Construction of Multi Purpose Building at Melachinthalavadi in Chinthalavadi Panchayat

Name of the Work : Construction of Multi Purpose Building @ Melachinthalavadi H/O Chinthalavadi Panchayat

Earthwork excavation for foundation in all claues of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc., complete complying with standard specification

Supply and filling of Conveyed Earth with a lead of 5 Km for basement filling

Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm ISS HBG metal for foundation & flooring including labour charges etc., complete

Brick Work cm 1:5 mix (One Cement anf Five Sand) using Country bricks ground maded of size 23x11x7 cm including cost and Conveyance of all materials etc., complete

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S 5 angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props o 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Grade Beam Allround, Cross Beam, Footing, Main Building Column

Sunshade, Roof Bottom, Slab Side, Door bottom, Window bottom

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC Items of work excluding items of works excluding centering, shuttering, and ost of reinforcement grill, out Including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Plastering surfaces of RCC items such as slabs, beams, sunshades with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase, steps, lands slabs etc., as directed by departmental officers etc, complete complying with standard specifications.

Plastering with cm 1:5 mix( one cement and five sand) to 12 mm thick including 9 cost and conveyance of all materials in all floors etc., as directed by departmental officers etc, complete complying with standard specifications.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, 10 finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick 11 jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc.

Finishing top roof mix one course machine pressed tiles of size 20 cm x 12 20 cm x 2 cm approved qty with, CM. 1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc

Distembering two coats of oil bound distember using one coat of primer coat Including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved 14 qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete.

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 26x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer.

Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer.

Fabricating Supply and fixing and position of MS Ventilator with two leave. The window cuter frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer.

Painting two coats of new iron work with best quality synthetic enamel 18 paint of approved quality and colour with priming coat including the cost all materials etc..complete, in all floors.

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends, & clamps etc

Supply and Fixing of Cudappah slab including cost and all labour charges

Supplying and fixing following electrical arrangement

Wiring with2-1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu. Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC a accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable color for open PVC light point and fan point ( SD 17)

Supply and fixing of Single box type 4'36Watts Flu Fitting complete with Electronic Ballast With TW round Block On Wall or Ceilling With Flu Tube With PVC unsheathed Copper Leads from Terminal to the Tube Light Fiittings (SD 87)

Supply and fixing of single Type street light Flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light (SD 94)

Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of d 1100 V garde in 25 mm dia Gl pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains (SD69)

Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed e Cu conductor of 1100 v on 7/20 Gi bearer wire for service connection main (SD 64)

Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral side handle) on suitable TW/PWD Earthing SD135 Service main

Supplying and fixing of 1200mm(40")AC Ceiling fan with stepped 110 electronic 300W regulator with 1m down rod on the existing clamp (SD 407)

Wiring with 2*1.5 mm2 (22/3) pvc insulated unsheathed sc unsheated Cu Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with 150x100x113Tw switch box for SA3 pin non iter locking with painting of suitable colour with continuous earth connection 14SWG TC wire for open PVC PLUG POINT (SD 36)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information