Creation of 02 No Lecture Halls in the Stilt Floor of College / Lab Block at SKIMS MCH Bemina Srinagar Civil Part Only

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared as per the directions of Engineer-in-charge.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Supplying , Laying and stacking at site of Good Earth incl. spreading in layers, dressing, compacting incl. all leads, lifts, head loads and carriages of all material involved complete.

Providing and Laying stone hand packed on level in foundation trenches and surfaces of ramp incl. hand ramming, copacting, filling of the intersticc. incl. all leads, lifts, head loads and carriages of all material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all leads, lifts, head loads and carriages of all material involved complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. all leads, lifts, head loads and carriages of all material involved complete.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. all leads, lifts, head loads and carriages of all material involved complete.

Centering and shuttering including strutting, propping etc. and removal of form for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incl. all leads, lifts, head loads and carriages of all material involved complete.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Providing and Fixing 25 mm thick rubber wood for Benches, tables (lecture halls seating arrangement) with necessary screws, nuts and bolts/nails, fasteners, steel clips etc whatsoever required at site framed and fixed in position incl. applying primer with necessary paints/varnish for dressing, polishing in order to achieve the smooth and uniform surface, and allied works if any (as per the directions of engineer in-charge)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides.

Providing and Fixing specified glass wool insulation 50mm thick for ceiling, walls, secured to walls / ceiling with galvanized chicken wire mesh incl. cutting and placing to achieve desired acoustic performance (Density 16kg / cum) complete in all respects as per the directions of Engineer-in-charge.

Providing and Fixing coloured hessian cloth fabric on all walls incl. stapling complete in all respects as per the directions of Engineer-in-charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : imported wood.

Providing and Fixing of 12mm thick wooden panelling over specified glass wool, panelling to be fixed over wooden grid (excluding the cost of wooden grid) incl. applying wood filler to achieve smooth surce finished with 2-3 coats of acrylic emulsion. Imported wood complete in all respects as per the directions of Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.

Providing and Fixing hermatically dual sealed insulated glass comprising of 6mm clear toughened glass and 6mm laminated glass frame incl. cost of approved wheathersilicon sealant complete with custom design extruded EPDM gasket extra to present water penetration all complete as per directions of Engineer-in-charge.

Providing and Fixing translucent film on glass incl. allied works, if any. complete in all respects as per the directions of Engineer-in-charge.

Providing and Fixing mild steel butt hinges 75x40 mm incl. cost of nuts screws etc. complete in all respects as per the directions of Engineer-in-charge.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm / 200mm .

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and Fixing M.S Rod locks with in-built sliding bolt incl. nuts, grills etc. complete in all respects as per the directions of Engineer-in-charge.

Providing and Fixing hooks and stoppers of approved brand & manufacture incl. all necessary accessories complete in all respects as per the directions of Engineer-in-charge.

Providing and Fixing Steel sign boards of various size of approved brand / design complete as per the directions of Engineer-in-charge.

Size 500mm x 200mm

Size 900mm x 450mm