Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-Finance KALIJHORA KALIJHORA BAZAR KALIJHORA BAZAR KALIJHORA BAZAR DARJEELING WEST BENGAL 734008 | DARJEELING | WEST BENGAL | 734008 | L1 | Accepted-Finance Accepted | |
| 2 | L2₹6.2 L+₹48,040 (8.33%)Rejected-Finance SHYAM COTTAGE RAM NAGAR SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹8.3 L+₹2.5 L (43.6%)Rejected-Finance | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | Royal Construction Company L1 | HEM RAJ L2 | BAL CHAND WALIA L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting, timbering where ever required as per direction & entire satisfaction of the Engineer-in-Charge. | 20.25 | Cum | 110 ₹2,227.5 Lowest | 349 ₹7,067.25 | 350 ₹7,087.5 |
| 2.00 | Extract of existing damaged or rusted MSERW Pipe, bolts and nuts with fitting arrangement by Hydra crane and laying, jointing, testing, carriage and lowering of new MSERW pipe and providing priming system to new syphons as per direction of Engineer-in-Charge with crane complete process in all respects and to the entire satisfaction of the Engineer-in-Charge. | 12 | Hours | 1,900 ₹22,800 | 1,800 ₹21,600 | 1,000 ₹12,000 Lowest |
| 3.00Providing, laying, jointing & testing of MSERW pipe bevelled edged conforming to ISO:3183-2007 of following mentioned grade, diameter and wall thickness in trenches having random length of 5.7 mtrs the pipe shall have in side & out side manufacturers work conforming to IS:4736 (with upto date ammendments). The pipe shall be jointed with Flange Table-17 of BIS 6392-1971 (latest with upto date ammendments) welded at both ends of pipes according as per IS 816-1965 by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-Citojet / Esab make conforming to IS: 814-1991 at site of work complete in all respects. Each butt welded joints shall be tested with dye penetration test (with the kit) consisting of 33 sprays of 250 ML, each include (a) cleaner CL-96 (b) Penetrant PT-97 (C) Developer Div-98 of checkmate make, including mannual/ mechanical handeling of pipes complete in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge. | ||||||
| 3.01 | 200 mm dia MSERW pipe wall thickness 4.80mm Table-17 | 84 | Cum | 4,250 ₹3,57,000 Lowest | 4,500 ₹3,78,000 | 5,001 ₹4,20,084 |
| 4.00 | Providing and fixing of Cast Iron Non Rising Sluice Valve Flanged end as per IS:14846, Body, Dome, Wedge-CI IS:210, Gr. FG260 Body & Wedge Rings-Bronze IS:318 of 200 mm dia (H/W) of Kartar/ Pelican/ BIR make PN-1.6 with flange table-17 with nuts & bolts and gasket including complete process of fixing new valve by all means complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge. | 2 | Nos. | 55,000 ₹1,10,000 | 45,000 ₹90,000 Lowest | 1,13,500 ₹2,27,000 |
| 5.00 | Providing and fixing of Cast Iron Foot Valve Flanged end as per IS:4038, PN-0.2 Housing, CI IS:210, Gr. FG200, Strainer-Cast Iron IS 210 Gr FG 200 of 200 mm dia (H/W) of Kartar/ Pelican/ BIR make with flange table-17 with nuts & bolts and gasket including complete process of fixing new valve by all means complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge. | 2 | Nos. | 35,000 ₹70,000 Lowest | 40,000 ₹80,000 | 57,000 ₹1,14,000 |
| 6.00Providing and welding of MS flanges conforming to IS :6392-71 of table and diameter mentioned below. The welding of flanges with pipe conform to IS:816-1969 with welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-Citojet / Esab make conforming to IS: 816-1995 with electrodes as per IS:814-1991 i/c required nos. of bolt & nuts as per IS:1369-1967, 3mm thick asbestos fiber jointing gasket conforming ti IS: 2712-1965. The welding of flange should be done in two layer on both faces to make the joints air & water tight complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge. | ||||||
| 6.01 | 200 mm dia Table-17 | 8 | Nos. | 1,200 ₹9,600 Lowest | 5,000 ₹40,000 | 5,100 ₹40,800 |
| 7.00 | Provision for priming to syphons of 125 mm dia (for filling of water in pipe line) complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge. | 1 | Job | 5,000 ₹5,000 Lowest | 8,000 ₹8,000 | 7,000 ₹7,000 |
| 8.00Rebate of 3.50 % i.e Rs. 31966/- only on existing dismentalled pipe, sluice valve and foot valve etc:- | ||||||
Tender Value
₹8.8 L
EMD Value
₹17,600
Closing Date
30 Jun 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
JSD Baggi
Replacement of MSERW pipe 200 mm dia for Syphon of Zone No. 2 and 3
2025_HPIPH_108141_1
5821-5871 dated 19-06-2025
Open Tender
Civil Works
Item Rate
90 days
Baggi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹17,600
9 Dec 2025
20 Jun 2025
1 Jul 2025
21 Jun 2025
30 Jun 2025
21 Jun 2025
21 Jun 2025 - 30 Jun 2025
Amount
Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting, timbering where ever required as per direction & entire satisfaction of the Engineer-in-Charge.
Extract of existing damaged or rusted MSERW Pipe, bolts and nuts with fitting arrangement by Hydra crane and laying, jointing, testing, carriage and lowering of new MSERW pipe and providing priming system to new syphons as per direction of Engineer-in-Charge with crane complete process in all respects and to the entire satisfaction of the Engineer-in-Charge.
Providing, laying, jointing & testing of MSERW pipe bevelled edged conforming to ISO:3183-2007 of following mentioned grade, diameter and wall thickness in trenches having random length of 5.7 mtrs the pipe shall have in side & out side manufacturers work conforming to IS:4736 (with upto date ammendments). The pipe shall be jointed with Flange Table-17 of BIS 6392-1971 (latest with upto date ammendments) welded at both ends of pipes according as per IS 816-1965 by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-Citojet / Esab make conforming to IS: 814-1991 at site of work complete in all respects. Each butt welded joints shall be tested with dye penetration test (with the kit) consisting of 33 sprays of 250 ML, each include (a) cleaner CL-96 (b) Penetrant PT-97 (C) Developer Div-98 of checkmate make, including mannual/ mechanical handeling of pipes complete in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge.
200 mm dia MSERW pipe wall thickness 4.80mm Table-17
Providing and fixing of Cast Iron Non Rising Sluice Valve Flanged end as per IS:14846, Body, Dome, Wedge-CI IS:210, Gr. FG260 Body & Wedge Rings-Bronze IS:318 of 200 mm dia (H/W) of Kartar/ Pelican/ BIR make PN-1.6 with flange table-17 with nuts & bolts and gasket including complete process of fixing new valve by all means complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge.
Providing and fixing of Cast Iron Foot Valve Flanged end as per IS:4038, PN-0.2 Housing, CI IS:210, Gr. FG200, Strainer-Cast Iron IS 210 Gr FG 200 of 200 mm dia (H/W) of Kartar/ Pelican/ BIR make with flange table-17 with nuts & bolts and gasket including complete process of fixing new valve by all means complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge.
Providing and welding of MS flanges conforming to IS :6392-71 of table and diameter mentioned below. The welding of flanges with pipe conform to IS:816-1969 with welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-Citojet / Esab make conforming to IS: 816-1995 with electrodes as per IS:814-1991 i/c required nos. of bolt & nuts as per IS:1369-1967, 3mm thick asbestos fiber jointing gasket conforming ti IS: 2712-1965. The welding of flange should be done in two layer on both faces to make the joints air & water tight complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge.
200 mm dia Table-17
Provision for priming to syphons of 125 mm dia (for filling of water in pipe line) complete job in all respect with in all leads & lifts to the entire satisfaction & directions of Engineer-in-Charge.
Rebate of 3.50 % i.e Rs. 31966/- only on existing dismentalled pipe, sluice valve and foot valve etc:-
HEM RAJ (BID ID -527766)
BAL CHAND WALIA (BID ID -529491)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .