CAMOUFLAGE PATTERN PAINTING TO BOUNDARY WALL AND BUILDINGS IN TECH AREA AND MISC WORK AT AF STATION JAMNAGAR

Amount

Note:- (i) Contractors' attention is invited to the point that entire requisite quantity of Exterior Emulsion paint, primer, OBD and wall care putty as catered in this BOQ shall be brought by the contractor in one go after approval of sample, in sealed manufacturer packing within 15 Days of date of commencement stipulated in work order No 1 and handed over to Engineer-in-Charge.

(ii) Engineer - in - Charge will keep the material after marking on its container, in safe custody and same will be issued to contractor as per site requirement. Entire quantity of Acrylic Emulsion paint, synthetic enamel paint, epoxy paint, plastic emulsion paint, primer, OBD and wall care putty etc will be recorded in MB as NOT TO BE ABSTRACTED. Quantity of above said material shall be calculated based on manufacturer's instruction and contractor shall submit necessary documentary evidence to Engineer-In-Charge in support of consumption of material as per manufacturer instruction

The work is to be executed for buildings upto 12M height above ground level.

M&L for preparing old decorated wall surfaces plastered or unplastered and applying a coat of white wash (Note : Praparation of surfaces shall include brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.)

As per per items No. 1 above but on ceiling

M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper all as specified and directed.

M & L for complete removal of existing treatment on old surface of walls and applying two coats of distemper oil emulsion over & including a coat of alkali resistant priming paint over and including cement based wall care putty on plastered wall surfaces complete all as specified and directed.

All as per item No 4 above but on ceiling

M & L for complete removal of existing treatment on old surface of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489 : 2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Liters/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm. (Note : The Point is to be applied in camouflage pattern).

M & L for preparing old decorated wall surfaces, plastered or unplastered and applying one coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives all as per manufacturer's instructions, as specified and as directed. (Note : The Paint is to be applied in camouflage pattern).

M & L for complete removal of existing treatment on old surface of walls and applying 1mm thick, layer of cement based wall care putty and applying two coats of plastic emulsion paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion (Company Depot Tinted) over a coat of alkali resistant priming paint over and including cement based wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall incl pilasters / cornices etc and applying two coats of distemper oil emulsion (company Depot Tinted) over a coat of alkali resistant priming paint over and including cement based wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall incl pilasters / cornices etc and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489 : 2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Liters/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm. (Note : The Point is to be applied in camouflage pattern).

M&L for prepration of old painted steel surfaces of any description, over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for complete removal of existing treatment from old surface of steel of any description over 10cm width / girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old treated/decorated wall/painted surface of stones, concrete, asbestos cement or plastered of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying one coat of epoxy paint.

M & L for re-writing letters or figures (Block, Roman, Italic or Indian) n.exc. 30 cm height. (Note : Paint shall be synthetic enamel paint. Painting should not show signs of brush marks).

M&L for repairing the edge/corner of Chajja/roof projection and similar work by removing plaster, width/girth not exc 150mm and making good with 10mm thick rendering in CM 1:3 to match with existing surface complete all as specified and directed

Taking down cement or cement lime mortar on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. (Note : The rates includes for removal of rubbish off the premises)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in Cement Plaster 1:6, finished even and smooth without using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in Cement Plaster 1:4, finished even and smooth without using extra cement.

M&L for rendering 05 mm thick on fair faces of brick work or concrete surfaces of ceiling in Cement Plaster 1:3, finished even and smooth without using extra cement.

M/S Rajendra Constructions

Pooja Enterprise

KEVAL ENTERPRISE

Sukhi Electricals