Minor repair and periodical services of Kothi No. 1 Canal Colony Ambala

Amount

Scraping of white wash and colour wash

Scrapping of cement plaster

12 mm thick cement plaster 1:3

Dismantling of Reinforced cement concrete with cleaning and straightening and cutting of bars if required.

Earth work excavation in ordinary soil exclusive of compensation of earth dressed with a combined lead 495 metres including breaking of clods

Cement concrete 1:3:6 with stone aggregate 20 mm nominal size

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc

Providing & fixing vitriffied tiles size 600x600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: Tile shall be of premium quality (first quality) of reputed manufactures like: NITCO, KAJARIA, SOMANI, ORIENT, BELL JOHNSONS & RAK AND SIMPOLO.

Providing & fixing Vitrified tiles 600x600mm of approved make in skirting/dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS & RAK AND SIMPOLO

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing

Removing R.C.C.Battens from roof

Removing doors and windows (wooden and steel) together with the dismantling of walls Window

Removing doors and windows (wooden and steel) together with the dismantling of walls Door

First class brickwork laid in cement sand mortar 1:3 in first storey upto 4 meters above plinth level.

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: c) Door and window frame size 127mmx50mm with 40mm wide double rebate.

Factory manufactured solid flush door shutters, with block board core as per I.S.No.1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot- pressesd,conforming to I.S.2202 part I and II, fixed in position,including iron hinges,screws, chocks/cleats and stops etc.(excluding the cost of any fittings other than specified above,but including labour for fixing the same in position)- iii ]35 mm thick.

Wire gauze kail wood door and window shutters, without springs, housed in chowkats including chocks, iron hinges, screws, etc., complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same. (b) ]30mm thick

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position

Cement conc. 1:1 ½ :3 with stone aggregate 20mm nominal size for reinforcement concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all repect

Providing and laying average 6mm thick pop coating on walls, celling, beams and linlels etc. complete in all respect

Cost of aluminium fittings complete for doors and windows, such as tower bolts,handles,etc., and screws for these fittings (excluding sliding bolt) a) for Single leaf Shutter.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade

Applying priming coat on steel work consisting of genuine red lead mixed with linseed oil and turpentine oil in equal proportions

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- (Make:- Hindustan, Cera, Hindware, Kajaira, Johnson & Johnson) (i) Vitreous chinaware symphonic suite with 15 litres capacity matching chinaware cistern and all internal brass fitting complete with ‘P’ or ‘S’ trap with or without vent (as approved by the Engineer-in-charge) (ii) Once piece seat and lid in hollow black or white plastic fitted with chromium plated hings and rubber buffers, (to the approved of the Chief-in-charge) Complete in all respects including cutting and marking good walls and floors. (a)Single trap syphonic W.C. Suite (i) White

Preparation of plastered surfaces for distempering including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. Ist Quality

Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre-board etc. Ist Quality

Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls. 1st Quality

Supply & Erection of PVC Conduct Pipe ISI marked (medium) recessed in wall/ceiling etc. including cost of PVC Bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work.

Wiring only in 1.5 sqmm Pvc insulted copper cable in existing conduit pipe and MS boxes covered with 5 mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan point (c) Medium

Light Point Short

Light Point Medium

Light Point Long

3 Pin 5 amp plug point Short

3 Pin 5 amp plug point Medium

3 Pin 15 amp plug point with 4sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Short

3 Pin 15 amp plug point with 4sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Medium

3 Pin 15 amp plug point with 4sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Long

Supplying and laying of electrical items i. Wire 1.5 mm bundle

MCB box 4 way

Holder

Round Sheet

Switch 6 amp

Switch 16 amp

Mcb 32 amp.

Dabbi

LED Panel havells 10watt

LED Panel havells 15watt

Flexible pipe ½” (bundle)

Supply & laying of sanitary item CPVC Pipe ¾” SUPREME

CPVC Elbow ¾”

CPVC Tee ¾”

Dhaga

CPVC Brass elbow ¾” x ¾ “

CPVC FTA. ¾ “ x3/4 “

Solvent Solution CPVC 100 ml

Brass elbow ½” x3/4”

Safeda 10 gm

MTA “ ¾” x1/2” Brass CPVC

Hooks

PVC Pipe 2”

CPVC elbow 2”

CPVC socket 2”

PVC pipe 4” ( 6 kg supreme)

100 ml solvent solution PVC

PVC elbow 4”

Angle Valve

Concealed Shower

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION.

Providing & fixing in postion 15 m i/d C.P Brass bib cock of best quality ( a) Bib cock long body

Providing & fixing in postion 15 m i/d C.P Brass bib cock of best quality ( a) Bib cock

Steel reinforcement TMT Bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc and placing in position complete in all respects for all heights/depths/storeys/basements etc.

Finishing walls with exterior decorative cement based paints, such as snowcem Robbiacem etc on old work, one coat to give an even shade.

Providing & fixing of almirah framing with handle lock all fitting in all complete respect

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick without concrete base

Providing & fixing ceramic tiles/any skid title of size 400x400 mm of approved make in flooring laid in any pattern aspecified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tile Note: Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL JOHNSONS & RAK AND SIMPOLO

Providing and fixing Ist quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Make NITCO, KAJARIA, SOMANI, ORIENT, BELL JOHNSONS & RAK AND SIMPOLO (b) size of ceramic glazed tiles 300x450mm

Providing & fixing mineral fibre false ceiling tiles at all height of size 595x595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance. (RH) of 99% , Light Reflectance 285%, Thermal Conductivity K=0.052-0.057 w/m K, Fire Performance as per BS 476 pt -6&7 ) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @ 120gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanized @ 80gsm( 50mmlong 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40mm thick sheet , to be fixed to the wall with help of plastic raw plug at 450 mm center to center & 40mm long dry wall S.S screws. The exposed bottom portion of all T- section used in false ceiling support system shall be pre-pained with polyester baked paint, for all heights. The work shall be carried out as per specification, drawings and as per direction of the Engineer-In- Charge. With or without groves.

Painting two coats with ready mixed paint in all shades on old wood work to give an even shade including rubbing down old paint

Providing & fixing of Wall Paneling with all fitting complete in all respect

Credit of old door & window

Credit of old Tile

Credit of old tap

Credit of old PVC Sheet

THE NEW TAJEWALA CO-OP L/C SOCIETY LTD