Development Work to Childrens Play Park, Gardens Recreation Area and Surrounding Area at Eco Planet Pazhassi Padiyoor- Phase II

Civil works

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.33.1 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

2.1.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and rerolling the sub grade and disposal of surplus earth with lead upto 50 metres.

16.78.2 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

OD307179/2025-2026 Providing and laying rough finish Laterate stone flooring in required design and pattern (40 x 20 cm or nearest) in linear as well as curvilinear all complete as per the architectural drawing with 150mm thick stone over 50mm thick base of stone aggregates of size 6mm etc. complete as specified and as directed by the engineer in charge

50.6.7.1 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

11.33.1 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class teak wood

13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.4.1 Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

30.2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

30.2.28 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge

30.2.14.1 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 1.2 m dia and 1.2 m deep

OD307182/2025-2026 Grassing with Bufflow grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good arth, if needed (the good earth shall be paid for separately)

16.91.2 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

51.2.4 Filling with Sand <br> Supplying and filling sand in foundation trenches of culvert for stabilizing the top clay layer including watering, ramming, consolidating and dressing, etc complete for improving bearing capacity of soil

4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).

22.24 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab,sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducingpermeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry shake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage

50.6.7.2 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

8.2.3.2 Granite stone slab of all colour and texture except black, Cherry / Ruby redArea of slab over 0.50 sqm

16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

13.48A.1 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm

OD307183/2025-2026 Supplyand installation of water booster pressure system including pump, starter and all other necessary items including all labour and incidental charges.

Supplying and Planting suitable Plants and Trees

30.2.57.2 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Shrubs plants (for 200 nos.=427.45/200)

30.2.57.1 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

OD316977/2025-2026 Supply of Gulmohar tree (Royal poincaina red colour) of 3 feet height and a cover size of 12*13 including Transportation and fertilizer.

OD317099/2025-2026 Supply of Rain tree (Samanea saman) of 4 feet height and a cover size of 15*15 including Transportation and fertilizer

OD317098/2025-2026 Supply of Budha bamboo (Bambusa ventricosa) of 4 feet height and a cover size of 12*13 including Transportation and fertilizer

OD317097/2025-2026 Supply of Indian Almond of 4 feet height and a cover size of 8*10 including Transportation and fertilizer

OD317252/2025-2026 Supply of Ficus Benghalensis of 4 feet height and a cover size of 18*18 including Transportation and fertilizer

OD317259/2025-2026 Supply of Indian Laburnum of 2 feet height and a cover size of 8*10 including Transportation and fertilizer

OD317363/2025-2026 Supply of Mangifera Indica of 2 feet height and a cover size of 8*10 including Transportation and fertilizer

OD317364/2025-2026 Supply of Teak of 1 feet height and a cover size of 5*8 including Transportation and fertilizer

OD317365/2025-2026 Supply of Elanji of 3 feet height and a cover size of 9*10 including Transportation and fertilizer.

Water supply, Landscape Irrigation process

50.18.9.4.2 Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2

50.18.9.7.1 Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

50.18.9.8.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

OD307260/2025-2026 Supply and Installation of Pop UP sprinkler having wet area of 6 meter and 360 degree with locking pattern including raiser, tee joints and all other necessary fittings and labour charges

OD307261/2025-2026 Supply and installation of Head unit, Automation Unit, solinoid Valves, Irrigation Pump, PRV Valve and all the fittings including labour charges

Supplying and fixing Childrens Play Equipments

OD313223/2025-2026 Supplying and fixing of Snail Multi Play Station with Net Climber (Rope) is constructed using a 114 mm GI "B" "B" Class pipe as the main post and 32 mm GI "B"Class GI pipes for handrails. The unit includes one spiral slide junior LLDPE and one tube slide LLDPE, along with LLDPE of one snail and two flower panels, A rope-based net climber and heavy-duty metal steps and platforms. Powder coating with latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. All main pipes are fitted with foundation grip tubes for Erection . The equipment is observed to be compliant with ISO and CE certification requirements. cost of all material and labour complete

OD313122/2025-2026 Supplying and fixing of Bike Spring Rider made up of high Quality 3 layer 300 GSM FRP materials and supported by heavy duty high Density 20mm spring coil with a pedestal iron plate for concrete with help of 1/" bed bolds and nuts. The rider is painted naturally and no sharp edges. cost of all materials, labour etc complete

OD313121/2025-2026 Supplying and fixing of Double seesaw with See saw pipe of 7ft long 1 1/2" "B" Class GI pipe, Center pipe of 5ft long 2" "B" Class Gl pipe. Seat, LLDPE seat 4 nos with front handle, way Elbow for connecting the leg pipes(1 2" GI "B"class) to the center pipes, High quality bearings for smooth movement, foundation grip tubes are provided for erection, powder coating with latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges and ISO and CE Certification using best quality equipment, cost of all materials, labour etc complete

OD313474/2025-2026 Supplying and fixing of Curve Slide LLDPE with a main frame made of GI "B" Class pipes and a slide manufactured from LLDPE (Linear Low- Density Polyethylene). The platform height of 5 feet and chute length of about 10 feet. The model is a right-curve with attached ladder and a platform of1.5 ft × 1.5 ft. The surface finish is treated through a 7-tank process and finished with electrostatic powder coating for weather resistance and durable color retention. The equipment to be compliant with ISO and CE certification standards. cost of m aterial and labour etc complete

OD313643/2025-2026 Supplying and fixing of Revolving Platform with seat is provided with a dia of 5 ft, Platform Checker plate thickness of 4mm and 32mm G.I. B Class Support pipes MS Centre pole dia is 88mm. Heavy duty tapper roller bearing and ball bearing used for smooth rotation. Seats are made up of GI square tube. Foundation grip tubes are provided for erection. Powder coating with latest Technology of 7 tank process and electrostatic applied Pure polyester. Powder coating in attractive colours and no sharp edges. The equipment to be compliant with ISO and CE certification standards. cost of material and labour etc complete.

OD313713/2025-2026 Supply and fixing of Double swing is provided with 4nos of 1½" GI support B class pipes having the height above the ground level is 8 feet and they are connected with a top GI 2" "B" class pipe length of 10 feet with 3way High Grade Cast Iron Elbow. Two seats are made up of FRP material with iron back support and linked with non-rusted 6mm chain. Double ball bearings are used for smooth and noise free movement. Colouring is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. cost of material and labour etc complete.

OD315351/2025-2026 Supply and fixing of Merry go round 6 Seat with dia of 5 feet and 4 feet height 88 mm OD "B" class pipe, Heavy duty, Taper roller bearing and ball bearings are used for smooth rotation. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure Polyester Powder coating (for outdoor) in attractive colours and no sharp edges. Certification ISO and CE Certified

OD315381/2025-2026 Supply and fixing of Spiral slide-Junior is Provided with a LLDPE Spiral slide having height of 4', and slide support pipe having 1"G.I.'B' class pipes and centre pipe having 3" heavy pipe. The ladder is having Polypropylene Copolymer non skidfoot steps size of 510x110mm for the children safety. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure Polyester Powder coating (for outdoor) in attractive colours and no sharp edges. Certification ISO and CE Certified

OD315388/2025-2026 Supply and fixing Jungle Gym is provided with the height 5ft and length and breadth of 4ft pipes used in the fabrication are 1"and 3/4" GI 'B' class and no sharp edges. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure Polyester Powder coating (for outdoor) in attractive colours and no sharp edges. Certification ISO and CE Certified

OD315395/2025-2026 Supply and fixing of Slide LLDPE-6ft is provided with LLDPE Slide having the chute length of nearly 12 Ft and the centre support pipes height above the ground level is 6Ft. 25mm, 38mm and 32mm G.I "B" class pipes are used. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure Polyester Powder coating (for outdoor) in attractive colours and no sharp edges. Certification ISO and CE Certified

Open well and water supply Pipeline works

100.3.1.1 Earthwork in open well excavation (above water) for wells of diameter up to 2.50m in all kinds of soil and conveying and depositing the spoil within initial lead of 50m and lift up to 1.5m including neat banking

100.3.1.2 Earthwork in open well excavation (above water) for wells of diameter up to 2.50m in all kinds of soil and conveying and depositing the spoil within initial lead of 50m and lift from 1.5m to 3.0m including neat banking

100.3.1.13 Earthwork in open well excavation (in or under water) for wells of diameter up to 2.50m in all kinds of soil and conveying and depositing the spoil within initial lead of 50m and lift from 3.0m to 4.5m including neat banking

100.3.1.14 Earthwork in open well excavation (in or under water) for wells of diameter up to 2.50m in all kinds of soil and conveying and depositing the spoil within initial lead of 50m and lift from 4.5m to 6.0m including neat banking

50.6.7.1 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc

10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

4.1.4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level:In two coats

13.45.1 Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

13.9.1 Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

50.18.7.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

50.18.9.6.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.9.4.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

OD315215/2025-2026 Supply and installation of a 1 HP (0.75 kW) open well submersible pump featuring a corrosion-resistant body and a water-cooled, rewindable motor. Designed for an optimum vertical lift of 15 to 35 meters, this unit provides a reliable discharge capacity of 150 to 350 LPM, making it ideal for residential sumps and small-scale water transfer

OD315216/2025-2026 Supply and installation of a 1.5 HP (1.1 kW) open well submersible pump featuring a durable cast iron or stainless steel body and a water-cooled, rewindable motor compatible with single or three-phase power. Engineered for an optimum vertical lift of 25 to 45 meters, the unit delivers a high discharge capacity of 250 to 450 LPM depending on the required head.

18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.19.2.1 Providing and fixing gun metal non-return valve of approved quality (screwed end): 32 mm nominal bore Horizontal

18.19.3.1 Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal boreHorizontal

18.19.4.1 Providing and fixing gun metal non-return valve of approved quality (screwed end): 50 mm nominal boreHorizontal

18.33.1 Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

18.55.2 Providing and fixing PTMT stop cock of approved quality and colour.20 mm nominal bore, 89 mm long, weighing not less than 88 gms

Electrification

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.28.2 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

OD308569/2025-2026 Supplying and fixing 450mm sweep - metal blade wall fan 3 number blades and all remaining accessories including safety pin, nut bolts, washers suitable for 230V/240V single phase AC supply etc. complete as required

90.4.5.4 Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD308625/2025-2026 Supplying and fixing surface mounting decorative 9/12W led bulb with angle batten includes complete accessories duly wired up for use on 230 V AC.

OD308626/2025-2026 Supplying, fixing and commissioning of 20W LED tube light, 6500K cool day light with 5.5kV surge protection and energy efficient tube light (4 feet)

OD308630/2025-2026 Supplying and fixing 10 W/ 240 V updown outdoor LED wall light IP 65 waterproof with metallic body best wall highlighter light exterior wall mounted light

OD308629/2025-2026 Supplying and fixing dome shaped metal cut design hanging modern pedant light made up of Aluminium material including E27 base 8W LED filament bulb

OD308631/2025-2026 Supplying and fixing energy efficient 20W surface mount light white colour powder coated finish 6000K 1800 Lumen cool white colour light including its all fittings

OD308635/2025-2026 Supplying and fixing 30W LED Flood Light warm IP65 & IK07 Water Proof Protection and Imapct Proof Light 440V High Voltage Protection 6500k warm light for use on 250V AC supply.

OD308637/2025-2026 Supplying and fixing 100W LED Flood Light IP65 & IK07 Water Proof Protection and Imapct Proof Outdoor Light 440V High Voltage Protection 6500k Cool White for use on 250V AC supply

OD308640/2025-2026 Supplying and fixing LED Spike light IP 65 waterproof with metallic body 3000 K warm white 10 W/ 240 V AC supply

OD308782/2025-2026 Supplying and fixing rust resistant and weather-proof Bulk head light fixture with 10W LED lamp, IP 65 protection complete with all other accessories as required

OD308784/2025-2026 16W Garden Light for home garden waterproof warm white IP65 unbreakable garden lamps for outdoor rustproof LED Bollard Light (0.5m)

OD308788/2025-2026 Supplying and fixing cast iron post top lanterned 35W inbuild LED black colour npowder coated finish (AL die sheet metal lamp shade) cool white colour

OD308791/2025-2026 Supplying and fixing cast iron lamp pole of height 3mtrs. base dia.250mm and top dia.75mm (weight 110kg Approx) with provision for fixing MCB and cably entry/exit at bottom made of FG15 grade cast iron with MRF apoxy black finish over a coat of zinc chromate base with foundation bolts and nuts

2.3.4 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door

OD308794/2025-2026 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator. 16 way, Single door

90.11.1.16 Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.10.1 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD309131/2025-2026 Supplying and fixing 40 amps rating, 240/415 volts, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.13.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

90.12.9.2 Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.6 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)

90.6.4.54 Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run

90.12.37.1 Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 4 sq mm

90.12.1.2 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 6 sq mm

90.12.1.3 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 10 sq mm

90.12.1.5 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 25 sq mm

9.1.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC heathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.4 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 25 sq. mm (22mm)

90.12.7.3 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp

90.12.7.5 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 25 sq mm with factory made clamp

OD309135/2025-2026 Supplying and fixing Dust and vermin proof, 3 Phase Syntax Meter Board GS-MB- 6535(size 760x450x260x) and to fix KSEB meters, fuse units, CT etc. as required including fixing it on wall, making good the damages color washing etc. as required.

OD309142/2025-2026 Supplying and fixing single phase energy meter box made up of 0.7 mm GI sheet with recessed painted with the dimension of 30.5x24.5x12 cm including 40A HRC fuse

OD309144/2025-2026 Providing and fixing 21.5CM X 3CM 6 hole copper earth bench including connection with brass nut, bolt, spring, washer etc. as required.

OD309150/2025-2026 Supply, installation, testing and commissioning of 20kVA, 415V DG with a power output of 20kVA and three phase capability, 1500 rpm DG with AMF control panel with lowest noise level designed to meet latest emission norms and including change over switch

OD309145/2025-2026 Earthing with G.I. earth pipe 2.7 meter long, 40 mm diameter including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Electrical Connection

OD314843/2025-2026 Providing for drawing LT ABC through 9m polein favour of Eco Park Padiyoor under LE section Iritty. Payments will be done only after submision of bills.

Unforseen

OD318081/2025-2026 Unforseen item