Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.3 L+₹64,065 (2.16%)Rejected-Finance VILL BHELOWATER PO BORJULI PS RANGAPARA DIST SONITPUR ASSAM 784504 | SONITPUR | ASSAM | 784504 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹32.4 L+₹2.8 L (9.43%)Rejected-Finance VILL LAKHOPARA PO GARUBANDHA DISTT SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹35.2 L+₹5.6 L (19.0%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹35.5 L+₹5.9 L (19.9%)Rejected-Finance BISHNU RAVA PATH PO PS TEZPUR DIST SONITPUR ASSAM | TEZPUR | SONITPUR | ASSAM | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | Maa Mira Enterprise L7 | MS Awash Ghosh and Brothers L9 | M/S Mahabir Traders L6 | M/S B.B. Singh Contractor L5 | Saraswati Auto Works L4 | M/S Yadav Corporation L1 | S M STORE L8 | BEE KAAY TRADERS L3 | S H ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for taking out/laying of CI/DI/GI pipelines etc, forming bottom of trenches to the required level and gradient and getting out in soft/loose soil complete all as specified and as directed. | 498 | Cum | 345 ₹1,71,810 | 330 ₹1,64,340 | 350 ₹1,74,300 | 300 ₹1,49,400 | 302 ₹1,50,396 | 200 ₹99,600 | 350 ₹1,74,300 | 350 ₹1,74,300 | 120 ₹59,760 Lowest |
| 2.00 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed. | 491 | Cum | 155 ₹76,105 | 158 ₹77,578 | 180 ₹88,380 | 160 ₹78,560 | 156 ₹76,596 | 150 ₹73,650 | 170 ₹83,470 | 240 ₹1,17,840 | 50 ₹24,550 Lowest |
| 3.00 | Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed. | 7 | Cum | 285 ₹1,995 | 295 ₹2,065 | 290 ₹2,030 | 130 ₹910 | 285 ₹1,995 | 50 ₹350 Lowest | 300 ₹2,100 | 120 ₹840 | 75 ₹525 |
| 4.00 | Taking up or down GI steel tubing of 20mm bore including connections from trenches/walls/floors etc complete all as specified and as directed. | 350 | RM | 19 ₹6,650 | 22 ₹7,700 | 18 ₹6,300 | 15 ₹5,250 | 19 ₹6,650 | 2 ₹700 Lowest | 25 ₹8,750 | 20 ₹7,000 | 15 ₹5,250 |
| 5.00 | Taking up or down GI steel tubing of 25/32mm bore including connections from trenches/walls/floors etc complete all as specified and as directed. | 1,130 | RM | 27 ₹30,510 | 26 ₹29,380 | 30 ₹33,900 | 20 ₹22,600 | 27 ₹30,510 | 5 ₹5,650 Lowest | 30 ₹33,900 | 20 ₹22,600 | 20 ₹22,600 |
| 6.00 | Taking up or down GI steel tubing of 40mm bore including connections from trenches/walls/floors etc complete all as specified and as directed. | 780 | RM | 40 ₹31,200 | 39 ₹30,420 | 38 ₹29,640 | 30 ₹23,400 | 35 ₹27,300 | 30 ₹23,400 | 40 ₹31,200 | 80 ₹62,400 | 25 ₹19,500 Lowest |
| 7.00 | Taking up or down GI steel tubing of 50mm bore including connections from trenches/walls/floors etc complete all as specified and as directed. | 730 | RM | 38 ₹27,740 | 42 ₹30,660 | 41 ₹29,930 | 40 ₹29,200 | 40 ₹29,200 | 45 ₹32,850 | 40 ₹29,200 | 80 ₹58,400 | 30 ₹21,900 Lowest |
| 8.00 | Taking up or down GI steel tubing of 80mm bore including connections from trenches/walls/floors etc complete all as specified and as directed. | 520 | RM | 45 ₹23,400 | 41 ₹21,320 | 46 ₹23,920 | 50 ₹26,000 | 40 ₹20,800 | 50 ₹26,000 | 40 ₹20,800 | 80 ₹41,600 | 35 ₹18,200 Lowest |
| 9.00 | M&L 90mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. | 350 | RM | 1,800 ₹6,30,000 | 1,799 ₹6,29,650 | 1,800 ₹6,30,000 | 1,360 ₹4,76,000 | 1,750 ₹6,12,500 | 1,000 ₹3,50,000 Lowest | 1,790 ₹6,26,500 | 1,350 ₹4,72,500 | 1,050 ₹3,67,500 |
| 10.00 | M&L 63mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. | 470 | RM | 845 ₹3,97,150 | 829 ₹3,89,630 | 845 ₹3,97,150 | 700 ₹3,29,000 | 835 ₹3,92,450 | 540 ₹2,53,800 Lowest | 900 ₹4,23,000 | 760 ₹3,57,200 | 600 ₹2,82,000 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
10 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISSAMARI
PO-Missamari Dist-Sonitpur Assam
REPAIRS TO EXTERNAL WATER SUPPLY DISTRIBUTION NETWORK AND MISC WORKS UNDER GE MISSAMARI
2025_MES_726765_1
8564/E8
Open Tender
Civil Works - Water Works
Item Rate
270 days
GE MISSAMARI
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE MISSAMARI
₹80,000
Yes
28 Nov 2025
20 Aug 2025
12 Sept 2025
20 Aug 2025
10 Sept 2025
3 Sept 2025
20 Aug 2025 - 27 Aug 2025
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for taking out/laying of CI/DI/GI pipelines etc, forming bottom of trenches to the required level and gradient and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.
Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.
Taking up or down GI steel tubing of 20mm bore including connections from trenches/walls/floors etc complete all as specified and as directed.
Taking up or down GI steel tubing of 25/32mm bore including connections from trenches/walls/floors etc complete all as specified and as directed.
Taking up or down GI steel tubing of 40mm bore including connections from trenches/walls/floors etc complete all as specified and as directed.
Taking up or down GI steel tubing of 50mm bore including connections from trenches/walls/floors etc complete all as specified and as directed.
Taking up or down GI steel tubing of 80mm bore including connections from trenches/walls/floors etc complete all as specified and as directed.
M&L 90mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
M&L 63mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
M&L 50mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
M&L 40mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
M&L 32mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
M&L 25mm outer dia,3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.
Fixing only 20mm bore GI tubing with new fittings fixed to walls and ceilings or laying in floors and making good to walls including necessary cleaning of pipe complete all as specified and as directed. Note:- Serviceable Socket obtained from Item No 4 here-in-before
Fixing only 25mm bore GI tubing with new fittings laid in new or old position including necessary cleaning of pipe complete all as specified and as directed. Note:- Serviceable Socket obtained from Item No 5 here-in-before
Laying only 40mm bore GI tubing with new fittings fixed to to walls and ceilings or laying in floors and making good to walls complete all as specified and as directed. Note:- (i)Serviceable Pipe obtained from Item No 6 here-in-before (ii) GI Flanged sockets, rubber board gasket, nuts bolts where ever required shall be measured and paid seperately under respective item at Supply only rates (iii) Labour cost involved for replacement of Flanged sockets, rubber board gasket, nuts bolts etc shall be included in the UNIT RATE QUOTED
Laying only 50mm bore GI tubing with new fittings fixed to to walls and ceilings or laying in floors and making good to walls complete all as specified and as directed. Note:- (i)Serviceable Pipe obtained from Item No 7 here-in-before (ii) GI Flanged sockets, rubber board gasket, nuts bolts where ever required shall be measured and paid seperately under respective item at Supply only rates (iii) Labour cost involved for replacement of Flanged sockets, rubber board gasket, nuts bolts etc shall be included in the UNIT RATE QUOTED
Laying only 80mm bore GI tubing with new fittings fixed to to walls and ceilings or laying in floors and making good to walls complete all as specified and as directed. Note:- (i)Serviceable Pipe obtained from Item No 8 here-in-before (ii) GI Flanged sockets, rubber board gasket, nuts bolts where ever required shall be measured and paid seperately under respective item at Supply only rates (iii) Labour cost involved for replacement of Flanged sockets, rubber board gasket, nuts bolts etc shall be included in the UNIT RATE QUOTED
Supply only GI Flange 80mm bore complete all as specified and as directed. Note:- Mild steel nuts biolts, washers, rubber gasket etc as required shall be deemed to included in the UNIT RATE QUOTED
Supply only GI Flange 50mm bore complete all as specified and as directed. Note:- Mild steel nuts biolts, washers, rubber gasket etc as required shall be deemed to included in the UNIT RATE QUOTED
Supply only GI Flange 40mm bore complete all as specified and as directed. Note:- Mild steel nuts biolts, washers, rubber gasket etc as required shall be deemed to included in the UNIT RATE QUOTED
Supply, laying and testing GI pipe, Medium Grade, 50 mm bore with all fittings; laid in trenches,complete all as specified and as directed.
Supply, laying and testing GI pipe, Medium Grade, 40 mm bore with all fittings; laid in trenches,complete all as specified and as directed.
Supply, laying and testing GI pipe, Medium Grade, 80 mm bore with all fittings; laid in trenches,complete all as specified and as directed.
Supply, laying and testing GI pipe, Medium Grade, 25 mm bore with all fittings; laid in trenches,complete all as specified and as directed.
Supply, laying and testing GI pipe, Medium Grade, 20 mm bore with all fittings; laid in trenches,complete all as specified and as directed.
S&F in repair, 90mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
S&F in repair, 63mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
S&F in repair, 50mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
S&F in repair, 40mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
S&F in repair, 32mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
S&F in repair, 25mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
Making connection of PP-R distribution branch with PP-R main of size 16mm to 40mm outer dia by providing and fixing tee including cutting and making fusion joint etc., complete all as specified and as directed
Making connection of PP-R distribution branch with PP-R main of size 50mm to 90mm outer dia by providing and fixing tee including cutting and making fusion joint etc., complete all as specified and as directed
S&F in repair, PP-R tank nipple 25mm outer dia with washer including cutting and making fusion joint for fixing float valve of service water tank complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 25mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 32mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 40mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 50mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 63mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, PP-R tank male socket (brass insert) 90mm outer dia and making connection to existing distribution branch PP-R pipe including cutting and making fusion joint complete all as directed.
S&F in repair, 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 32mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair, 50mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L Cast Iron Sluice Valve 80 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.
M&L Cast Iron Sluice Valve 100 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.
M&L Cast Iron Sluice Valve 150 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.
Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 150 mm bore (dia) for passing of pipes, complete all as specified and as directed. Note:- Pipe will be measured and paid seperately under appropiate item
Supply of JCB/Fork land for removal of Silt/Gravels in the open drain from Ghabharu River to sand catcher at old Jalkendra and new Jalkendra all as directed by EIC Note:- (a) Rate quoted is deemed to inclusive of payment of Driver, Feul, Coolent, Lubricant etc or any other acessories as required (b) No additional charges will be paid for the T&P required. (c) Work shall be carried out only in written orders of Engg-In-Charge, and duty roster mentioning the Vechile Registration No. shall be maintained for start time and end time, date wise signed by JE, Engg-In-Charge,Contractor dully countersigned by GE. Photographic evidence shall be submitted to Engg-In-Charge as demanded and cost of Photos (One Photo per hour) is deemed to be inclusive in the unit rate quoted.
S H ENTERPRISES (BID ID -3421616)
BEE KAAY TRADERS (BID ID -3421092)
Saraswati Auto Works (BID ID -3421175)
M/S B.B. Singh Contractor (BID ID -3420932)
M/S Mahabir Traders (BID ID -3420919)
Maa Mira Enterprise (BID ID -3420855)
S M STORE (BID ID -3421824)
MS Awash Ghosh and Brothers (BID ID -3420913)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .