Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC | L1 | Accepted-AOC Accepted by Panchayath committee | |
| 2 | L2₹5.9 L+₹805.27 (0.14%)Rejected-Finance | L2 | Rejected-Finance Rejected by panchayath committee |
| Sl No | Description | Qty | Unit | HAMZA P.M L1 | AHAMMAD KABEER P H L2 |
|---|---|---|---|---|---|
| 1.00ANGANWADI MAINTENANCE | |||||
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.73 | cum | 8,569.14 ₹6,246.9 Lowest | 8,569.14 ₹6,246.9 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 179.86 | kg | 187.05 ₹33,643.56 Lowest | 187.05 ₹33,643.56 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 899.32 | kg | 194.27 ₹1,74,710.9 Lowest | 194.27 ₹1,74,710.9 Lowest |
| 1.00 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | 198 | kg | 128.24 ₹25,391.52 Lowest | 128.24 ₹25,391.52 Lowest |
| 1.00 | OD405902/2025-2026:
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 89.93 | sqm | 621.1 ₹55,856.77 Lowest | 621.1 ₹55,856.77 Lowest |
| 1.01 | OD405903/2025-2026:Ridge caping with prepainted galvanised steel sheet 5mm thick 60 cm wide including all cost and materials ,conveyance,labour charges etc complete | 8 | sqm | 700.18 ₹5,601.44 Lowest | 700.18 ₹5,601.44 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1 | sqm | 164.86 ₹164.86 Lowest | 164.86 ₹164.86 Lowest |
| 1.01 | 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid | 2 | each | 6,805.27 ₹13,610.54 Lowest | 6,805.27 ₹13,610.54 Lowest |
| 1.01 | 50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | 6 | metre | 584.11 ₹3,504.66 Lowest | 584.11 ₹3,504.66 Lowest |
Tender Value
₹5.9 L
EMD Value
₹14,734
Closing Date
12 Feb 2026, 2:00 pmClosed
AE LID EW
VALLATHOL NAGAR GRAMA PANCHAYATH
Annual Plan VALLATHOL NAGAR GP Pro No 121 26 REPAIR WORK FOR VARIOUS ANGANWADIES General Civil Work
2026_LSGD_832790_2
Etdr/08/2025-2026
Open Tender
Civil Works - Buildings
Item Rate
180 days
VALLATHOL NAGAR GRAMA PANCHAYATH
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,300
₹14,734
14 Jul 2026
4 Feb 2026
13 Feb 2026
4 Feb 2026
12 Feb 2026
4 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1ANGANWADI MAINTENANCE | |||||
| 1.001 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.6 | kg | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.004 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | - | kg | - | - |
| 1.005 | OD405902/2025-2026:
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 0.8 | sqm | - | - |
| 1.006 | OD405903/2025-2026:Ridge caping with prepainted galvanised steel sheet 5mm thick 60 cm wide including all cost and materials ,conveyance,labour charges etc complete | - | sqm | - | - |
| 1.007 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | - | sqm | - | - |
| 1.008 | 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid | - | each | - | - |
| 1.009 | 50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1401222.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
SBDNIT.pdf
Tender Documents • 1.91 MB
FOT.pdf
Tender Documents • 0.25 MB
AFFIDAVIT.pdf
Tender Documents • 0.24 MB
BOQ_1401222.xls
BOQ • 0.32 MB
PREAGREE.pdf
Tender Documents • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .