Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC Technically qualified lowest offered bidder | |
| 2 | L2₹44.6 L+₹28.5 L (177.8%)Rejected-Finance | L2 | Rejected-Finance Technically qualified, but not lowest offered bidder |
Tender Value
Refer Docs
EMD Value
₹31,850
Closing Date
7 Jul 2023, 4:00 pmClosed
GM (O and M)
Kochi Metro Rail Limited, DCOS,First Floor, Muttom Depot,Aluva-683106 Kerala, India
Anti-Corrosive Painting of Check Rail Brackets in R1 and R2A section, with Replacement of Fittings
2023_KMRL_574619_1
KMRL/O and M/OSC/CTR/2023-24/02
Open Tender
Paint / Enamel Works
Item Rate
182 days
As per tender document
Please refer Tender documents.
21 documents required · 21 mandatory
₹5,900
₹31,850
Yes
Kochi Metro Rail Limited, DCOS,First Floor, Muttom
11 Sept 2023
6 May 2023
10 Jul 2023
6 May 2023
7 Jul 2023
16 May 2023
6 May 2023 - 11 May 2023
12 May 2023
Amount
Anti-Corrosive Painting of Check Rail Brackets in R1 and R2A section, with Replacement of Fittings
Anti-corrosive painting of in-service check rail brackets of sharp curves with (1) Priming coat - One coat of ready mix paint zinc chromate priming to IS:104, followed by one coat of zinc chrome red oxide priming to IS :2074 and (2) finishing coat –two coats of aluminium paint to IS 2339- duly removing the check rail brackets, fittings, anchor bolts of the brackets and re-fixing the painted/supplied brackets and duly replacing the new fittings (Hot dip galvanised) and retightening all the fastenings with all contractor’s labour, brushes, tools, paint, transportation with all lead and lift and as directed by the Engineer-in-charge. Before painting all loose rusted and dirt on the bracket surface shall be removed thoroughly by wire brushing or by mechanical means. Grease and oil shall be removed by use of appropriate solvent. Use of detergent followed by water washing should also be done to ensure removal of oil and grease apart from the greasing compound. All the above works shall be carried out during night PTW hours at Viaduct after revenue services. The released fittings shall be handed over by the contractor at Muttom depot stores.
Supply of Check MS rail bracket as per drawing given in clause 3.5 of Employers requirement
Supply of HSFG bolt full thread, with nut and washer - M20x75(1bolt + 1nut + 3 washer) grade 8.8S(Hot dip 80 micron)
Supply of HSFG nuts with washer - M24( 1nut + 2 washer) grade 8.8S (Hot dip 80 micron)
SALN ENGINEERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .