Replacement of missing defective members and other allied works of 132 kV Transmission Lines falling under the jurisdiction of TLMD III Amargarh including fabrication galvanization cutting welding bending transportation fixing of missing member

Amount

I) MISSING MEMBERS

Supply, Fabrication, Galvanization, cutting, skew cutting, bending etc of tower material for missing members of various sizes as per site requirement of 132 KV Transmission lines including supply of requisite Hot dip Galvanised nuts and bolts and measurement of individual members at site ( Complete Job)

For 132 KV Zainkot-Pattan Transmission Line

For 132 KV Pattan-Amargarh Transmission Line

For 132 KV Delina-Sheeri Transmission Line.

Mechanical Carriage of tower members, nuts and bolts etc from dumping site to various tower locations including manual carriage of tower material, nuts and bolts to various tower locations (Complete Job)

For 132 KV Zainkot-Pattan Transmission Line

For 132 KV Pattan-Amargarh Transmission Line

For 132 KV Delina-Sheeri Transmission Line.

Fixing of tower members at the respective tower locations including tightening of these members (Complete Job)

For 132 KV Zainkot-Pattan Transmission Line

For 132 KV Pattan-Amargarh Transmission Line

For 132 KV Delina-Sheeri Transmission Line.

II) RECONDUCTORING OF DAMAGED CONDUCTOR ON 132 KV D/C AMARGARH-KUPWARA TRANSMISSION LINE.

A) SUPPLY:- Design, Manufacture, Supply, Packaging & Forwarding, Transportation, Delivery at site of and materials.

0.2 ACSR panther,(a) Alumunium=30/3 mm(b) Steel=7/3 mm Overall dia 21mm.Approximate Wt 976Kg/Km Ultimate breaking Load=89.67 KN;including 1.5%sag and jumpering

Disc Insulators 70 KN,Ball & Socket type, 145mm height and 255mm dia. Creepage total 430 mm and 260 mm protected.

Disc Insulators 120 KN/90 KN,Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Mid Span compression Joints for 0.2 ACSR Panther conductor.

Vibration Dampers for 0.2 ACSR panther Conductor.

Single Suspension Fittings for panther shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor.The ball and socket designation must be 16 mm.

Single Tension Fittings for panther shall have minimum failing load of 100% ultimate strength of Bundle cnductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm.

(B) LAYING AND STRINGING OF CIRCUIT KM CONDUCTOR OF 132 KV SINGLE CIRCUIT TRANSMISSION LINE WITH PANTHER CONDUCTOR.

Loading/unloading of Panther conductor.

Carriage of ropes ,pulleys derrickpoles etc through 1.0 km avg.lead.

Loading of insulators & other fittings.

No. Tension towers.

No. Suspension towers.

Unloading of insulators & other fitting from Mech. Transport and carriage upto 0.50 mtrs.

No. Tension towers.

No. Suspension towers.

Carriage of Insulators & other fittings beyond 50 mtrs. Upto 1.0 Km.

No. Tension towers.

No. Suspension towers.

Loading of stringing equipment like compressor, turn table ,four sheeve pulleys,rollers etc

Unloading and stacking of material as per item 35.

Carriage of material as per item 35.

Laying of conductor (old Conductor= 1 cktkm & new conductor =0.5cktkm)

Stringing of panther condcutor including errection of insulator strings/fittings

Making of compression joints

(C) DISMANTLING OF PANTHER CONDUCTOR ( COMPLETE JOB)

Dismantalling of PANTHER CONDUCTOR including insulators as well as hardware and other accessories on existing 132kV D/C Amargarh -Kupwara Transmission line (1.5Ckt Kms)

M/S MALIK ELECTRICALS

M/S Bhat Brothers Electrical And Electronics