Loading…
Loading…
Tender Value
₹15.1 L
EMD Value
₹30,270
Closing Date
8 Oct 2026, 11:00 am7d left
Executive Engineer Chamba Division HPPWD Chamba
Executive Engineer Chamba Division HPPWD Chamba
Restoration of Link road to village Bani Km. 0/0 to 1/360 and Karian Bharian Kothi road Km. 0/0 to 2/240 (SH P/L Tarring/Patch on various Rds under PDNA-2025)
2026_PWD_144777_1
NO. WA-II-Cha/2026-27- 21323-72 dte 28-09-2026
Open Tender
Civil Works
Percentage
30 days
Chamba
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
₹30,270
1 Oct 2026
1 Oct 2026
8 Oct 2026
1 Oct 2026
8 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Providing, laying, spreading and compacting stone aggregates of 53 to 22.4mm (fifty three millimetre to twenty two point four millimetre) size 75mm (seventy five millimetre) compacted thickness to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grades and camber applying and brooming, stone screening type-"B" of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18 cubic metre (zero point one eight cubic metre) per ten square metre to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-III as MORD Technical Specification section 400 by mannual means including hauling of material in all leads, lifts as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. | 18.38 | Per Cubic Metre. | 4,129.18 | ₹75,894.33 |
| 2.01 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 kg. ( zero point eight five kilogram) per Square Metre) of road surface using mechanical means bitumen emulsion pressure distributor complete as per MORD technical Specification section 500 or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. | 245 | Per Square Metre. | 102.5 | ₹25,112.5 |
| 3.01 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 Kg. (zero point two seven five kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with Hydraulic brooms as per Technical Specification Clause 503 or as directed by the engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. | 3,150 | Per Square Metre. | 34.9 | ₹1,09,935 |
| 4.01 | Providing, laying and rolling of open-graded premix carpet of 20mm (twenty millimetre) compacted thickness composed of type-"A" 13.2 mm to 5.6 mm ( Thirteen decimal two millimetre to five decimal six millimetre ) aggregate at the rate of 0.27 cum (zero decimal two seven cubic metre) pre-mixed with bitumen binder grade VG-10 (Viscosity Grade ten) at the rate of 14.6 kg. (fourteen decimal six kilogram) per ten square metre of road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in suitable hot mix plant 30/40 (thirty / forty ) tonne per hour capacity transporting mixed materials with tipper and laying manually to required grade and camber and rolling with three wheel 80-100 (eighty - hundred ) KN static road roller finished to required level and grades to be followed by seal coat of type-”B” complete as per MORD Technical Specification section 500 including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. | 3,150 | Per Square Metre. | 304.9 | ₹9,60,435 |
| 5.01 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B with bitumen grade VG-10 (Viscosity grade ten) at the rate of 6.8 Kg. (six decimal eight kilogram) premixed with 0.06 (zero decimal zero six) cubic metre of fine aggregate per ten square metre premixed in mini hot mix plant, transporting mixed material with tipper and laying of mixed materials manually and rolling with three wheel 80-100 (eighty- hundred ) KN static roller complete as per MORD Technical Specification section 500 including carriage of materials within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. | 3,150 | Per Square Metre. | 108.6 | ₹3,42,090 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_215400.xls
BOQ • 0.31 MB
Biddocument.pdf
Tender Documents • 5.00 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .