Project No.47/2021-22 PHC maintenance in Alayamon GP

Amount

compound wall painting

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.71 : Lettering with black Japan pint of approved brand and manufacture

west side building

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood

50.9.5.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.111.1 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood)

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

North side building

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.20.1 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement

Interlocking

od1643644/2021_2022 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.<br>All kinds of soil (DAR 2.28.1)......

od1643645/2021_2022 : Interlocking Concrete Block Pavement<br><br>Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504....

75.8.1.1.A : Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate: 4 course aggregate) laid to required slope as required including compaction, finishing and tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixed in concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

Entrance Bord

25.1 : Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

od1643646/2021_2022 : Designing, fabricating,and fixing in position Curtain Wall with<br>Aluminium<br>Composite Panel Cladding, with open grooves for linear as well as<br>curvilinear portions of the building ,<br>for all heights and all levels etc. including:<br>a) Structural analysis & design and preparation of shop<br>drawings for pressure<br>equalisation or rain screen principle as required, proper drainage of water to<br>make<br>it watertight including checking of all the structural and functional design.<br>b) Providing,<br>fabricating and supplying and fixing panels of aluminium composite<br>panel cladding in pan shape in<br>metalic colour of approved shades made out of<br>3mm thick aluminium composite panel material<br>consisting of 3mm thick FR grade<br>mineral core sandwiched between two Alumini um sheets (each0.5mm<br>thick). The<br>aluminium composite panel cladding sheet shall be coil coated, with Kynar<br>500based<br>PVDF / Lumiflon based fluoropolymer resin coating of approved colour<br>and shade on face # 1 and<br>polymer (Service) coating on face # 2 as specified using<br>stainless steel screws, nuts, bolts, washers,<br>cleats, weather silicone sealant, backer<br>rods etc.<br>c) The fastening brackets of Aluminium alloy 6005<br>T5 / MS with Hot Dip Galvanised<br>with serrations and serrated washers to arrest the wind load movement,<br>fasteners,<br>SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to<br>prevent bimetallic contacts all complete required to perform as per specification<br>and drawing The item includes<br>cost of all material & labour component, the cost of<br>all mock ups at site, ,cleaning and protection of the<br>curtain wall<br>with aluminium composite panel cladding till the handing over of the building<br>for<br>occupation. Base frame work for ACP cladding is payable under the relevant<br>aluminium item.s<br>The Contractor shall provide curtain wall with aluminium<br>composite panel cladding, having all the<br>performance characteristics all complete<br>, as per the Architectural drawings, as per item description, as<br>specified, as per the<br>approved shop drawings and as directed by the Engineer-in-Charge.<br>However,<br>for the purpose of payment, only the actual area of<br>the curtain wall with Aluminum Composite Panel<br>Cladding (including width of<br>groove) shall be measured in sqm. up to two decimal places. (od based on 25.7 and prevalling market rates and installation charges)

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od1643647/2021_2022 : Suplying and Fixing stainless steel brushed metal name letters 25cm - 35 cm size including all charges

badarudeen

ANIZHAM CONSTRUCTIONS

AYOOB KHAN S

Bidder Name

badarudeen

AYOOB KHAN S

ANIZHAM CONSTRUCTIONS

VISHNU DUTT S