REPAIRS AND POLISHING OF WOODEN FURNITURE AT GE DEHU ROAD

Amount

Bed Plywood Top (FD-246 & 247):- Removing the unserviceable components/parts without damaging the other components/ parts or structure of the Bed Plywood top, supply and fixing new components/ parts as under, as shown in drawing and directed by Engr-in-Charge.

Long rails of size 1980x900x35mm made of 1st class hard wood teak of bed plywood top.

Teak face veneer ply wood 3mm thick for outer and inner sides of head board with teak wood beading half round alround of bed plywood top.

All as per Srl. item No. 1.02 here-in-before but foot board.

Supply and fixing in replacement of legs of size 60x60x660mm made of 1st class hard wood teak of head board of bed plywood top.

All as per Srl. Item No. 1.04 here-in-before but legs of size 60 x 60 x 520mm of foot board of bed plywood top.

Supply and fixing of plywood BWR Gde as per IS:303 of size 1980 x 900 x 12mm thick (Make of Plywood:- Greenply/Duro /Century Ply)

Supply and fixing in replacement of stiffners of size 60x40x900mm made of 1st class hard wood teak of bed ply top.

Supply and fixing in replacement of complete head rest with legs of bed plywood top shape and size as shown on drg.

All as per Srl. Item No. 1.08 here-in-before but foot rest of bed plywood top.

S & F of 1st class hard wood wooden bracket of size 150x150x35mm with steel screw between the long rail and legs of head board and foot board of bed plywood top.

Chair Dnning (FD/MAP-II/05):-Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair, supply and fixing new parts as under made out of 1st class hard wood teak as shown on drg and specified.

Rear leg.

Front leg.

Side/Front/Rear rails.

Back rest.

Stiffener (Side & Central one).

Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining.

Tightening of all parts/joints of whole Chair dining with bamboo pins.

S&F in replacement of PVC seat 4mm thick with holes & screwed with frame all as per drg or as directed by Engr-in-Charge.

Table dining 4 persons (FD/MAP-II/03)

Supply and fixing in replacement of top of table dining 4 persons of size 1200x900mm made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg.

Replacement of legs of table dinning 4 persons with new legs of size 90x45x750mm made of 1st class hard wood teak, size and shape all as shown on drg.

All as per Srl. Item No. 3.02 but long rails table dinning 4 persons.

All as per Srl. Item No. 3.02 but side rails table dinning 4 persons.

All as per Srl. Item No. 3.02 but wooden bracket of size 100x100x35mm for table dinning 4 persons.

Bin Linen Multipurpose:- (FD/E6/MAP/09)

Supply and fixing in replacement of unserviceable pair of shutters made out of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including continuous piano type hinges and Magnatic Catcher of size and shape all as spd and shown in drg or as directed by Engr-in-Charge.

All as per srl item No 4.01 here-in-before but side door shutter.

All as per Srl item No 4.01 here-in-before but side all as shown on drg.

All as per item No. 4.01 here-in-before but top.

All as per item No. 4.01 here-in-before but bottom out of only 18/19mm thick MR Gde plywood of size and shape as shown on drg.

Supply and fixing in replacement of back with 12mm thick MR Gde plywood of size and shape all as sqd and shown on drg.

Supply and fixing in replacement drawers made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg.

Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beadling all as shown on drg.

Auditorium Chair High Back (TP)

S&F in replacement of seat with cushion and Tapestory cloth . Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM as approved by GE).

All as per srl item No 5.01 here-in-before but back.

M&L to repair of joints and members in accordance with standard specifications all as directed by Engr-in-Charge.

Auditorium Chair Med Back (TP)

S&F in replacement of of seat with cushion and Tapestory cloth . Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM as approved by GE).

All as per srl item No 6.01 here-in-before but back.

M&L to repair of joints and members in accordance with standard specifications all as directed by Engr-in-Charge.

Table dining 6/8 persons (FD-273, FD/MAP-II/03)

Supply and fixing in replacement of top of table dining 6 persons of size 1500x900mm made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg.

All as per Srl. Item No. 7.01 but top of Table dining 8 persons of size 1800x900mm.

Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x750mm made of 1st class hard wood teak, size and shape all as shown on drg.

All as per Srl. Item No. 7.03 but long rails for 6 persons size and shape all as shown on drg.

All as per Srl. Item No. 7.03 but long rails for 8 persons.

All as per Srl. Item No. 7.03 but side rails for 6/8 persons.

All as per Srl. Item No. 7.03 but wooden bracket of size 100x100x25mm for table 6/8 persons.

Table Peg (FD-236 & 277)

Supply and fixing in replacement of top of table peg with new top of size 450x300mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make of MDF board:- Action(Tesa)/Greenply/Archidply)

Supply and fixing in replacement of legs of peg table with new leg of size 50x30mm made of 1st class hard wood teak size & shape as shown on drg.

All as per item No 8.02 here-in-before but long batten/rail of size 50x25mm of table peg.

All as per item No 8.02 here-in-before but short rail/stiffener of size 50x25mm of table peg.

Table Writing (FD-249 & 275)

Supply and fixing in replacement of top of table writing with new top of size 1145x550mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround to top of table writing size and shape all as shown on drg . (Make of MDF board:- Action(Tesa)/Greenply/Archidply)

Supply and fixing in replacement of legs of table writing with new leg of size 60x30x750mm made of 1st class hard wood teak size and shape all as shown on drg.

All as per Srl. Item No. 9.02 but stiffners (Centre) of size 50x25x 1145mm made of 1st class hard wood teak.

All as per Srl. Itme No. 9.02 but side stiffener/rails of size 50x25x550mm of Table writing.

S & F in replacement of drawers with new drawers made of 18/19mm thick MDF board exterior gde natural teak face shade on front side including with 6 mm thick MDF borad to bottom of drawers including aluminium anodised knob and all as shown on drg.

S & F in replacement of entire cup board of table writing made of 18/19mm thick MDF board exterior gde including wall catcher size and shape all as shown on drg.

All as per Srl. Item No. 9.06 but door shutter of cupboard.

Table dressing Ladies with Mirror (FD-251, FD/MAP-II/07)

Supply and fixing in replacement of looking mirror of table dressing ladies with new looking mirror of 5 mm thick of Make:- Saint Gobain/ Modi Guard of size and shape as shown on drg and as directed by Engineer -in- Charge.

Supply & fixing in replacement of entire frame of mirror of table dressing ladies made of teak wood of size and shape as shown on drg and directed by Engineer-in-Charge.

Supply & fixing in replacement of 6mm thick MR Gde plywood of back of Mirror of table dressing ladies.

S & F of entire cabinet/box of table dressing ladies made of 18/19mm thick MR Gde plywood covered with with 1.0mm thick laminated sheet with 4mm thick teak wood beading all as shown on drg.

All as per Srl. Item No. 10.04 but drawers of table dressing ladies.

Teapoy:- (FD-232 & 278 & 382)

Supply and fixing in replacement of top of teapoy of size 600x450mm with new top made of 18/19mm thick MDF board exterior grade including 4mm thick teak wood beading alround all as shown on drg. (Make of MDF board:- Action(Tesa)/Greenply/Archidply)

Supply and fixing in replacement of legs of teapoy with new leg of size 60x30mm made of 1st class hard wood teak of size and shape as shown on drg.

All as per item No 11.02 here-in-before but long batten/rail of size 50x25mm & shape as per shown on drg.

All as per item No 11 .02 here-in-before but short stiffener/rail of size 60x25mm and shape as per showon on drg.

Table bed side (FD-210 & 276)

Supply and fixing in replacement of top of table bed side with new top made of 18/19mm thick MDF board teak face shade exterior gde including 4mm thick TW edging all as shown on drg.

All as per Srl. Item No. 12.01 but sides of table bed side.

All as per Srl. Item No. 12.01 but bottom of table bed side.

All as per Srl. Item No. 12.01 but shelf of 12 mm thick of table bed side.

Supply and fixing in replacement of back of table bed side made of 6mm thick MDF board all as specified and shown on drg.

Table 900x600x760mm with/without drawer (FD-224 & 284)

Supply and fixing in replacement of top of table 900x600x760mm made of 18/19mm thick MDF board exterior grade including 4mm thick TW edging/beading alround to top to table with or without drawers, size and shape all as shown on drg. (Make of MDF board:- Action(Tesa) / Greenply / Archidply).

Supply and fixing in replacement of legs made of 1st class hard wood teak of size 60x30x750mm and shape all as shown on drg.

All as per Srl. Item No. 13.02 but stiffner (centre one) of size 50x25mm .

All as per Srl. Item No. 13.02 but side stiffner.

All as per Srl. Item No. 13.02 but long rails .

All as per Srl. Item No. 13.02 but short rails .

S & F in replacement of drawers with new drawers made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging including with 6 mm thick MDF board to bottom of drawers including almn anodised knob and all as shown on drg.

Table Centre (FD-274)

Supply and fixing in replacement of top of table centre with new top of size 900x450mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make of MDF board:- Action(Tesa)/Greenply/Archidply).

Supply and fixing in replacement of legs of table centre with new leg of size 60x30mm made of 1st class hard wood teak size and shape as shown on drg.

All as per Srl. item No. 14.02 here-in-before but long rail of size 50x25mm.

All as per Srl. item No. 14.02 here-in-before but short rail/stiffener of size 50x25mm.

Book Case (FD-237)

Supply and fixing in replacement of Top of book case made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheel with 4mm thick teak wood beading alround size and shape as shown on drg.

All as per Srl. Item no. 15.01 but sides of book case.

All as per Srl. Item No. 15.01 but shutters of book case including piano hinges and aluminium anodized knob.

Supply and fixing in replacement of bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beadling all as shown on drg.

All as per Srl. Item No. 15.04 but shelf of book case.

Supply and fixing in replacement of back of book case made of 6mm thick MR Gde plywood all as shown on drg.

Supply and fixing in replacement of leg with batten frame of book case made of 1st class hard wood teak of size and shape as shown on drg.

Table dressing gents with Mirror (FD-230)

Supply and fixing in replacement of looking mirror to table dressing gents with new looking mirror 5 mm thick of Make:- Saint Gobain/Modi Guard of size and shape as shown on drg and as directed by Engineer -in- Charge.

S & F in replacement of entire cabinet/box made of 12mm thick MDF board teak face shade exterior gde including 4mm thick TW edging all as shown on drg

Supply and fixing in replacement of drawers to table dressing gents of 12mm thick MDF board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black) all as specified and shown on drg.

Supply and fixing in replacement of frame of mirror made of 1st class hard wood teak incl key plate size and shape as shown on drg.

Supply and fixing in replacement of back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg.

Side Board (FD-241)

Supply and fixing in replacement of unserviceable pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheet including continuous piano type hinges and hasp & stapple of size and shape all as spd and shown in drg including aluminium anodized knob as shown on drg.

All as per Srl item No 17.01 here-in-before but side of side board all as shown on drg.

All as per item No. 17.01 here-in-before but top of side board.

Supply and fixing in replacement bottom of side board made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg.

Supply and fixing in replacement of back of side board with 6mm thick MR Gde plywood of size and shape all as sqd and shown on drg.

Supply and fixing in replacement drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg.

Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beadling all as shown on drg.

Supply and fixing in replacement of leg with batten frame of side board made of 1st class hard wood teak of size and shape as shown on drg.

Sofa Set 5/4 Seater (FD-373)

Supply and fixing in replacement of front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg.

All as per item No. 18.01 here-in-before but arms.

All as per item No. 18.01 here-in-before but side rails.

All as per item No. 18.01 here-in-before but front & back rail of single seater sofa.

All as per Srl item No 18.01 here-in-before but front/back rail of sofa three seater (long seat).

Supply and fixing in replacement of cushions of 100mm thick flexipuff/ U Foam cushion of 40 density of Make:- Sleepwell/Cor-foam/ Kurl-on, covered with new tapestory cloth (not less than Rs 250/- per running mtr) complete all as specified and directed by the Engineer-in- charge.

Chair easy cushioned:- (FD-358) Removing of unserviceable/broken parts of Chair easy cushion of size 545x510x740mm without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg, specified and as directed by Engr-in-Charge.

12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM as approved by GE).

All as per srl item No 19.01 here-in-before but back of chair easy cushioned.

Supply and fixing only seat cover to tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM).

Front leg.

Rear leg.

Back frame

Side rail

Arms with cushion.

Tightening of all parts/joints of entire Chair easy cushion with bamboo pins.

Locker bed side (Wooden) (FD-222)

Supply and fixing in replacement of door shutter of made out of 18/19mm thick plywood MR grade covered with 1mm thick laminated sheet of outer side of shutter with teak wood beading of 4mm thick all round to locker bed side wooden including fixing with all necessary fittings 02 Nos piano hinges of SS, 02 Nos Aluminum handles of 100mm long and 01 No Aluminium haps and stapple of 75mm long of all as per drg and as per direction by Engr-in-Charge. (Make of Plywood:- Greenply/Duro /Century Ply).

All as per Srl. Item No. 20.01 here-in-before but top of Locker bed side wooden.

All as per Srl. Item No. 20.01 here in before but sides of locker bed side wooden.

All as per Srl. Item No. 20.01 here in before but bottom of locker bed side wooden made only 12mm thick plywood MR Gde.

All as per Srl. Item No. 20.04 here in before but partition of locker bed side wooden made only 12mm thick MR Gde plywood.

All as per Srl. Item No. 20.05 here in before but shelf of locker bed side wooden.

All as per Srl. Item No. 20.05 here in before but back plywood 12mm thick MR Gde of locker bed side wooden.

Supply and fixing in replacement of teak wood frame with legs to bottom of locker bed side wooden all as per shown on drg and directed by Engr-in-Charge.

Supply and fixing in replacement of MS chromium plated socket for fixing 19mm dia conduit pipe hanging rod all as specified and shown on drg.

Supply and fixing in repairs 19mm dia & 1.0mm wall thickness conduit pipe of SS as in hanging rod all as specified and shown on drg.

Material and labour for french polishing with best quality french polish on exposed surfaces to bed plywood top (except top ply) upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-246 & 247)

All as per Srl. Item No. 21 here-in-before but Chair dinning.(FD/MAP-II/05)

All as per Srl. Item No. 21 here-in-before but Table dinning 4 persons(FD/MAP-II/03)

All as per Srl. Item No. 21 here-in-before but Bin linen multipurpose (FD/E6/MAP/09).

All as per Srl. Item No. 21 here-in-before but table dinning 6/8 persons. (FD-273, FD/MAP-II/03)

All as per Srl. Item No. 21 here-in-before but Table Peg (FD-236 & 277)

All as per Srl. Item No. 21 here-in-before but Table Writing FD-249 & 275)

All as per Srl. Item No. 21 here-in-before but Table dressing ladies (FD-251, FD/MAP-II/07)

All as per Srl. Item No. 21 here-in-before but Teapoy (FD-232 & 278)

All as per Srl. Item No. 21 here-in-before but Table bed side (FD-210 & 276)

All as per Srl. Item No. 21 here-in-before but Table 900x600x760mm with/without drawers. (FD-224 & 284)

All as per Srl. Item No. 21 here-in-before but Table Centre. (FD-274)

All as per item No 21 here-in-before but Book Case wooden. (FD-237)

All as per item No 21 here-in-before but Table dressing gents. (FD-230)

All as per item No 21 here-in-before but Side Board (FD-241)

All as per item No 21 1-in-before but Sofa set 5 seater. (FD-373)

All as per item No 21 here-in-before but Sofa set 4 seater. (FD-373)

All as per item No 21 here-in-before but Chair easy cushioned (FD-358).

M&L for fixing of hard PVC shoes to legs of any type of wooden furniture with screw all as directed by Engr-in-Charge.

Material and labour for painting of locker bed side wooden with white paint in inner,botoom and back side of locker after wood primer incl preparation of surfaces by removing the old polish by scrubbing with emery paper upto smooth surface and providing putty complete all as directed by Engr-in-Charge.

VARAROHA BUILDERS

Mahesh Traders

DR J S CHADHA AND SONS

Yash enterprises