RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Executive Table ( 27 pieces ) Technical Specifications 1/18 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Knocked Down To Be Assembled At Consignee Site By The Seller Frame type Free standing * Understructure of table Four legs * Storage provided Both side Both side Keyboard tray Not provided Not provided Foot rest Not Provided Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Leg Material Other wood Other wood MISC Table top long sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided 4 Nos. at bottom * DIMENSION Thickness of table top ±2 mm 25 25.0 Thickness of gable end and modesty panel ±2mm 19 * Length of table top ±10 mm 1800 1800.0 Depth of table ±10 mm 900 900.0 2/18 Height of table ±10 mm 725 725.0 Dimension of leg(mmXmm) ±5mm 40mmX40mm 40mmX40mm STORAGE UNIT Number of Storage unit provided Double storage Double storage Width of storage unit ±10mm 400mm * Depth of storage unit in mm (±10mm) 700 * Height of smallest storage unit ±5mm 125mm * Height of medium storage unit ±5mm N.A * Height of largest storage unit ±5mm 255mm * KEYBOARD TRAY Type of keyboard tray N.A * Material of keyboard tray and Right angle L- type supporting bracket N.A * Keyboard adjustablity N.A * fixing of supporting bracket N.A * Length of telescopic channe±l0mm N.A * Average weight of telescopic channel ±50Gms N.A * Keyboard front width±10mm N.A * Keyboard depth±10mm N.A * Keyboard height±10mm N.A * Finish of exposed edges of keyboard tray N.A * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest N.A * Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest N.A * 3/18 ±10mm Finish of exposed edges N.A * Material thickness of footrest ±2mm N.A N.A COLOUR & FINISH Table top finish Laminate in colour with swede finish 0.6-0.8mm thickness of type S
RequiredF or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side * Table top shade As per Buyer's choice * WARRANTY Warrantee period in number of years 1 1 CERTIFICATION Test reports to be furnished to buyer on demand YES * Product having BIFMA certification NO YES
RequiredNO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
