Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAdmitted-Finance 37110 INDUSTRIAL ESTATE KOPARGAON 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L1 | Admitted-Finance | |
| 2 | L2₹17.1 L+₹3.6 L (27.0%)Admitted-Finance 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L2 | Admitted-Finance | |
| 3 | L3₹19.2 L+₹5.7 L (42.1%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹21.0 L+₹7.5 L (55.4%)Admitted-Finance C 347 ARBUDHA NAGAR ODHAV AHMEDABAD | AHMEDABAD | AHMEDABAD | GUJARAT | 382415 | L4 | Admitted-Finance | |
| 5 | L5₹26.3 L+₹12.8 L (95.0%)Admitted-Finance SUB PLOT NO 02 FP NO 24 BEHIND NUTUN VIDHYALAYA ON SAMA SAVLI ROAD SAMA VADODARA GUJARAT 390 024 | VADODARA | VADODARA | GUJARAT | 390024 | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | swastik industries L1 | shreekalyanwoodworks L5 | Navkar Enterprises L4 | Pratik Enterprise L2 | shekhar & company L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00SCH 'A' PART-I (WOODEN FURNITURE) | ||||||||
| 1.01 | CHAIR DINING WITH CUSHION (FD/MAP-II/04)
Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be Melamyne polished with high gloss finish.Rest all as per drg. | 18 | Each | - | 2,296 ₹41,328 | 2,700 ₹48,600 | 2,074 ₹37,332 Lowest | 2,500 ₹45,000 |
| 1.02 | TABLE CARD (FD-352)
(a) Overall size shall be 900mm long,900mm wide,760mmhigh.
(b) All wood shall be of 1st class hard wood (teak wood) free from knots.
(c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth.
(d) 4 mm thick teak wood edging shall be provided around the top.
(e) Irrespective od what is shown in drawing, 25mmdia decorative brass knobs shall be provided to each drawers.
(f) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish.
(g) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs.
(h) Rest all as shown on drawing. | 6 | Each | - | 3,996 ₹23,976 | 7,200 ₹43,200 | 4,200 ₹25,200 | 3,000 ₹18,000 Lowest |
| 1.03 | TABLE DINING 900X900X760 MM (FD-291)
(a) Overall size shall be 900mm long,900mm wide,760mmhigh.
(b) All wood shall be of 1st class hard wood (teak wood) free from knots.
(c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth.
(d) 4 mm thick teak wood edging shall be provided around the top.
(e) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish.
(f) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs.
(g) Rest all as shown on drawing. | 19 | Each | - | 2,696 ₹51,224 Lowest | 3,600 ₹68,400 | 2,800 ₹53,200 | 4,000 ₹76,000 |
| 1.04 | MIRROR DRESSING GENTS (FD/E6/MAP/16)
(a) All woodwork shall be kiln-seasoned first-class hardwood (MP teak).
(b) 18mm thick, pre-laminated particleboard on both faces with 4mm teak wood edging shall be used in cabinet Sides, top & bottom.
(c) 12mm thick, BWR phenol Bonded plywood Commercial (both faces) Backing to the looking Mirror and back side Cabinet.
(d) The mirror shall be 5.5mm thick polished sheet glass Supported on runner/ glass holder. 5.5mm thick glass shelves Continuous (piano) hinges brass, bright finish for Cabinet openable side.
(e) All woodwork shall be melamyne polished. Rest all as directed by the Engr-in-Charge. | 16 | Each | - | 3,496 ₹55,936 | 4,500 ₹72,000 | 3,450 ₹55,200 Lowest | 7,000 ₹1,12,000 |
| 1.05 | TABLE COMPUTER (FD/E6/MAP/03)
DIMENSION:-Overall size of top shall be 900mm long, 561.20 mm wide and 750mm high.
DESCRIPTION:-All prelaminated particle board used in manufacturing of top, shelves, drawers, trays shall be of 18mm thick prelaminated HDHMR MDF board.The frame of table shall be of 25MM square pipe of wall thickness not lss than 1.6mm.The top of table shall be provided with 4mm thick teak wood beading.The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage. Each leg shall be provided with rectangular PVC cover made to shape on front sides only.The drawers shall be provided with telescopic channel 300 mm long. The legs shall also be provided with nylon buffers .Rest all as per drg.
FINISH:- All wood surfaces shall be Melamyne polished with high gloss finish. Rest all as per drg. | 4 | Each | - | 5,460 ₹21,840 | 5,400 ₹21,600 | 3,800 ₹15,200 Lowest | 5,000 ₹20,000 |
| 1.06 | CHAIR DINING CB (FD-279)
(a) All diamension shall be shown on drawing.
(b) All wood shall be first class hard wood (teak wood) free from knots.
(c) Seat shall be woven with plastic cane of 2 mm wide 0.4mm thick Shah or premier brand in Godrej pattern.
(d) Hard PVC ring shall be provided to bottom of all legs with screw
(e) All wood surfaces exposed to view when placed in position shall be Melamine polished with high glows finish.
(f) All joints and fixing shall be in accordance with standard workmanship/specifications.
(g) Rest all other items, fittings and fixtures shall be as per shown on drawing. | 85 | Each | - | 1,696 ₹1,44,160 | 1,404 ₹1,19,340 | 1,274 ₹1,08,290 Lowest | 1,300 ₹1,10,500 |
| 1.07 | TABLE 6'X 3' (FD-300)
Overall size shall be 1800mm long, 900mm wide and 760 mm high. All wood shall be of first class hard wood Teak (MP/CP). Legs shall be four in numbers. Legs hsall be 110mmx110mm in section and 741mm high. Legs shall be joined together at the top of legs by 25mmx100mm in section top rail provided in long and hosrt sides. 5mmx5mm in section verticaal grooved shall be provided in the middle in the visible two sides of all legs when placed position. Eight numbers of 25mmx3mm flat iron 200mm ongs bent to right angle shape corners hsall be provided at all the junction of top rails meeting wise leg. Wooden corners shall be providedin side of four ocrners as directed by E ngineer-in-Charge, irrespective of whether shown on drawing or not. Pre-laminated particle board, 19mm thick with teak veneer shaded at top and plag white on other side shall be provided as top of the table. 25mm x 40 mm teak wood edging shall be provided all round the top edges of the table. All wood surfaces exposed to view when placed in position shall be Melamyne police wth glossy finish as directed by the Engineer-in-Charge. | 9 | Each | - | 9,600 ₹86,400 | 9,000 ₹81,000 | 7,800 ₹70,200 | 5,000 ₹45,000 Lowest |
| 2.00SCH 'A' PART-II (STEEL FURNITURE) | ||||||||
| 2.01 | ALMIRAH LARGE STEEL WITH SHELF (FD-1031)
(a) DIMENSION: Overall size shall be all as shown on the drawing. (b) DESCRIPTION: The top sides, back, bottom, and front shall be of 1mm thick mild steel sheet. Base shall be made of 02 Nos mild steel sheet channels back welded to the bottom of the almirah. 04 shelves equally spaced making 05 compartments shall be provided with a concealed locking system without handles as approved by GE. The legs of the almirah should be covered with 1 mm mild steel. (c) FINISH: All steel surfaces shall be pretreated with epoxy powder coating by 07 tank process and oven-dried with the following specifications: (i) Dry film thickness of more than 45 microns. (ii) Salt spray test to withstand more than 1000 hrs. (iii) Adhesion as per DN 53152 standards. (iv) Pencil scratch hardness more than 2H. (v) The color shade of the outer steel body should be in the dual shade. (Shades as decided by GE). (d) NOTE: Test certificates of powder coating are to be submitted. (e) Rest all as shown on the drawing. | 4 | Each | 10,500 ₹42,000 Lowest | 12,496 ₹49,984 | 13,500 ₹54,000 | 11,900 ₹47,600 | 13,500 ₹54,000 |
Tender Value
Refer Docs
EMD Value
₹39,500
Closing Date
16 May 2026, 6:00 pmClosed
CWE AHMEDABAD
CWE Ahmedabad Hanuman Camp Shahibaug Ahmedabad PIN-380003
SPECIAL REPAIRS / REPLACEMENT OF CONDEMNED FURNITURE ARTICLES FOR OFFRS/ JCOS/ ORS MD ACCN AND OTM ACCN AT MIL STN GANDHINAGAR
2026_MES_760880_1
87504/E8
Open Tender
Civil Works
Item Rate
120 days
ARMY AREA GANDHINAGAR
AS PER TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (A) GANDHINAGAR
₹39,500
Yes
30 May 2026
18 Apr 2026
23 May 2026
18 Apr 2026
16 May 2026
4 May 2026
18 Apr 2026 - 3 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | SCH 'A' PART-I (WOODEN FURNITURE) | - | - | - | - |
| - | CHAIR DINING WITH CUSHION (FD/MAP-II/04)
Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be Melamyne polished with high gloss finish.Rest all as per drg. | 18 | Each | - | - |
| - | TABLE CARD (FD-352)
(a) Overall size shall be 900mm long,900mm wide,760mmhigh.
(b) All wood shall be of 1st class hard wood (teak wood) free from knots.
(c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth.
(d) 4 mm thick teak wood edging shall be provided around the top.
(e) Irrespective od what is shown in drawing, 25mmdia decorative brass knobs shall be provided to each drawers.
(f) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish.
(g) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs.
(h) Rest all as shown on drawing. | 6 | Each | - | - |
| - | TABLE DINING 900X900X760 MM (FD-291)
(a) Overall size shall be 900mm long,900mm wide,760mmhigh.
(b) All wood shall be of 1st class hard wood (teak wood) free from knots.
(c) Top of table shall be of 18mm thick plain particle board as specified here-in-before coverred with green baize cloth.
(d) 4 mm thick teak wood edging shall be provided around the top.
(e) All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish.
(f) Hard rubber/PVC shoe of 25 mm dia shall be provided at bottom of all legs.
(g) Rest all as shown on drawing. | 19 | Each | - | - |
| - | MIRROR DRESSING GENTS (FD/E6/MAP/16)
(a) All woodwork shall be kiln-seasoned first-class hardwood (MP teak).
(b) 18mm thick, pre-laminated particleboard on both faces with 4mm teak wood edging shall be used in cabinet Sides, top & bottom.
(c) 12mm thick, BWR phenol Bonded plywood Commercial (both faces) Backing to the looking Mirror and back side Cabinet.
(d) The mirror shall be 5.5mm thick polished sheet glass Supported on runner/ glass holder. 5.5mm thick glass shelves Continuous (piano) hinges brass, bright finish for Cabinet openable side.
(e) All woodwork shall be melamyne polished. Rest all as directed by the Engr-in-Charge. | 16 | Each | - | - |
| - | TABLE COMPUTER (FD/E6/MAP/03)
DIMENSION:-Overall size of top shall be 900mm long, 561.20 mm wide and 750mm high.
DESCRIPTION:-All prelaminated particle board used in manufacturing of top, shelves, drawers, trays shall be of 18mm thick prelaminated HDHMR MDF board.The frame of table shall be of 25MM square pipe of wall thickness not lss than 1.6mm.The top of table shall be provided with 4mm thick teak wood beading.The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage. Each leg shall be provided with rectangular PVC cover made to shape on front sides only.The drawers shall be provided with telescopic channel 300 mm long. The legs shall also be provided with nylon buffers .Rest all as per drg.
FINISH:- All wood surfaces shall be Melamyne polished with high gloss finish. Rest all as per drg. | 4 | Each | - | - |
| - | CHAIR DINING CB (FD-279)
(a) All diamension shall be shown on drawing.
(b) All wood shall be first class hard wood (teak wood) free from knots.
(c) Seat shall be woven with plastic cane of 2 mm wide 0.4mm thick Shah or premier brand in Godrej pattern.
(d) Hard PVC ring shall be provided to bottom of all legs with screw
(e) All wood surfaces exposed to view when placed in position shall be Melamine polished with high glows finish.
(f) All joints and fixing shall be in accordance with standard workmanship/specifications.
(g) Rest all other items, fittings and fixtures shall be as per shown on drawing. | 85 | Each | - | - |
| - | TABLE 6'X 3' (FD-300)
Overall size shall be 1800mm long, 900mm wide and 760 mm high. All wood shall be of first class hard wood Teak (MP/CP). Legs shall be four in numbers. Legs hsall be 110mmx110mm in section and 741mm high. Legs shall be joined together at the top of legs by 25mmx100mm in section top rail provided in long and hosrt sides. 5mmx5mm in section verticaal grooved shall be provided in the middle in the visible two sides of all legs when placed position. Eight numbers of 25mmx3mm flat iron 200mm ongs bent to right angle shape corners hsall be provided at all the junction of top rails meeting wise leg. Wooden corners shall be providedin side of four ocrners as directed by E ngineer-in-Charge, irrespective of whether shown on drawing or not. Pre-laminated particle board, 19mm thick with teak veneer shaded at top and plag white on other side shall be provided as top of the table. 25mm x 40 mm teak wood edging shall be provided all round the top edges of the table. All wood surfaces exposed to view when placed in position shall be Melamyne police wth glossy finish as directed by the Engineer-in-Charge. | 9 | Each | - | - |
| - | SCH 'A' PART-II (STEEL FURNITURE) | - | - | - | - |
| - | ALMIRAH LARGE STEEL WITH SHELF (FD-1031)
(a) DIMENSION: Overall size shall be all as shown on the drawing. (b) DESCRIPTION: The top sides, back, bottom, and front shall be of 1mm thick mild steel sheet. Base shall be made of 02 Nos mild steel sheet channels back welded to the bottom of the almirah. 04 shelves equally spaced making 05 compartments shall be provided with a concealed locking system without handles as approved by GE. The legs of the almirah should be covered with 1 mm mild steel. (c) FINISH: All steel surfaces shall be pretreated with epoxy powder coating by 07 tank process and oven-dried with the following specifications: (i) Dry film thickness of more than 45 microns. (ii) Salt spray test to withstand more than 1000 hrs. (iii) Adhesion as per DN 53152 standards. (iv) Pencil scratch hardness more than 2H. (v) The color shade of the outer steel body should be in the dual shade. (Shades as decided by GE). (d) NOTE: Test certificates of powder coating are to be submitted. (e) Rest all as shown on the drawing. | 4 | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
TENDER.pdf
Tender Documents • 0.56 MB
BOQ_852291.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .