WBMAD/ULB/HM/APAS- 11(2025-26)

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground Floor including roof Page No. 10 of 315, Item No. 1a)

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground Floor including roof Page No. 10 Item No. 1a)

Brick work with 1st class bricks in cement mortar (1:6) Add extra for each additional floor over the rate for ground floor on items In Superstructure 1st floor 3rd corrigenda, (P.no-15,T/8)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(Ground floor) (a) Pakur/Chandil variety (P.No.26 T/10(i)), 3rd corrigenda, 5763.72+95.00 = 5858.72 Addextraover the rateof ground floor forbasement andeachadditional floor above ground floor for items 1, 4 to 22 of subhead B (i) upto 4 th floor.(1st floor)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (P-43, T/40), 9 th corrigenda, (b)Add extra over the rate of ground floor /initial 4m for each basement floor and each additional floor below/ above ground floor (i) Upto 4 th floor roof in each addl. Floor (ii) Tor steel (12 ,10 ,8 mm) 1.10 % of Concrete Volume (58662+48=58710)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof) (P.No.42, T/36/a) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge (d) Extra for works beyond the roof of ground floor per additional floor (i) upto 4th (per floor) and in basement. 1ST FLOOR

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary .[Excluding cost of chipping over concrete surface] 10mm thick plastering at ceiling of roof slab beam etc. with cement mortar (1:4) at 1st.floor P.no. 189, T/ii/c) With 1:6 cement mortar

(b) 20 mm thick plaster in 1st floor (i) External plaster & (ii) Internal plaster ,(a) Upto 4th floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 20 mm. thick

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc NOTE : Cement 0.152 cu.m. per 100 sq.m. Page .No-192 , Item No-15

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat (P-196, T/8(a))

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats / In Ground floor a) Normal Acrylic Emulsion (P-197, T/8)

Add GST @ 18%

Add Cess 1%