Supply, delivery and fixing of Waste Collecting Esclator 1 No at Kotilingala Ghat in RMC (Under Pushkaram Funds)

MANUFACTURE SUPPLY AND DELIERY OF Triple ESCALATOR SERIES XX cleated modular belt body with SS Df size 70 feet length(+/- 10 feet length), 1.0 MTR width and fixed at a height of 2.0 meters, SLOPE 20 DEGREES, ESCALATOR TOP DRIVE SIDE 200MM SQ MS CHANNEL BOX WITH SS CLADING AND SS 304 SHAFT ENDS BEARING BRACKETS WITH HEAVY DUTY BEARINGS of P2B 208-6 SETS as per detailed drawing and all arrangement with folowing components

Mechincal arrangements

AJFABRICATION, SUPPLY AND DELIVERY OF ESCALATOR SCREEN HOIZONTAL, VERTICAL FULL SUPORTS WITH SS 50MMX50MM SQ. (PIPE FOR MODULE BELT SUPPORT TOP AND BOTTOM THROUGH 75MM X 6MM THICK FLAT AND CENTRE SUPPORT 40MM X 6MM THICK FLAT. USE 70MM X 10MM THICK WEAR STRIP PLAIN THROUGH MODULAR BELT FOR SMOOTH RUNNING, FOR SMOOTH RUNNING OF MODULEL BELT USE A SERIES MODULE SPOCKET-18 NOS AND CENTRE 40MM SQ.ROD WITH LOCKING RINGS AND ADJUSTMENT OF MODULE BELT. FOR EVERY 300MM DISTANCE USE SS FLAT WELDING WITH NEEDLES AND FIXING WITH MODULE BELT FOR REMOVING WASTE ON DRAIN. ESCALATOR BODY SIDES, TOP CENTRE, BOTTOM, COVER WITH SS 1.5MM THICK SHEET. AT THE BOTTOM OF ESCALATOR BODY FULL SUPPORTING WITH 40MM X 5MM THICK ANGULARS AND COVER WITH SS SHEET

Litting arrangments

B) MANUFACTURE, SUPPLY AND DELIVERY OF HEAVY DUTY3HP MOTOR WITH ATTACHED GEAR BOX-3NOS WITH SUPPORTS SS 304 SHAFT WITH KEY WAY AND SUPPORTING ANGULARS AND BASE FRAMES.

Electrical arrangments

SUPPLY, AND DELIVERY OF ELECTRICAL PANNEL BOARDS, STARTER, WIRING CONSTRUCTION OF RCC COLUMNS SIZE:-450MMX450MMX1.0MTRX2NOS CONSTRUCTION OF POWER ROOM.

Erection mechanisam for direct loading in to the truck.

FABRICATION, SUPPLY, DELIVERY AND ERECTION OF M.S ESCALATOR SCREEN 1.OMTR WIDTHX 6.0MTR LENGTH FOR UNLOADING OF WASTE MATERIAL TO Garbage vehicle INCLUDING COST OF ALL MATERIAL, WELDING WORK, CUTTING, GRINDING, HIRE CHARGES OF 16 TONS CRANE, ERECTION WORK AND ALL LABOUR CHARGES

ERECTION AND INSTALLATION OF ESCALATOR SCREEN INCLUDING WELDING WORKS, CUTTING, GRINDING, LOADING, UNLOADING, TRANSPORTING, HIRE CHARGES FOR 16 TONS CRANE AND ALL LABOUR CHARGES.

FABRICATION, SUPLY AND DELIVERY AND ERRECTION OF M.S PLAT FORM FOR LIFTING OF ESCALATOR BODY. MATERIAL USE M.S ONLY:- HOIZONTAL 200MM, 150MM, 100MM MS CHANNELS, SUPPORTING ANGULARS AND PLAT FORM MS SHEET CHEQURED PLATE AND 40MM, 25MM MS ROUND PIPE FOR HAND RAILING. MANUFCTURE, SUPPLY, DELIVERY AND FIXING OF HEAY DUTY ELECTRICAL GEAR BOX WITH CHAIN PULLY FOR LIFTING OF ESCALATOR BODY.

Auguring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.( upto 450mm Dia)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering etc., complete as directed by the site engineer. (Pile cap)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering etc., complete as directed by the site engineer. (Coloums)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

MANUFACTURE SUPPLY AND DELIERY OF Triple ESCALATOR SERIES XX cleated modular belt body with SS Df size 70 feet length(+/- 10 feet length), 1.0 MTR width and fixed at a height of 2.0 meters, SLOPE 20 DEGREES, ESCALATOR TOP DRIVE SIDE 200MM SQ MS CHANNEL BOX WITH SS CLADING AND SS 304 SHAFT ENDS BEARING BRACKETS WITH HEAVY DUTY BEARINGS of P2B 208-6 SETS as per detailed drawing and all arrangement with folowing components

Mechincal arrangements

AJFABRICATION, SUPPLY AND DELIVERY OF ESCALATOR SCREEN HOIZONTAL, VERTICAL FULL SUPORTS WITH SS 50MMX50MM SQ. (PIPE FOR MODULE BELT SUPPORT TOP AND BOTTOM THROUGH 75MM X 6MM THICK FLAT AND CENTRE SUPPORT 40MM X 6MM THICK FLAT. USE 70MM X 10MM THICK WEAR STRIP PLAIN THROUGH MODULAR BELT FOR SMOOTH RUNNING, FOR SMOOTH RUNNING OF MODULEL BELT USE A SERIES MODULE SPOCKET-18 NOS AND CENTRE 40MM SQ.ROD WITH LOCKING RINGS AND ADJUSTMENT OF MODULE BELT. FOR EVERY 300MM DISTANCE USE SS FLAT WELDING WITH NEEDLES AND FIXING WITH MODULE BELT FOR REMOVING WASTE ON DRAIN. ESCALATOR BODY SIDES, TOP CENTRE, BOTTOM, COVER WITH SS 1.5MM THICK SHEET. AT THE BOTTOM OF ESCALATOR BODY FULL SUPPORTING WITH 40MM X 5MM THICK ANGULARS AND COVER WITH SS SHEET

Litting arrangments

B) MANUFACTURE, SUPPLY AND DELIVERY OF HEAVY DUTY3HP MOTOR WITH ATTACHED GEAR BOX-3NOS WITH SUPPORTS SS 304 SHAFT WITH KEY WAY AND SUPPORTING ANGULARS AND BASE FRAMES.

Electrical arrangments

SUPPLY, AND DELIVERY OF ELECTRICAL PANNEL BOARDS, STARTER, WIRING CONSTRUCTION OF RCC COLUMNS SIZE:-450MMX450MMX1.0MTRX2NOS CONSTRUCTION OF POWER ROOM.

Erection mechanisam for direct loading in to the truck.

FABRICATION, SUPPLY, DELIVERY AND ERECTION OF M.S ESCALATOR SCREEN 1.OMTR WIDTHX 6.0MTR LENGTH FOR UNLOADING OF WASTE MATERIAL TO Garbage vehicle INCLUDING COST OF ALL MATERIAL, WELDING WORK, CUTTING, GRINDING, HIRE CHARGES OF 16 TONS CRANE, ERECTION WORK AND ALL LABOUR CHARGES

ERECTION AND INSTALLATION OF ESCALATOR SCREEN INCLUDING WELDING WORKS, CUTTING, GRINDING, LOADING, UNLOADING, TRANSPORTING, HIRE CHARGES FOR 16 TONS CRANE AND ALL LABOUR CHARGES.

FABRICATION, SUPLY AND DELIVERY AND ERRECTION OF M.S PLAT FORM FOR LIFTING OF ESCALATOR BODY. MATERIAL USE M.S ONLY:- HOIZONTAL 200MM, 150MM, 100MM MS CHANNELS, SUPPORTING ANGULARS AND PLAT FORM MS SHEET CHEQURED PLATE AND 40MM, 25MM MS ROUND PIPE FOR HAND RAILING. MANUFCTURE, SUPPLY, DELIVERY AND FIXING OF HEAY DUTY ELECTRICAL GEAR BOX WITH CHAIN PULLY FOR LIFTING OF ESCALATOR BODY.

Auguring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.( upto 450mm Dia)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering etc., complete as directed by the site engineer. (Pile cap)

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering etc., complete as directed by the site engineer. (Coloums)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work