Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.5 LAccepted-AOC BLOCK B WARD NO 34 SURYASEN COLONY HARI MANDIR ROAD PO SILIGURI TOWN PS NEW JALPAIGURI DIST JALPAIGURI W B PIN 734004 | DARJEELING | WEST BENGAL | 734004 | L-1 | Accepted-AOC Being L1 bidder | |
| 2 | L-2₹29.3 L+₹46,193.38 (1.60%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹29.8 L+₹91,899.50 (3.18%)Rejected-Finance GAIRKATA ROAD WARD NO 03 PO PS DHUPGURI DIST JALPAIGURI W B PIN 735210 | JALPAIGURI | WEST BENGAL | 735210 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹31.0 L+₹2.1 L (7.23%)Rejected-Finance KHUDIRAMPALLY P O BANARHAT DISTT JALPAIGURI W B PIN 735202 | JALPAIGURI | WEST BENGAL | 735202 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹31.2 L+₹2.4 L (8.19%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹39.7 L
EMD Value
₹79,400
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NORTH) BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
SPL REPAIRS TO OVERHEAD TANK, BATH, TOILET AND COOK HOUSE OF CERTAIN OTM ACCN OF MTN BDE AND ITS UNITS, ADDN/ALTN OF 02 BATH AT OTM-04 (N/B) DM-3 AND DM-04 OF JAT AND PROVN OF TRG SHED IN EXISTING SMALL ARMS SHORT RNG DOGRA UNDER GE (NORTH) BINNAGURI
2023_MES_630311_1
NIT No. 8701 / 39 / 2023-24 / 12 / E8
Open Tender
Civil Works
Item Rate
150 days
BINNAGURI CANTONEMNT
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (NORTH) BINNAGURI
₹79,400
Yes
2 Feb 2024
29 Nov 2023
6 Jan 2024
29 Nov 2023
4 Jan 2024
21 Dec 2023
Amount
Taking down chowkats or frame exc. 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the frame including Builders Hardware complete all as specified and as directed.
Taking down chowkats or frame n.exc 1.5 Sqm each without taking off shutters from the frame including Builders Hardware complete all as specified and as directed.
S&F factory made pressed steel frames confirming to relevant IS, having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.
S&F 30mm thick hard wood factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and as directed.
S&F stainless steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.
S&F aluminium handles cast type anodised 150mm of size complete all as specified and as directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drawing No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh, MS guard bar/grill and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of schedule.
All as per Item No 11 here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat anti-corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh, MS guard bar/ grill and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of schedule.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed.
S&F figured glass, pin head type 3mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for PCC type C-1, 1:3:6 using 20mm graded stone aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.
Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm + 10mm) mixed with water proofing compound in top layer 200 ml per bag of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
M&L for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) and finished even and fair complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) and finished even and fair complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for preparation of newly wall plastered surfaces and applying three coats of colour wash on wall complete all as specified and as directed.
M&L for preparation new wall plastered surfaces and applying with one coat wall putty and two coats of distemper acrylic emulsion over one coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on wall complete all as specified and as directed.
M&L for preparation of old surface of walls by brooming down or steel wire brushing; scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old ceiling surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for complete removal of existing treatment of internal wall surfaces and applying two coats of acrylic emulsion distemper over two coats of wall care putty and over a coat of primer complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster complete all as specified and as directed.
M&L for non skid ceramic digital coloured floor tiles 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointing in white or coloured cement to match as in floor tiles complete all as specified and as directed.
M&L for glazed ceramic digital elevation coloured tiles in vertical surfaces of size 450x350x6-7mm/300x600x6-7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match the surface of tiles complete all as specified and as directed.
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) and rounding the exposed surfaces of granite complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles as backing coat using cement mortar 1:4 complete all as specified and as directed.
Demolition of brick work built in cement mortar of any description complete all as specified and as directed.
M&L for brickwork with fly ash bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.
S&F of tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15mm bore complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.
S&F of tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.
Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.
S&F 1000 ltrs capacity rotational moulded polyethylene water storage(cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part-I complete all as specified and as directed.
S&F ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.
S&F 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15 mm bore fancy type bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed
S&F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repair 15 mm bore fancy type angular stop cock cast copper alloy screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repair of Chromium plated over head shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
S&F wash basins, vitreous china, white flat back of size 550mm x 400 mm x 140 mm or nearest size conforming to model ‘CALBURT’ Cat No.S2020103 of CERA or techno commercially equivalent model in other makes as listed in list of makes and as approved by GE with and including cast form brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
S&F in repair 15mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down, fancy high pressure, with or without lettered ‘HOT' or 'COLD’ with long screwed sunk and fly nuts complete all as specified and as directed.
S&F vitreous china squatting pan "Orissa" pattern of size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding in repairs including demolition of existing one complete all as specified and as directed.
Supply & fixing in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipe complete but including fixing bolts, PVC seat cover with aluminium/PVC hinging devices & etc complete all as specified and as directed.
S&F in repair 10 ltr capacity low level symphonic type white plastic twin flushing cistern conforming to model ‘COMPASS’ Cat No B1020106 of CERA or techno commercially equivalent model in other makes as listed in list of makes and as approved by GE as per IS 7231:1994 with inlet, ball valve , float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.
S&F in repair Vitreous China Urinal, Half stall type, white (including all fittings and fixture i.e. CP waste coupling, CP urinal spreader, PVC waste pipe etc) complete all as specified and as directed.
S&F brass chromium plated tubular towel rail 20mm dia of D type 60 cm long between flange complete all as specified and as directed.
S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F PVC (SWR) multi floor trap 75 mm/100 mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F stainless steel Soap dish of approximate size 125 mm complete all as specified and as directed.
M&L for salt-glazed stoneware gully traps, square or round mouthed, type 'P' of size 150x100mm complete all as specified and as directed.
Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified and as directed.
S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed.
S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed.
S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed
S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.
S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for as in floors, surface channel etc complete all as specified and as directed.
M&L for water proofing treatment to sunken floor with the following course of treatment/ specification:- (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer's instruction, laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe manufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron) measured dry on dry surface over a coat of PU primer including preparation. (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalent approved brand by GE. Make of PU paint - Dek guard Pour equivalent approved brand by GE. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout, to be provided through external wall to drain out accumulated water.(vii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M-7.5. (Note : Only floor area should be measured for payment.)
M&L for RCC type B1 (1:2:4) using 20 mm graded stone aggregate in fins, fascias, louvers, parapets, and railings, newels, balustrade & the like complete all as specified and as directed. Note: Reinforcement shall be measured and paid separatly under relevant item of this schedule.
Formwork to fins, louvers, fascia etc for fair finished surfaces of concrete flat complete all as specified and as directed.
S&F mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for as in floors, surface channel etc complete all as specified and as directed.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n.exc.100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .
M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bituminous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (Note: Bituminous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" by M/s Texsa India Ltd. or equivalent as approved by GE) (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.5 Kgs per Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Notes:- (i) Laying APP based polymeric membrane shall be done torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of Aluminium paint over APP membrane. (iv) Cutting groove in brick wall 75 mm wide and 65 mm deep and shopping horizontal face of groove with cement mortar 1:3
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and including use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified and as directed.
M&L for PCC 1:2:4 type B-I (using 20 mm graded stone aggregate) as in coping /benching to sides of foot path finished fair and even etc complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.
M&L for fine aggregate (sand) spreading and leveling in layer n exc 50mm thick under paver block for cushioning complete all as specified and as directed.
M&L for 60mm thick rubber moulded precast concrete interlocking colour paver block of any shape and size confirming to IS 15658-2006 of M-35 Grade complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.
S&F steel work in tubular trusses as in post, roof trusses, purlins rafters including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 etc complete all as specified and as directed.
S&F mild steel plates of grade Fe-410 (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without an attachment complete all as specified and as directed.
M&L for Mild steel screw bolts 5-10 mm dia & length exc. 5 cm but n. exc 10cm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.
S&F mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
INTERNAL ELECTRIFICATION Taking down carefully old/unserviceable copper/aluminum any type of point wiring for one light, socket, fan, bell or power etc including all fittings such as switches sockets, holders, light fittings, fan regulators, call bell etc and making good the disturbed surface of wall ceiling complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed FRLS cable, single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC medium grade casing capping (Double lock pattern) and accessories (ISI Marked) on walls/other surface etc including provision of 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable FRLS as earth continuity conductor (green in colour) & PVC switch box heavy duty of appropriate size on wall/other surface for housing switches/socket outlet, Fan regulators etc complete all as specified and directed for the following :-
One light point controlled by one way switch 5/6 Amps complete all as specified and as directed.
One Ceiling fan/exhaust fan point controlled by one way switch 5/6 Amps complete all as specified and as directed.
One socket out let 5/6 amps point on the same board complete all as specified and as directed.
One socket out let 5/6 amps point on the independent board complete all as specified and as directed.
All as per item No 98 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.
S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.
S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.
S&F of switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.
S&F switch socket combination 3 and 5 pin 5/6 amps, multi purpose flush non-shutter, non interlocking type white ivory finish, complete all as specified and as directed
S&F socket 2 in 1, 5 pin, 5/6 amps, white ivory finish flush type, complete all as specified and as directed
S&F of ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.
S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.
S&F LED white glass Lamp 1x09 Watt 230V Base-22 complete all as specified and as directed.
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaries efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with all accessories internally prewired and connecting up complete all as specified and as directed.
S&F of metal exhaust fans AC single phase 230 Volt of size 300 mm sweep, 900 rpm, Heavy duty with and including MS louver, Cutting of the wall should not be less than 25mm the sweep diameter complete all as specified and as directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), Single door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete all as specified and as directed.
S&F MCB, Single pole & neutral, 35 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete all as specified and as directed.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in suitable dia PVC rigid non-metallic conduit with and including taking down unserviceable sub main, complete all as specified and as directed. Note : Two runs of sub main wiring cable along with one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.
samrat saw mill and joinery workshop
BIG BEN ENTERPRISES
S. G. CONSTRUCTION
M/s. MD IRSHAD
M/S SINHA ENTERPRISE
S.N. GHOSH AND CO.
L. B. SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .