Repairs to Various Blocks (6-Unit) at class 1/2 Colony Valsad Ta. Valsad Dist. Valsad (Repairing Main Door Wooden Window shutter Colour External Plaster Toilet-Bathroom Accessories refixing External Pipe Line Replacing & Plumbing Work)

Name of work :-

Repairs to Various Blocks (6-Unit) at class 1/2 Colony Valsad Ta. Valsad Dist. Valsad (Repairing Main Door,

Wooden Window shutter, Colour, External Plaster, Toilet-Bathroom Accessories refixing, External Pipe Line

Replacing & Plumbing Work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

No. according to

Item of work Quantity Unit In figure

1 Dismentaling Tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all lead 142 Sqmt 48.21

2 Dismantling santtary fittings like wash basin . W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with all 12 Nos. 405.65

3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings

and clamps including stacking the materials with all lead and lift ( for any 440 Rmt. 75.08

4 Demolition and disposal of unserviceable materials with all lead and lift.(i)

5 Removing and scraping of old deteriorated plaster of any thickness fromm

wall / R.C.C member including stacking of serviceable material and 941 Sqmt 19.57

disposal of unserviceable from site of work with all lead and lift

6 Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

7 Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

@ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

8 Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

9 Providing and laying water proofing treatment by conventional method

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

10 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in colour cement slurry

etc. complete. Colour and Shade approved by Engineer-In-Charge

11 Providing and laying coloured glazed tiles of the size 300 mm x 600 mm x

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

12 Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with 33.1 Sqmt 1089.67

pigment to match the shade of slab including rubbing and polishing etc.

13 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

14 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

15 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

16 Providing, laying and jointing in true line and level 75 mm dia. UPVC

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall 30 Rmt. 698.92

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

17 Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

18 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

19 Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

20 Providing and fixing brass screw down stop tap.(A) 15mm dia. 36 Nos. 205.83

21 Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

22 Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

23 Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be 6 Nos. 1303.71

measured and paid for separately) (A) vitreous China Pattern :(i) in white

24 Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

25 Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

26 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

27 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.

28 Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on 3000 Litre 3.95

29 Providing erecting and fixing double coated ISI water tank Man Hole

Cover of installed water tank of any capacity with all necessary fittings 6 Nos. 434.30

and connection etc. complete on terrace

30 Providing and fixing ball cock of approved. quality as directed.(A) Copper

Metal (ii) 50mm dia.

31 Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P or R type.

32 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2-coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

33 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter with wood grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking 21 Sqmt 2019.98

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are to

be inclusive of S.S hinges with fastener sleeve & alluminium fixtures &

34 Providing and fixing 30mm thick factory made moulded door shutter

wood free consisting of frame made out of M.S. tubes of 19 gauge

thickness and size of 25mm x 25mm for stiles, top and bottom rails, M.S.

frame shall have a coat of steel primers. The inner panel shall consist of

25mm thick High Density EPS conforming to IS 4671-1984 bonded with

2mm thick termite proof, water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in different plain and /or prelim

colours after routing the moulded design on one side and 2mm plain

and/or prelim PVC sheet on other side of the EPS. The edges of panel to

be sealed with lipping of 10mm wide PVC sheet batton (made by sticking

2 PVC rigid foam sheets of 5mm thickness using PVC solvent cement) and

stiles 25mm (5mm x 5) thick and 30mm width PVC sheet fitted along M.S.

tube for lock provision and for lock height 5mm thick PVC sheet of size

150mm x 100mm fixed with upper and lower face of inner side of EPS

panel etc. complete as per direction of Engineer in charge manufacture’s

specification and drawing.

35 Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with 13 Sqmt 1797.77

necessary screws. (B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

36 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

37 Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Ground floor

38 Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For First Floor

39 Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Second Floor

40 Providing 10 mm. Thick cement plaster in single coat for plastering on

ceiling and soffits of stairs and finished even and smooth in : (I) Cement 52 Sqmt 140.95

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

41 Providing 10 mm. Thick cement plaster in single coat for plastering on

ceiling and soffits of stairs and finished even and smooth in : (I) Cement 52 Sqmt 164.34

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For First Floor

42 Providing 10 mm. Thick cement plaster in single coat for plastering on

ceiling and soffits of stairs and finished even and smooth in : (I) Cement 52 Sqmt 187.73

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Second Floor

43 20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

44 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

45 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

46 Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

47 Repairing of Concrete Slab as per Following Methods. 1. Using of Chipping

Gun to get rid of all Loose Concrete. 2. Use Brush and Vaccume to clean

dust and other loose Particles. 3. Using a Brush, apply Rust converter to

all rusted reinforcement. 4. Using a Brush apply First coat of epoxy Primer

on all exposed bars. 5. Using a Brush apply confix HV on all the surface 11.7 Sqmt 7004.35

that will be patched. 6. Using Towel Apply concrete patch Sikadur 43HE(h)

while conflix HV is still wet. all the above step done in precense of

Engineer-in-charge with including support to existing slab if required. etc.

48 Providing average 20 mm thick single coat polymer plaster by removing

detoriated plaster over RCC member, like column, beam, slab etc.

exposing existing reinforcement including scraping by wire brush,

applying rust removing chemical, rust convertor and zinc rich primer on

existing reinforcement, applying polymer bonding agent on existing 99.9 Sqmt 394.91

concrete surface including plastering in CM 1: 3 in single coat including

standard quality (Dr, fixit or any equivalent brand) curing compound

agent and finishing with floating coat of neat cement slurry adding Polyalk

Fix Prime polymer chemical as per directed by Engineer - in - charge for all

49 Dismentling steel work including distempering and stacking the materials

with all lead and lift.

50 Removing, Repairing and Refixing Old existing wooden door shutter

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like 3 50.4 Sqmt 1758.41

Hinges, 1 Stoppers 20cm, 1 Aldrop 25cm, 2 Handle 10cm, 1 Tadi 20cm etc.

and as directed by engineer in charge etc complete

51 Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and arragements for inside 9 Sqmt 4495.02

and outside locking with push-pull operation including the cost of hood

cover and spring etc. complete. (B) Shutters having width 3.5 M. and

52 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38kg. (Wt. of cover 23 kg. and wt of frame 15kg.) R.C.C top slab with 1:2:4

mix (1-cement:2-coarse sand:4-graded stone aggregae 20mm size

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

53 Providing and fixing polished 18 mm thick black granite with full round

edge and double side polished of approved quality in between urinal and

fixing with cement slurry & adhesive including moulding of both exposed

edges as directed by engineering in charge etc. complete.

54 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand). Extra for brick work in

superstructure above plinth level upto floor two level(C) Fly Ash Bricks

55 Providinfg and fixing Safty grills of required pattern for windows/ Door

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc. including 1023.2 Kg. 109.08

one coat of primer of approved quality and two coats of oil painting as

per detail drawing etc complete.

Rupees Twenty Lakh Twenty Eight Thousand Three Hundred Seventy Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 2028370.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction

works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005

notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division