Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
22 Jun 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
82
2 conditions
/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of t he R e v i s e d Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 10 of November 2017.
The supplier have to provide the material testing certificate from NABL approved lab. The Firm to supply certificate for material specification of liners from NABL approved lab, and at the time of delivery at consignee location, further Sample testing of material will be done at ACMT Parel depot by railways.
28 conditions
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.
MSE : a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Diretorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.
Risk purchase TIME LIMIT FOR MAKING RISK PURCHASE WILL BE 9 MONTHS INSTEAD OF 6 MONTHS.
Validity : Tenderers to quote minimum 90 days validity of offers.
Material specification should be as per drawing.
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
ADVANCE ACCEPTANCE/COUNTER OFFER AND DELIVERY PERIOD: The delivery period in Store Procurement cases shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance/Letter of Acceptance.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Gujarat · 23,000 Numbers total
LINER
82246916I~WR
82246916I
Open - Indigenous
Goods
Vadodara, Gujarat
₹0
Exempted
22 Jun 2026
9 Jun 2026
5 items · 23,000 Numbers total
Liner 240x10x3mm for Side frame Column side Fig-25,Para-5.3.3 of G-95(Rev-1) with Amend ment No-5.(1) WD-21-Casnub-22NLB-93 rev-2with Amendment No-4.(2) IS;3885 Pt-Gr-IV,BHN(380-420) [ W arranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) BAJWA, WR | Gujarat | 10000.00 Numbers |
| Total | 10,000 Numbers | |
Liner 160x125xx3 mm for pedestal crown roof Fig-27,Para-5.3.5 of G-95 (Rev-1) with Amend ment No-5(1) WD-21Casnub-22NLB-93,rev-2 July 02 with amendment no-4.(2) IS: 3885,Pt-I,Gr-IV,BHN(380- 420). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) BAJWA, WR | Gujarat | 1000.00 Numbers |
| Total | 1,000 Numbers | |
A set of Si-Mn liners conforming to material specification to IS:3885 Pt-1, Gr-IV with proper m arking on each liners One Set consists of: (a)Pedestal Jaw Liner 75x80x3 mm 1000 No. (b)Pedestal Jaw Liner 100x80x3 mm 1000 No. (c) Pedestal Jaw Liner 80x87x3 mm 1000 No. REF. G-95, Drawing No. Fig. 32 [ War ranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) BAJWA, WR | Gujarat | 1000.00 Numbers |
| Total | 1,000 Numbers | |
ANTI ROTATION LUG LINER SIZE 244X23X3 MM AS PER RDSO MANUAL G-95, Drawing No. Fig. 26 MAT.&SPEC. IS -3885 PT.-1 GR.IV [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) BAJWA, WR | Gujarat | 1000.00 Numbers |
| Total | 1,000 Numbers | |
LINNER SIZE:75X17X3MM FOR BOLSTER COLUMN OUTER GIB DRG.NO:G-95, FIG-41, PARA-5. 4.3 SPEC. NO:[1]IS:3885 PT-1,Gr.-IV BHN [380-420] [2]WD-21-CASNUB-22NLB-93 REV-2, AMENDMENT NO-4 OR LATEST. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) BAJWA, WR | Gujarat | 10000.00 Numbers |
| Total | 10,000 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
G-95-27.pdf
ATTACHMENT
G-95-25.pdf
ATTACHMENT
G-95-41.pdf
ATTACHMENT
G-95-28.pdf
ATTACHMENT
G-95-32.pdf
ATTACHMENT
G-95-26.pdf
ATTACHMENT
G-95-40.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .