure type Fire extinguisher of 6 Kgs. Capacity confirming to IS: 15683 with discharge hose, nozzle, Mono Amonium Phosphate base & ABC powder pressurised with nitrogen gas carrying handle and wall mounting bracket etc as required.Make-Safex/Fireshield/Ceasefire

Providing and Fixing of 4.5 Kgs. Capacity CO2 gas type ISI marked fire extinguisher (IS: 15683) fitted with high pressure 1 mtr. Long discharge hose & horn complete with refill gas, carrying handle and wall mounting bracket etc as required.Make-Safex/Fireshield/Ceasefire

Providing and Fixing of of 2 kG capacity Eco Friendly, Stored pressure type filled with HFC 134 A ( clean agent fire extinguishant having Zero Ozone depletion potential ) Clean Agent Fire Extinguishers with safety seal, pressure guage, controllable discharge mechanism, helium leak detection tested and conforming to IS 15683 complete with initial charge as required.Make-Safex/Fireshield/Ceasefire

Providing and Fixing of Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. complete, confirming to IS: 15683.Make-Safex/Fireshield/Ceasefire

Fire buckets round bottom type enamel painted, white inside & Red out side and Letter FIRE in black out side and handle with mounting bracket.

Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.

SIGNAGES Providing and installing in position the following tupe of sign boards made out of 3mm thick Opaque PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Make-Bajaj/Prolite Floor identification signage (i.e, GROUND FLOOR ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm 60cm.

Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.

Providing and fixing in position the signage of Fire Extinguisher to be fixed above the every extinguisher. Size 6 x 8

Providing and fixing in position the signage of Fire Hydrant & Hose Reel to be fixed near the every fire shaft at all floors. . Size 6 x 8

Providing and fixing the signages Main fire alarm panel.& Fire Pump Room

Providing and fixing the signages Assembly point - with symbol ( A2 Size) - Size 17 x 22

Illumination Glow light for Exit Indication with Battery Back-up.

S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time greater than or equal to 3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A1) size on steel frame with cc work.

S/F of evacuation plan- outer cover 3 mm thick photolluminiscent plastic, paint highest quality UV resistant glass paint frame Aluminium made material non-radioactive, non phosphorous, non-toxic and laed free , glowing time greater than or equal to3000 mins luminance 215mcd/sqm warranty 5 years as the direction of Eng-in-charge(A3) size on steel frame with cc work.

Please Enable Macros to View BoQ information