Construction of Centre Excellence in Mental Health For Dr R.P. Govt. Medical College Kangra at Tanda in Distt Kangra (HP)

Amount

Finishing walls with priming coat of exterior primer applied @ 2.20kg/10sqm of approved brand and manufacture including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge.

Providing and fixing Fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.50mm dia all complete and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing wood lipping/ moulded beading of size 37 mm wide fixed with wooden adhesive of approved quality and screws/nails including polishing on the gapof aluminium as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals.

providing and fixing 150mm wide ACP sheet 3mm thick with pvc gatties and screw on horizontel/vertical expension joint one side fixed and one side fixed slotted holes to allow movement complete in all respect as per specification and to the entire satisfaction of Engineer in charge as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Cutting holes up to 11.5 cm dia in R.C.C. floors and roofs and repairing the hole after insertion of drain pipes etc.and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium handles(Americian ), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing & fixing 6mm (Six millimetre) thick Tinted Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing & applying heritage granular homogeneous wall finishing system from bakelite coating and paint Pvt. consisting of two componenet system of dry granular (25 kg/pack) Twenty five kilogram per pack) made of 92% (Ninety two percent) silice partical coated with fade resistant pigments and 100% (one hundred acrylic co-polymers bonding agent 5 ltr pack (Five liter per pack) with the applied in single coat on a curved level smooth plastered as per the shade of combination approved and as per manufacture specifications including primer on base coat complete and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

Shadil Thakur